diff mbox series

[v4,11/41] i2c: add HAS_IOPORT dependencies

Message ID 20230516110038.2413224-12-schnelle@linux.ibm.com (mailing list archive)
State Superseded
Headers show
Series treewide: Remove I/O port accessors for HAS_IOPORT=n | expand

Commit Message

Niklas Schnelle May 16, 2023, 11 a.m. UTC 
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
      per-subsystem patches may be applied independently

 drivers/i2c/busses/Kconfig | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

Comments

Wolfram Sang June 5, 2023, 10:12 a.m. UTC | #1 
On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>

What has changed since V3? I didn't get the coverletter...
Niklas Schnelle June 5, 2023, 12:01 p.m. UTC | #2 
On Mon, 2023-06-05 at 12:12 +0200, Wolfram Sang wrote:
> On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> > 
> > Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> 
> What has changed since V3? I didn't get the coverletter...
> 

The series is actually now at v5 that can be found in its entirety
here:
https://lore.kernel.org/all/20230522105049.1467313-1-schnelle@linux.ibm.com/

I believe there were no changes for the i2c portion since v3. Other
that with the HAS_IOPORT Kconfig option merged the per-subsystem
patches are now independent and can be merged directly.

Thanks,
Niklas
Uwe Kleine-König June 5, 2023, 12:01 p.m. UTC | #3 
Hello Wolfram,

On Mon, Jun 05, 2023 at 12:12:35PM +0200, Wolfram Sang wrote:
> On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> > 
> > Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> 
> What has changed since V3? I didn't get the coverletter...

lore has it:
https://lore.kernel.org/all/20230516110038.2413224-1-schnelle@linux.ibm.com/

(Found via: https://lore.kernel.org/all/ZH21E3Obp+YPJHkl@shikoro where
the last part of the URL is the Message-Id of your mail.)

Best regards
Uwe
Wolfram Sang June 5, 2023, 12:55 p.m. UTC | #4 
> (Found via: https://lore.kernel.org/all/ZH21E3Obp+YPJHkl@shikoro where
> the last part of the URL is the Message-Id of your mail.)

I know how I could get it. Just, for scaling reasons it is better if
people send it right away. OK, I should have said that directly :)

Please send also cover-letters to mailing lists.
Wolfram Sang June 5, 2023, 8:05 p.m. UTC | #5 
Hi,

> I believe there were no changes for the i2c portion since v3. Other
> that with the HAS_IOPORT Kconfig option merged the per-subsystem
> patches are now independent and can be merged directly.

Thanks for the feedback.

Only issue is then that PARPORT is still in there. Didn't you want to
drop it as mentioned in http://patchwork.ozlabs.org/project/linux-i2c/patch/20211227164317.4146918-11-schnelle@linux.ibm.com/ ?

And from the same mail, did you reach a conclusion what to do with the
ocores driver?

Happy hacking,

   Wolfram
diff mbox series

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87600b4aacb3..6e89944fb8e9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -18,7 +18,7 @@  config I2C_CCGX_UCSI
 
 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@@ -30,7 +30,7 @@  config I2C_ALI1535
 
 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@@ -42,7 +42,7 @@  config I2C_ALI1563
 
 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -52,7 +52,7 @@  config I2C_ALI15X3
 
 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@@ -77,7 +77,7 @@  config I2C_AMD756_S4882
 
 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -107,7 +107,7 @@  config I2C_HIX5HD2
 
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
@@ -164,7 +164,7 @@  config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -185,7 +185,7 @@  config I2C_ISMT
 
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
@@ -231,7 +231,7 @@  config I2C_CHT_WC
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Nvidia
 	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -264,7 +264,7 @@  config I2C_NVIDIA_GPU
 
 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
@@ -274,7 +274,7 @@  config I2C_SIS5595
 
 config I2C_SIS630
 	tristate "SiS 630/730/964"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -284,7 +284,7 @@  config I2C_SIS630
 
 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
@@ -302,7 +302,7 @@  config I2C_SIS96X
 
 config I2C_VIA
 	tristate "VIA VT82C586B"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -313,7 +313,7 @@  config I2C_VIA
 
 config I2C_VIAPRO
 	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  VT82C596 and later SMBus interface.  Specifically, the following
@@ -884,6 +884,7 @@  config I2C_NPCM
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
+	depends on HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -1277,6 +1278,7 @@  config I2C_CP2615
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -1385,6 +1387,7 @@  config I2C_ICY
 config I2C_MLXCPLD
 	tristate "Mellanox I2C driver"
 	depends on X86_64 || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  This exposes the Mellanox platform I2C busses to the linux I2C layer
 	  for X86 based systems.