diff mbox series

[v3,3/8] PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0

Message ID 20230601163900.15500-4-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series PCI: qcom: Do not advertise hotplug capability | expand

Commit Message

Manivannan Sadhasivam June 1, 2023, 4:38 p.m. UTC 
SoCs making use of Qcom PCIe controller IPs v2.7.0 and v1.9.0 do not
support hotplug functionality. But the hotplug capability bit is set by
default in the hardware. This causes the kernel PCI core to register
hotplug service for the controller and send hotplug commands to it. But
those commands will timeout generating messages as below during boot and
suspend/resume.

[    5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[    5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[    7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[    7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)

This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's clear the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 391a45d1e70a..8f448156eccc 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -270,6 +270,20 @@  static int qcom_pcie_start_link(struct dw_pcie *pci)
 	return 0;
 }
 
+static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
+{
+	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+	u32 val;
+
+	dw_pcie_dbi_ro_wr_en(pci);
+
+	val = readl(pci->dbi_base + offset + PCI_EXP_SLTCAP);
+	val &= ~PCI_EXP_SLTCAP_HPC;
+	writel(val, pci->dbi_base + offset + PCI_EXP_SLTCAP);
+
+	dw_pcie_dbi_ro_wr_dis(pci);
+}
+
 static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
@@ -966,6 +980,13 @@  static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	return ret;
 }
 
+static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
+{
+	qcom_pcie_clear_hpc(pcie->pci);
+
+	return 0;
+}
+
 static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
@@ -1272,6 +1293,7 @@  static const struct qcom_pcie_ops ops_2_3_3 = {
 static const struct qcom_pcie_ops ops_2_7_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
@@ -1280,6 +1302,7 @@  static const struct qcom_pcie_ops ops_2_7_0 = {
 static const struct qcom_pcie_ops ops_1_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_7_0,
 	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.config_sid = qcom_pcie_config_sid_1_9_0,