@@ -4,6 +4,7 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
@@ -192,17 +193,20 @@ static int aplic_direct_starting_cpu(unsigned int cpu)
}
static int aplic_direct_parse_parent_hwirq(struct device *dev, u32 index,
- u32 *parent_hwirq, unsigned long *parent_hartid)
+ u32 *parent_hwirq, unsigned long *parent_hartid,
+ struct aplic_priv *priv)
{
struct of_phandle_args parent;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!is_of_node(dev->fwnode))
- return -EINVAL;
+ if (!is_of_node(dev->fwnode)) {
+ rc = acpi_get_ext_intc_parent_hartid(priv->id, index, parent_hartid);
+ if (rc)
+ return rc;
+
+ *parent_hwirq = RV_IRQ_EXT;
+ return 0;
+ }
rc = of_irq_parse_one(to_of_node(dev->fwnode), index, &parent);
if (rc)
@@ -240,7 +244,7 @@ int aplic_direct_setup(struct device *dev, void __iomem *regs)
/* Setup per-CPU IDC and target CPU mask */
current_cpu = get_cpu();
for (i = 0; i < priv->nr_idcs; i++) {
- rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid);
+ rc = aplic_direct_parse_parent_hwirq(dev, i, &hwirq, &hartid, priv);
if (rc) {
dev_warn(dev, "parent irq for IDC%d not found\n", i);
continue;
@@ -4,8 +4,10 @@
* Copyright (C) 2022 Ventana Micro Systems Inc.
*/
+#include <linux/acpi.h>
#include <linux/bitfield.h>
#include <linux/irqchip/riscv-aplic.h>
+#include <linux/irqchip/riscv-imsic.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
@@ -125,39 +127,50 @@ static void aplic_init_hw_irqs(struct aplic_priv *priv)
writel(0, priv->regs + APLIC_DOMAINCFG);
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id aplic_acpi_match[] = {
+ { "RSCV0002", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, aplic_acpi_match);
+
+#endif
+
int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, void __iomem *regs)
{
struct of_phandle_args parent;
int rc;
- /*
- * Currently, only OF fwnode is supported so extend this
- * function for ACPI support.
- */
- if (!is_of_node(dev->fwnode))
- return -EINVAL;
-
/* Save device pointer and register base */
priv->dev = dev;
priv->regs = regs;
- /* Find out number of interrupt sources */
- rc = of_property_read_u32(to_of_node(dev->fwnode), "riscv,num-sources",
- &priv->nr_irqs);
- if (rc) {
- dev_err(dev, "failed to get number of interrupt sources\n");
- return rc;
- }
-
- /*
- * Find out number of IDCs based on parent interrupts
- *
- * If "msi-parent" property is present then we ignore the
- * APLIC IDCs which forces the APLIC driver to use MSI mode.
- */
- if (!of_property_present(to_of_node(dev->fwnode), "msi-parent")) {
- while (!of_irq_parse_one(to_of_node(dev->fwnode), priv->nr_idcs, &parent))
- priv->nr_idcs++;
+ if (is_of_node(dev->fwnode)) {
+ /* Find out number of interrupt sources */
+ rc = of_property_read_u32(to_of_node(dev->fwnode), "riscv,num-sources",
+ &priv->nr_irqs);
+ if (rc) {
+ dev_err(dev, "failed to get number of interrupt sources\n");
+ return rc;
+ }
+
+ /*
+ * Find out number of IDCs based on parent interrupts
+ *
+ * If "msi-parent" property is present then we ignore the
+ * APLIC IDCs which forces the APLIC driver to use MSI mode.
+ */
+ if (!of_property_present(to_of_node(dev->fwnode), "msi-parent")) {
+ while (!of_irq_parse_one(to_of_node(dev->fwnode), priv->nr_idcs, &parent))
+ priv->nr_idcs++;
+ }
+ } else {
+ rc = riscv_acpi_get_gsi_info(dev->fwnode, &priv->gsi_base, &priv->id,
+ &priv->nr_irqs, &priv->nr_idcs);
+ if (rc) {
+ dev_err(dev, "failed to find GSI mapping\n");
+ return rc;
+ }
}
/* Setup initial state APLIC interrupts */
@@ -186,6 +199,9 @@ static int aplic_probe(struct platform_device *pdev)
*/
if (is_of_node(dev->fwnode))
msi_mode = of_property_present(to_of_node(dev->fwnode), "msi-parent");
+ else
+ msi_mode = imsic_acpi_get_fwnode(NULL) ? 1 : 0;
+
if (msi_mode)
rc = aplic_msi_setup(dev, regs);
else
@@ -193,6 +209,11 @@ static int aplic_probe(struct platform_device *pdev)
if (rc)
dev_err(dev, "failed to setup APLIC in %s mode\n", msi_mode ? "MSI" : "direct");
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled)
+ acpi_dev_clear_dependencies(ACPI_COMPANION(dev));
+#endif
+
return rc;
}
@@ -205,6 +226,7 @@ static struct platform_driver aplic_driver = {
.driver = {
.name = "riscv-aplic",
.of_match_table = aplic_match,
+ .acpi_match_table = ACPI_PTR(aplic_acpi_match),
},
.probe = aplic_probe,
};
@@ -28,6 +28,7 @@ struct aplic_priv {
u32 gsi_base;
u32 nr_irqs;
u32 nr_idcs;
+ u32 id;
void __iomem *regs;
struct aplic_msicfg msicfg;
};
@@ -157,6 +157,7 @@ static const struct msi_domain_template aplic_msi_template = {
int aplic_msi_setup(struct device *dev, void __iomem *regs)
{
const struct imsic_global_config *imsic_global;
+ struct irq_domain *msi_domain;
struct aplic_priv *priv;
struct aplic_msicfg *mc;
phys_addr_t pa;
@@ -239,8 +240,14 @@ int aplic_msi_setup(struct device *dev, void __iomem *regs)
* IMSIC and the IMSIC MSI domains are created later through
* the platform driver probing so we set it explicitly here.
*/
- if (is_of_node(dev->fwnode))
+ if (is_of_node(dev->fwnode)) {
of_msi_configure(dev, to_of_node(dev->fwnode));
+ } else {
+ msi_domain = irq_find_matching_fwnode(imsic_acpi_get_fwnode(dev),
+ DOMAIN_BUS_PLATFORM_MSI);
+ if (msi_domain)
+ dev_set_msi_domain(dev, msi_domain);
+ }
}
if (!msi_create_device_irq_domain(dev, MSI_DEFAULT_DOMAIN, &aplic_msi_template,
Add ACPI support in APLIC drivers. It used the namespace device to probe and MADT to get other details required. Use the mapping created early during boot to get the details about the APLIC. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> --- drivers/irqchip/irq-riscv-aplic-direct.c | 20 ++++--- drivers/irqchip/irq-riscv-aplic-main.c | 70 ++++++++++++++++-------- drivers/irqchip/irq-riscv-aplic-main.h | 1 + drivers/irqchip/irq-riscv-aplic-msi.c | 9 ++- 4 files changed, 67 insertions(+), 33 deletions(-)