| Message ID | 20231214062847.2215542-7-quic_ipkumar@quicinc.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Add PCIe support for Qualcomm IPQ5332 | expand |
On Thu, 14 Dec 2023 at 08:30, Praveenkumar I <quic_ipkumar@quicinc.com> wrote: > > Add support for single-lane and dual-lane PCIe UNIPHY found on > Qualcomm IPQ5332 platform. This UNIPHY is similar to the one > present in Qualcomm IPQ5018. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > --- > This patch depends on the below series which adds PCIe support in > Qualcomm IPQ5018 > https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/ > > .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 44 +++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c > index 9f9a03faf6fa..aa71b85eb50e 100644 > --- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c > +++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c > @@ -34,6 +34,10 @@ > #define SSCG_CTRL_REG_6 0xb0 > #define PCS_INTERNAL_CONTROL_2 0x2d8 > > +#define PHY_CFG_PLLCFG 0x220 > +#define PHY_CFG_EIOS_DTCT_REG 0x3e4 > +#define PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME 0x3e8 > + > #define PHY_MODE_FIXED 0x1 > > enum qcom_uniphy_pcie_type { > @@ -112,6 +116,21 @@ static const struct uniphy_regs ipq5018_regs[] = { > }, > }; > > +static const struct uniphy_regs ipq5332_regs[] = { > + { > + .offset = PHY_CFG_PLLCFG, > + .val = 0x30, > + }, > + { > + .offset = PHY_CFG_EIOS_DTCT_REG, > + .val = 0x53ef, > + }, > + { > + .offset = PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME, > + .val = 0xCf, > + }, > +}; > + > static const struct uniphy_pcie_data ipq5018_2x2_data = { > .lanes = 2, > .lane_offset = 0x800, > @@ -121,6 +140,23 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = { > .pipe_clk_rate = 125000000, > }; > > +static const struct uniphy_pcie_data ipq5332_x2_data = { > + .lanes = 2, > + .lane_offset = 0x800, > + .phy_type = PHY_TYPE_PCIE_GEN3, > + .init_seq = ipq5332_regs, > + .init_seq_num = ARRAY_SIZE(ipq5332_regs), > + .pipe_clk_rate = 250000000, > +}; > + > +static const struct uniphy_pcie_data ipq5332_x1_data = { > + .lanes = 1, > + .phy_type = PHY_TYPE_PCIE_GEN3, > + .init_seq = ipq5332_regs, > + .init_seq_num = ARRAY_SIZE(ipq5332_regs), > + .pipe_clk_rate = 250000000, > +}; Please keep structs sorted out. > + > static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy) > { > const struct uniphy_pcie_data *data = phy->data; > @@ -270,6 +306,14 @@ static const struct of_device_id qcom_uniphy_pcie_id_table[] = { > .compatible = "qcom,ipq5018-uniphy-pcie-gen2x2", > .data = &ipq5018_2x2_data, > }, > + { > + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x2", > + .data = &ipq5332_x2_data, > + }, > + { > + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x1", > + .data = &ipq5332_x1_data, The entries here should be sorted out. > + }, > { /* Sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, qcom_uniphy_pcie_id_table); > -- > 2.34.1 > >
On 12/14/2023 12:42 PM, Dmitry Baryshkov wrote: > On Thu, 14 Dec 2023 at 08:30, Praveenkumar I <quic_ipkumar@quicinc.com> wrote: >> Add support for single-lane and dual-lane PCIe UNIPHY found on >> Qualcomm IPQ5332 platform. This UNIPHY is similar to the one >> present in Qualcomm IPQ5018. >> >> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> >> --- >> This patch depends on the below series which adds PCIe support in >> Qualcomm IPQ5018 >> https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/ >> >> .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 44 +++++++++++++++++++ >> 1 file changed, 44 insertions(+) >> >> diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c >> index 9f9a03faf6fa..aa71b85eb50e 100644 >> --- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c >> +++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c >> @@ -34,6 +34,10 @@ >> #define SSCG_CTRL_REG_6 0xb0 >> #define PCS_INTERNAL_CONTROL_2 0x2d8 >> >> +#define PHY_CFG_PLLCFG 0x220 >> +#define PHY_CFG_EIOS_DTCT_REG 0x3e4 >> +#define PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME 0x3e8 >> + >> #define PHY_MODE_FIXED 0x1 >> >> enum qcom_uniphy_pcie_type { >> @@ -112,6 +116,21 @@ static const struct uniphy_regs ipq5018_regs[] = { >> }, >> }; >> >> +static const struct uniphy_regs ipq5332_regs[] = { >> + { >> + .offset = PHY_CFG_PLLCFG, >> + .val = 0x30, >> + }, >> + { >> + .offset = PHY_CFG_EIOS_DTCT_REG, >> + .val = 0x53ef, >> + }, >> + { >> + .offset = PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME, >> + .val = 0xCf, >> + }, >> +}; >> + >> static const struct uniphy_pcie_data ipq5018_2x2_data = { >> .lanes = 2, >> .lane_offset = 0x800, >> @@ -121,6 +140,23 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = { >> .pipe_clk_rate = 125000000, >> }; >> >> +static const struct uniphy_pcie_data ipq5332_x2_data = { >> + .lanes = 2, >> + .lane_offset = 0x800, >> + .phy_type = PHY_TYPE_PCIE_GEN3, >> + .init_seq = ipq5332_regs, >> + .init_seq_num = ARRAY_SIZE(ipq5332_regs), >> + .pipe_clk_rate = 250000000, >> +}; >> + >> +static const struct uniphy_pcie_data ipq5332_x1_data = { >> + .lanes = 1, >> + .phy_type = PHY_TYPE_PCIE_GEN3, >> + .init_seq = ipq5332_regs, >> + .init_seq_num = ARRAY_SIZE(ipq5332_regs), >> + .pipe_clk_rate = 250000000, >> +}; > Please keep structs sorted out. sure, will address in next patch set. > >> + >> static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy) >> { >> const struct uniphy_pcie_data *data = phy->data; >> @@ -270,6 +306,14 @@ static const struct of_device_id qcom_uniphy_pcie_id_table[] = { >> .compatible = "qcom,ipq5018-uniphy-pcie-gen2x2", >> .data = &ipq5018_2x2_data, >> }, >> + { >> + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x2", >> + .data = &ipq5332_x2_data, >> + }, >> + { >> + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x1", >> + .data = &ipq5332_x1_data, > The entries here should be sorted out. will take care. > >> + }, >> { /* Sentinel */ }, >> }; >> MODULE_DEVICE_TABLE(of, qcom_uniphy_pcie_id_table); >> -- >> 2.34.1 >> >> > -- Thanks, Praveenkumar
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c index 9f9a03faf6fa..aa71b85eb50e 100644 --- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c +++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c @@ -34,6 +34,10 @@ #define SSCG_CTRL_REG_6 0xb0 #define PCS_INTERNAL_CONTROL_2 0x2d8 +#define PHY_CFG_PLLCFG 0x220 +#define PHY_CFG_EIOS_DTCT_REG 0x3e4 +#define PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME 0x3e8 + #define PHY_MODE_FIXED 0x1 enum qcom_uniphy_pcie_type { @@ -112,6 +116,21 @@ static const struct uniphy_regs ipq5018_regs[] = { }, }; +static const struct uniphy_regs ipq5332_regs[] = { + { + .offset = PHY_CFG_PLLCFG, + .val = 0x30, + }, + { + .offset = PHY_CFG_EIOS_DTCT_REG, + .val = 0x53ef, + }, + { + .offset = PHY_CFG_GEN3_ALIGN_HOLDOFF_TIME, + .val = 0xCf, + }, +}; + static const struct uniphy_pcie_data ipq5018_2x2_data = { .lanes = 2, .lane_offset = 0x800, @@ -121,6 +140,23 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = { .pipe_clk_rate = 125000000, }; +static const struct uniphy_pcie_data ipq5332_x2_data = { + .lanes = 2, + .lane_offset = 0x800, + .phy_type = PHY_TYPE_PCIE_GEN3, + .init_seq = ipq5332_regs, + .init_seq_num = ARRAY_SIZE(ipq5332_regs), + .pipe_clk_rate = 250000000, +}; + +static const struct uniphy_pcie_data ipq5332_x1_data = { + .lanes = 1, + .phy_type = PHY_TYPE_PCIE_GEN3, + .init_seq = ipq5332_regs, + .init_seq_num = ARRAY_SIZE(ipq5332_regs), + .pipe_clk_rate = 250000000, +}; + static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy) { const struct uniphy_pcie_data *data = phy->data; @@ -270,6 +306,14 @@ static const struct of_device_id qcom_uniphy_pcie_id_table[] = { .compatible = "qcom,ipq5018-uniphy-pcie-gen2x2", .data = &ipq5018_2x2_data, }, + { + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x2", + .data = &ipq5332_x2_data, + }, + { + .compatible = "qcom,ipq5332-uniphy-pcie-gen3x1", + .data = &ipq5332_x1_data, + }, { /* Sentinel */ }, }; MODULE_DEVICE_TABLE(of, qcom_uniphy_pcie_id_table);
Add support for single-lane and dual-lane PCIe UNIPHY found on Qualcomm IPQ5332 platform. This UNIPHY is similar to the one present in Qualcomm IPQ5018. Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> --- This patch depends on the below series which adds PCIe support in Qualcomm IPQ5018 https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/ .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+)