@@ -3,6 +3,8 @@
* BIOS32 and PCI BIOS handling.
*/
+#include <linux/bits.h>
+#include <linux/bitfield.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -29,8 +31,19 @@
#define PCIBIOS_HW_TYPE1_SPEC 0x10
#define PCIBIOS_HW_TYPE2_SPEC 0x20
+/*
+ * Returned in EAX:
+ * - AH: return code
+ */
+#define PCIBIOS_RETURN_CODE GENMASK(15, 8)
+
int pcibios_enabled;
+static u8 pcibios_get_return_code(u32 eax)
+{
+ return FIELD_GET(PCIBIOS_RETURN_CODE, eax);
+}
+
/* According to the BIOS specification at:
* http://members.datafast.net.au/dft0802/specs/bios21.pdf, we could
* restrict the x zone to some pages and make it ro. But this may be
@@ -154,7 +167,7 @@ static int __init check_pcibios(void)
: "memory");
local_irq_restore(flags);
- status = (eax >> 8) & 0xff;
+ status = pcibios_get_return_code(eax);
hw_mech = eax & 0xff;
major_ver = (ebx >> 8) & 0xff;
minor_ver = ebx & 0xff;
@@ -227,7 +240,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return pcibios_get_return_code(result);
}
static int pci_bios_write(unsigned int seg, unsigned int bus,
@@ -269,7 +282,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
- return (int)((result & 0xff00) >> 8);
+ return pcibios_get_return_code(result);
}
@@ -385,9 +398,10 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
"m" (opt)
: "memory");
DBG("OK ret=%d, size=%d, map=%x\n", ret, opt.size, map);
- if (ret & 0xff00)
- printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
- else if (opt.size) {
+ ret = pcibios_get_return_code(ret);
+ if (ret) {
+ printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", ret);
+ } else if (opt.size) {
rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
if (rt) {
memset(rt, 0, sizeof(struct irq_routing_table));
@@ -415,7 +429,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
"b" ((dev->bus->number << 8) | dev->devfn),
"c" ((irq << 8) | (pin + 10)),
"S" (&pci_indirect));
- return !(ret & 0xff00);
+ return pcibios_get_return_code(ret) == PCIBIOS_SUCCESSFUL;
}
EXPORT_SYMBOL(pcibios_set_irq_routing);
PCI BIOS returns a return code in 8 bits of eax register which is extracted by open-coded masks and shifting currently. Name the return code bits with a define and introduce pcibios_get_return_code() helper to extract the return code to improve code readability. In addition, replace zero test with PCIBIOS_SUCCESSFUL. No function changes intended. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- v3: - Add braces around the touched if block v2: - Improve changelog - Add helper to avoid repeating FIELD_GET() - Reuse existing ret variable in pcibios_get_irq_routing_table() arch/x86/pci/pcbios.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-)