diff mbox series

[v10,resent,3/3] PCI: layerscape: Add power management support for ls1028a

Message ID 20230807165238.569297-4-Frank.Li@nxp.com (mailing list archive)
State Superseded
Headers show
Series dwc general suspend/resume functionality | expand

Commit Message

Frank Li Aug. 7, 2023, 4:52 p.m. UTC
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
suspend state.

Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
 1 file changed, 121 insertions(+), 9 deletions(-)

Comments

Manivannan Sadhasivam Aug. 9, 2023, 6:16 a.m. UTC | #1
On Mon, Aug 07, 2023 at 12:52:38PM -0400, Frank Li wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> 
> Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
> common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
> suspend state.
> 
> Acked-by: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
>  1 file changed, 121 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index ed5fb492fe084..7586aece769b2 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -8,9 +8,11 @@
>   * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/kernel.h>
>  #include <linux/interrupt.h>
>  #include <linux/init.h>
> +#include <linux/iopoll.h>
>  #include <linux/of_pci.h>
>  #include <linux/of_platform.h>
>  #include <linux/of_address.h>
> @@ -20,6 +22,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
>  
> +#include "../../pci.h"
>  #include "pcie-designware.h"
>  
>  /* PEX Internal Configuration Registers */
> @@ -27,12 +30,26 @@
>  #define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
>  #define PCIE_ABSERR_SETTING	0x9401 /* Forward error of non-posted request */
>  
> +/* PF Message Command Register */
> +#define LS_PCIE_PF_MCR		0x2c
> +#define PF_MCR_PTOMR		BIT(0)
> +#define PF_MCR_EXL2S		BIT(1)
> +
>  #define PCIE_IATU_NUM		6
>  
> +struct ls_pcie_drvdata {
> +	const u32 pf_off;
> +	bool pm_support;
> +};
> +
>  struct ls_pcie {
>  	struct dw_pcie *pci;
> +	const struct ls_pcie_drvdata *drvdata;
> +	void __iomem *pf_base;
> +	bool big_endian;
>  };
>  
> +#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
>  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -73,6 +90,60 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
>  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +{
> +	if (pcie->big_endian)
> +		return ioread32be(pcie->pf_base + off);
> +
> +	return ioread32(pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> +	if (pcie->big_endian)
> +		iowrite32be(val, pcie->pf_base + off);
> +	else
> +		iowrite32(val, pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +	int ret;
> +
> +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val |= PF_MCR_PTOMR;
> +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +				 val, !(val & PF_MCR_PTOMR),
> +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret)
> +		dev_err(pcie->pci->dev, "poll turn off message timeout\n");
> +}
> +
> +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +	int ret;
> +
> +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val |= PF_MCR_EXL2S;
> +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +				 val, !(val & PF_MCR_EXL2S),
> +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret)
> +		dev_err(pcie->pci->dev, "poll exit L2 state timeout\n");

I specifically mentioned that you need to change this error message and the one
below before adding my Acked-by tag. But you just added the tag without
incorporating the changes :/

- Mani

> +}
> +
>  static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -91,18 +162,28 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls_pcie_send_turnoff_msg,
> +	.exit_from_l2 = ls_pcie_exit_from_l2,
> +};
> +
> +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> +};
> +
> +static const struct ls_pcie_drvdata layerscape_drvdata = {
> +	.pf_off = 0xc0000,
> +	.pm_support = true,
>  };
>  
>  static const struct of_device_id ls_pcie_of_match[] = {
> -	{ .compatible = "fsl,ls1012a-pcie", },
> -	{ .compatible = "fsl,ls1021a-pcie", },
> -	{ .compatible = "fsl,ls1028a-pcie", },
> -	{ .compatible = "fsl,ls1043a-pcie", },
> -	{ .compatible = "fsl,ls1046a-pcie", },
> -	{ .compatible = "fsl,ls2080a-pcie", },
> -	{ .compatible = "fsl,ls2085a-pcie", },
> -	{ .compatible = "fsl,ls2088a-pcie", },
> -	{ .compatible = "fsl,ls1088a-pcie", },
> +	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
> +	{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
>  	{ },
>  };
>  
> @@ -121,6 +202,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	if (!pci)
>  		return -ENOMEM;
>  
> +	pcie->drvdata = of_device_get_match_data(dev);
> +
>  	pci->dev = dev;
>  	pci->pp.ops = &ls_pcie_host_ops;
>  
> @@ -131,6 +214,10 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	if (IS_ERR(pci->dbi_base))
>  		return PTR_ERR(pci->dbi_base);
>  
> +	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> +
> +	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> @@ -139,12 +226,37 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	return dw_pcie_host_init(&pci->pp);
>  }
>  
> +static int ls_pcie_suspend_noirq(struct device *dev)
> +{
> +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie->drvdata->pm_support)
> +		return 0;
> +
> +	return dw_pcie_suspend_noirq(pcie->pci);
> +}
> +
> +static int ls_pcie_resume_noirq(struct device *dev)
> +{
> +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie->drvdata->pm_support)
> +		return 0;
> +
> +	return dw_pcie_resume_noirq(pcie->pci);
> +}
> +
> +static const struct dev_pm_ops ls_pcie_pm_ops = {
> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, ls_pcie_resume_noirq)
> +};
> +
>  static struct platform_driver ls_pcie_driver = {
>  	.probe = ls_pcie_probe,
>  	.driver = {
>  		.name = "layerscape-pcie",
>  		.of_match_table = ls_pcie_of_match,
>  		.suppress_bind_attrs = true,
> +		.pm = &ls_pcie_pm_ops,
>  	},
>  };
>  builtin_platform_driver(ls_pcie_driver);
> -- 
> 2.34.1
>
Frank Li Aug. 9, 2023, 3:28 p.m. UTC | #2
On Wed, Aug 09, 2023 at 11:46:04AM +0530, Manivannan Sadhasivam wrote:
> On Mon, Aug 07, 2023 at 12:52:38PM -0400, Frank Li wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > 
> > Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
> > common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
> > suspend state.
> > 
> > Acked-by: Manivannan Sadhasivam <mani@kernel.org>
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
> >  1 file changed, 121 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index ed5fb492fe084..7586aece769b2 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -8,9 +8,11 @@
> >   * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
> >   */
> >  
> > +#include <linux/delay.h>
> >  #include <linux/kernel.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/init.h>
> > +#include <linux/iopoll.h>
> >  #include <linux/of_pci.h>
> >  #include <linux/of_platform.h>
> >  #include <linux/of_address.h>
> > @@ -20,6 +22,7 @@
> >  #include <linux/mfd/syscon.h>
> >  #include <linux/regmap.h>
> >  
> > +#include "../../pci.h"
> >  #include "pcie-designware.h"
> >  
> >  /* PEX Internal Configuration Registers */
> > @@ -27,12 +30,26 @@
> >  #define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
> >  #define PCIE_ABSERR_SETTING	0x9401 /* Forward error of non-posted request */
> >  
> > +/* PF Message Command Register */
> > +#define LS_PCIE_PF_MCR		0x2c
> > +#define PF_MCR_PTOMR		BIT(0)
> > +#define PF_MCR_EXL2S		BIT(1)
> > +
> >  #define PCIE_IATU_NUM		6
> >  
> > +struct ls_pcie_drvdata {
> > +	const u32 pf_off;
> > +	bool pm_support;
> > +};
> > +
> >  struct ls_pcie {
> >  	struct dw_pcie *pci;
> > +	const struct ls_pcie_drvdata *drvdata;
> > +	void __iomem *pf_base;
> > +	bool big_endian;
> >  };
> >  
> > +#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
> >  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
> >  
> >  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> > @@ -73,6 +90,60 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> >  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
> >  }
> >  
> > +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> > +{
> > +	if (pcie->big_endian)
> > +		return ioread32be(pcie->pf_base + off);
> > +
> > +	return ioread32(pcie->pf_base + off);
> > +}
> > +
> > +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> > +{
> > +	if (pcie->big_endian)
> > +		iowrite32be(val, pcie->pf_base + off);
> > +	else
> > +		iowrite32(val, pcie->pf_base + off);
> > +}
> > +
> > +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +	int ret;
> > +
> > +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > +	val |= PF_MCR_PTOMR;
> > +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > +				 val, !(val & PF_MCR_PTOMR),
> > +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> > +				 PCIE_PME_TO_L2_TIMEOUT_US);
> > +	if (ret)
> > +		dev_err(pcie->pci->dev, "poll turn off message timeout\n");
> > +}
> > +
> > +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +	int ret;
> > +
> > +	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > +	val |= PF_MCR_EXL2S;
> > +	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > +	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > +				 val, !(val & PF_MCR_EXL2S),
> > +				 PCIE_PME_TO_L2_TIMEOUT_US/10,
> > +				 PCIE_PME_TO_L2_TIMEOUT_US);
> > +	if (ret)
> > +		dev_err(pcie->pci->dev, "poll exit L2 state timeout\n");
> 
> I specifically mentioned that you need to change this error message and the one
> below before adding my Acked-by tag. But you just added the tag without
> incorporating the changes :/

Sorry, I found I forget run 'git add' when I run git commit --amend.
Change just leave in local tree.

Will Send v11.

Frank

> 
> - Mani
> 
> > +}
> > +
> >  static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > @@ -91,18 +162,28 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> >  
> >  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> >  	.host_init = ls_pcie_host_init,
> > +	.pme_turn_off = ls_pcie_send_turnoff_msg,
> > +	.exit_from_l2 = ls_pcie_exit_from_l2,
> > +};
> > +
> > +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > +};
> > +
> > +static const struct ls_pcie_drvdata layerscape_drvdata = {
> > +	.pf_off = 0xc0000,
> > +	.pm_support = true,
> >  };
> >  
> >  static const struct of_device_id ls_pcie_of_match[] = {
> > -	{ .compatible = "fsl,ls1012a-pcie", },
> > -	{ .compatible = "fsl,ls1021a-pcie", },
> > -	{ .compatible = "fsl,ls1028a-pcie", },
> > -	{ .compatible = "fsl,ls1043a-pcie", },
> > -	{ .compatible = "fsl,ls1046a-pcie", },
> > -	{ .compatible = "fsl,ls2080a-pcie", },
> > -	{ .compatible = "fsl,ls2085a-pcie", },
> > -	{ .compatible = "fsl,ls2088a-pcie", },
> > -	{ .compatible = "fsl,ls1088a-pcie", },
> > +	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> > +	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> > +	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
> > +	{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
> >  	{ },
> >  };
> >  
> > @@ -121,6 +202,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  	if (!pci)
> >  		return -ENOMEM;
> >  
> > +	pcie->drvdata = of_device_get_match_data(dev);
> > +
> >  	pci->dev = dev;
> >  	pci->pp.ops = &ls_pcie_host_ops;
> >  
> > @@ -131,6 +214,10 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  	if (IS_ERR(pci->dbi_base))
> >  		return PTR_ERR(pci->dbi_base);
> >  
> > +	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> > +
> > +	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> > +
> >  	if (!ls_pcie_is_bridge(pcie))
> >  		return -ENODEV;
> >  
> > @@ -139,12 +226,37 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  	return dw_pcie_host_init(&pci->pp);
> >  }
> >  
> > +static int ls_pcie_suspend_noirq(struct device *dev)
> > +{
> > +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> > +
> > +	if (!pcie->drvdata->pm_support)
> > +		return 0;
> > +
> > +	return dw_pcie_suspend_noirq(pcie->pci);
> > +}
> > +
> > +static int ls_pcie_resume_noirq(struct device *dev)
> > +{
> > +	struct ls_pcie *pcie = dev_get_drvdata(dev);
> > +
> > +	if (!pcie->drvdata->pm_support)
> > +		return 0;
> > +
> > +	return dw_pcie_resume_noirq(pcie->pci);
> > +}
> > +
> > +static const struct dev_pm_ops ls_pcie_pm_ops = {
> > +	NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, ls_pcie_resume_noirq)
> > +};
> > +
> >  static struct platform_driver ls_pcie_driver = {
> >  	.probe = ls_pcie_probe,
> >  	.driver = {
> >  		.name = "layerscape-pcie",
> >  		.of_match_table = ls_pcie_of_match,
> >  		.suppress_bind_attrs = true,
> > +		.pm = &ls_pcie_pm_ops,
> >  	},
> >  };
> >  builtin_platform_driver(ls_pcie_driver);
> > -- 
> > 2.34.1
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index ed5fb492fe084..7586aece769b2 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -8,9 +8,11 @@ 
  * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
  */
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -20,6 +22,7 @@ 
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 /* PEX Internal Configuration Registers */
@@ -27,12 +30,26 @@ 
 #define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
 #define PCIE_ABSERR_SETTING	0x9401 /* Forward error of non-posted request */
 
+/* PF Message Command Register */
+#define LS_PCIE_PF_MCR		0x2c
+#define PF_MCR_PTOMR		BIT(0)
+#define PF_MCR_EXL2S		BIT(1)
+
 #define PCIE_IATU_NUM		6
 
+struct ls_pcie_drvdata {
+	const u32 pf_off;
+	bool pm_support;
+};
+
 struct ls_pcie {
 	struct dw_pcie *pci;
+	const struct ls_pcie_drvdata *drvdata;
+	void __iomem *pf_base;
+	bool big_endian;
 };
 
+#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
 
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -73,6 +90,60 @@  static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
 }
 
+static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+{
+	if (pcie->big_endian)
+		return ioread32be(pcie->pf_base + off);
+
+	return ioread32(pcie->pf_base + off);
+}
+
+static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+{
+	if (pcie->big_endian)
+		iowrite32be(val, pcie->pf_base + off);
+	else
+		iowrite32(val, pcie->pf_base + off);
+}
+
+static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+	int ret;
+
+	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val |= PF_MCR_PTOMR;
+	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+
+	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+				 val, !(val & PF_MCR_PTOMR),
+				 PCIE_PME_TO_L2_TIMEOUT_US/10,
+				 PCIE_PME_TO_L2_TIMEOUT_US);
+	if (ret)
+		dev_err(pcie->pci->dev, "poll turn off message timeout\n");
+}
+
+static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+	int ret;
+
+	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val |= PF_MCR_EXL2S;
+	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+
+	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+				 val, !(val & PF_MCR_EXL2S),
+				 PCIE_PME_TO_L2_TIMEOUT_US/10,
+				 PCIE_PME_TO_L2_TIMEOUT_US);
+	if (ret)
+		dev_err(pcie->pci->dev, "poll exit L2 state timeout\n");
+}
+
 static int ls_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -91,18 +162,28 @@  static int ls_pcie_host_init(struct dw_pcie_rp *pp)
 
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls_pcie_send_turnoff_msg,
+	.exit_from_l2 = ls_pcie_exit_from_l2,
+};
+
+static const struct ls_pcie_drvdata ls1021a_drvdata = {
+};
+
+static const struct ls_pcie_drvdata layerscape_drvdata = {
+	.pf_off = 0xc0000,
+	.pm_support = true,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
-	{ .compatible = "fsl,ls1012a-pcie", },
-	{ .compatible = "fsl,ls1021a-pcie", },
-	{ .compatible = "fsl,ls1028a-pcie", },
-	{ .compatible = "fsl,ls1043a-pcie", },
-	{ .compatible = "fsl,ls1046a-pcie", },
-	{ .compatible = "fsl,ls2080a-pcie", },
-	{ .compatible = "fsl,ls2085a-pcie", },
-	{ .compatible = "fsl,ls2088a-pcie", },
-	{ .compatible = "fsl,ls1088a-pcie", },
+	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
 	{ },
 };
 
@@ -121,6 +202,8 @@  static int ls_pcie_probe(struct platform_device *pdev)
 	if (!pci)
 		return -ENOMEM;
 
+	pcie->drvdata = of_device_get_match_data(dev);
+
 	pci->dev = dev;
 	pci->pp.ops = &ls_pcie_host_ops;
 
@@ -131,6 +214,10 @@  static int ls_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
 
+	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
+
+	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+
 	if (!ls_pcie_is_bridge(pcie))
 		return -ENODEV;
 
@@ -139,12 +226,37 @@  static int ls_pcie_probe(struct platform_device *pdev)
 	return dw_pcie_host_init(&pci->pp);
 }
 
+static int ls_pcie_suspend_noirq(struct device *dev)
+{
+	struct ls_pcie *pcie = dev_get_drvdata(dev);
+
+	if (!pcie->drvdata->pm_support)
+		return 0;
+
+	return dw_pcie_suspend_noirq(pcie->pci);
+}
+
+static int ls_pcie_resume_noirq(struct device *dev)
+{
+	struct ls_pcie *pcie = dev_get_drvdata(dev);
+
+	if (!pcie->drvdata->pm_support)
+		return 0;
+
+	return dw_pcie_resume_noirq(pcie->pci);
+}
+
+static const struct dev_pm_ops ls_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, ls_pcie_resume_noirq)
+};
+
 static struct platform_driver ls_pcie_driver = {
 	.probe = ls_pcie_probe,
 	.driver = {
 		.name = "layerscape-pcie",
 		.of_match_table = ls_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &ls_pcie_pm_ops,
 	},
 };
 builtin_platform_driver(ls_pcie_driver);