diff mbox series

[v3,02/13] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY

Message ID 20231211215842.134823-3-Frank.Li@nxp.com (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: imx6: Clean up and add imx95 pci support | expand

Commit Message

Frank Li Dec. 11, 2023, 9:58 p.m. UTC
Refactors the phy handling logic in the imx6 PCI driver by adding
IMX6_PCIE_FLAG_HAS_PHY bitmask define for drvdata::flags.

The drvdata::flags and a bitmask ensures a cleaner and more scalable
switch-case structure for handling phy.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v1 to v3:
    - none

 drivers/pci/controller/dwc/pci-imx6.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 8a9b527934f80..bcf52aa86462e 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -62,6 +62,7 @@  enum imx6_pcie_variants {
 #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
 #define IMX6_PCIE_FLAG_HAS_CLK_INBOUND_AXI	BIT(3)
 #define IMX6_PCIE_FLAG_HAS_CLK_AUX		BIT(4)
+#define IMX6_PCIE_FLAG_HAS_PHY			BIT(5)
 
 #define imx6_check_flag(pci, val)	(pci->drvdata->flags & val)
 
@@ -1327,6 +1328,13 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 					     "pcie_aux clock source missing or invalid\n");
 	}
 
+	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY)) {
+		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+		if (IS_ERR(imx6_pcie->phy))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+					     "failed to get pcie phy\n");
+	}
+
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
@@ -1356,11 +1364,6 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
 					     "failed to get pcie apps reset control\n");
 
-		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
-		if (IS_ERR(imx6_pcie->phy))
-			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
-					     "failed to get pcie phy\n");
-
 		break;
 	default:
 		break;
@@ -1500,24 +1503,28 @@  static const struct imx6_pcie_drvdata drvdata[] = {
 	[IMX8MM] = {
 		.variant = IMX8MM,
 		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
-			 IMX6_PCIE_FLAG_HAS_CLK_AUX,
+			 IMX6_PCIE_FLAG_HAS_CLK_AUX |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 	},
 	[IMX8MP] = {
 		.variant = IMX8MP,
 		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
-			 IMX6_PCIE_FLAG_HAS_CLK_AUX,
+			 IMX6_PCIE_FLAG_HAS_CLK_AUX |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 	},
 	[IMX8MQ_EP] = {
 		.variant = IMX8MQ_EP,
-		.flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
+		.flags = IMX6_PCIE_FLAG_HAS_CLK_AUX |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mq-iomuxc-gpr",
 	},
 	[IMX8MM_EP] = {
 		.variant = IMX8MM_EP,
-		.flags = IMX6_PCIE_FLAG_HAS_CLK_AUX,
+		.flags = IMX6_PCIE_FLAG_HAS_CLK_AUX |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 	},