@@ -6,28 +6,7 @@
* Copyright (C) 2014 ARM Ltd.
*/
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
#include <linux/pci.h>
-#include <linux/pci-acpi.h>
-#include <linux/pci-ecam.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_ACPI
-/*
- * Try to assign the IRQ number when probing a new device
- */
-int pcibios_alloc_irq(struct pci_dev *dev)
-{
- if (!acpi_disabled)
- acpi_pci_irq_enable(dev);
-
- return 0;
-}
-#endif
/*
* raw_pci_read/write - Platform-specific PCI config space access.
@@ -61,173 +40,3 @@ int pcibus_to_node(struct pci_bus *bus)
EXPORT_SYMBOL(pcibus_to_node);
#endif
-
-#ifdef CONFIG_ACPI
-
-struct acpi_pci_generic_root_info {
- struct acpi_pci_root_info common;
- struct pci_config_window *cfg; /* config space mapping */
-};
-
-int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
-{
- struct pci_config_window *cfg = bus->sysdata;
- struct acpi_device *adev = to_acpi_device(cfg->parent);
- struct acpi_pci_root *root = acpi_driver_data(adev);
-
- return root->segment;
-}
-
-int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
-{
- struct pci_config_window *cfg;
- struct acpi_device *adev;
- struct device *bus_dev;
-
- if (acpi_disabled)
- return 0;
-
- cfg = bridge->bus->sysdata;
-
- /*
- * On Hyper-V there is no corresponding ACPI device for a root bridge,
- * therefore ->parent is set as NULL by the driver. And set 'adev' as
- * NULL in this case because there is no proper ACPI device.
- */
- if (!cfg->parent)
- adev = NULL;
- else
- adev = to_acpi_device(cfg->parent);
-
- bus_dev = &bridge->bus->dev;
-
- ACPI_COMPANION_SET(&bridge->dev, adev);
- set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
-
- return 0;
-}
-
-static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
-{
- struct resource_entry *entry, *tmp;
- int status;
-
- status = acpi_pci_probe_root_resources(ci);
- resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
- if (!(entry->res->flags & IORESOURCE_WINDOW))
- resource_list_destroy_entry(entry);
- }
- return status;
-}
-
-/*
- * Lookup the bus range for the domain in MCFG, and set up config space
- * mapping.
- */
-static struct pci_config_window *
-pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
-{
- struct device *dev = &root->device->dev;
- struct resource *bus_res = &root->secondary;
- u16 seg = root->segment;
- const struct pci_ecam_ops *ecam_ops;
- struct resource cfgres;
- struct acpi_device *adev;
- struct pci_config_window *cfg;
- int ret;
-
- ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
- if (ret) {
- dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
- return NULL;
- }
-
- adev = acpi_resource_consumer(&cfgres);
- if (adev)
- dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
- dev_name(&adev->dev));
- else
- dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
- &cfgres);
-
- cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
- if (IS_ERR(cfg)) {
- dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
- PTR_ERR(cfg));
- return NULL;
- }
-
- return cfg;
-}
-
-/* release_info: free resources allocated by init_info */
-static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
-{
- struct acpi_pci_generic_root_info *ri;
-
- ri = container_of(ci, struct acpi_pci_generic_root_info, common);
- pci_ecam_free(ri->cfg);
- kfree(ci->ops);
- kfree(ri);
-}
-
-/* Interface called from ACPI code to setup PCI host controller */
-struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
-{
- struct acpi_pci_generic_root_info *ri;
- struct pci_bus *bus, *child;
- struct acpi_pci_root_ops *root_ops;
- struct pci_host_bridge *host;
-
- ri = kzalloc(sizeof(*ri), GFP_KERNEL);
- if (!ri)
- return NULL;
-
- root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
- if (!root_ops) {
- kfree(ri);
- return NULL;
- }
-
- ri->cfg = pci_acpi_setup_ecam_mapping(root);
- if (!ri->cfg) {
- kfree(ri);
- kfree(root_ops);
- return NULL;
- }
-
- root_ops->release_info = pci_acpi_generic_release_info;
- root_ops->prepare_resources = pci_acpi_root_prepare_resources;
- root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
- bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
- if (!bus)
- return NULL;
-
- /* If we must preserve the resource configuration, claim now */
- host = pci_find_host_bridge(bus);
- if (host->preserve_config)
- pci_bus_claim_resources(bus);
-
- /*
- * Assign whatever was left unassigned. If we didn't claim above,
- * this will reassign everything.
- */
- pci_assign_unassigned_root_bus_resources(bus);
-
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
-
- return bus;
-}
-
-void pcibios_add_bus(struct pci_bus *bus)
-{
- acpi_pci_add_bus(bus);
-}
-
-void pcibios_remove_bus(struct pci_bus *bus)
-{
- acpi_pci_remove_bus(bus);
-}
-
-#endif
@@ -15,6 +15,7 @@
#include <linux/pci_hotplug.h>
#include <linux/module.h>
#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
#include <linux/pm_runtime.h>
#include <linux/pm_qos.h>
#include <linux/rwsem.h>
@@ -1519,3 +1520,184 @@ static int __init acpi_pci_init(void)
return 0;
}
arch_initcall(acpi_pci_init);
+
+#if defined(CONFIG_ARM64)
+
+/*
+ * Try to assign the IRQ number when probing a new device
+ */
+int pcibios_alloc_irq(struct pci_dev *dev)
+{
+ if (!acpi_disabled)
+ acpi_pci_irq_enable(dev);
+
+ return 0;
+}
+
+struct acpi_pci_generic_root_info {
+ struct acpi_pci_root_info common;
+ struct pci_config_window *cfg; /* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+
+ return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_config_window *cfg;
+ struct acpi_device *adev;
+ struct device *bus_dev;
+
+ if (acpi_disabled)
+ return 0;
+
+ cfg = bridge->bus->sysdata;
+
+ /*
+ * On Hyper-V there is no corresponding ACPI device for a root bridge,
+ * therefore ->parent is set as NULL by the driver. And set 'adev' as
+ * NULL in this case because there is no proper ACPI device.
+ */
+ if (!cfg->parent)
+ adev = NULL;
+ else
+ adev = to_acpi_device(cfg->parent);
+
+ bus_dev = &bridge->bus->dev;
+
+ ACPI_COMPANION_SET(&bridge->dev, adev);
+ set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
+
+ return 0;
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+ struct resource_entry *entry, *tmp;
+ int status;
+
+ status = acpi_pci_probe_root_resources(ci);
+ resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+ if (!(entry->res->flags & IORESOURCE_WINDOW))
+ resource_list_destroy_entry(entry);
+ }
+ return status;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+ struct device *dev = &root->device->dev;
+ struct resource *bus_res = &root->secondary;
+ u16 seg = root->segment;
+ const struct pci_ecam_ops *ecam_ops;
+ struct resource cfgres;
+ struct acpi_device *adev;
+ struct pci_config_window *cfg;
+ int ret;
+
+ ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+ if (ret) {
+ dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
+ return NULL;
+ }
+
+ adev = acpi_resource_consumer(&cfgres);
+ if (adev)
+ dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
+ dev_name(&adev->dev));
+ else
+ dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
+ &cfgres);
+
+ cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
+ if (IS_ERR(cfg)) {
+ dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
+ PTR_ERR(cfg));
+ return NULL;
+ }
+
+ return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+ struct acpi_pci_generic_root_info *ri;
+
+ ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+ pci_ecam_free(ri->cfg);
+ kfree(ci->ops);
+ kfree(ri);
+}
+
+/* Interface called from ACPI code to setup PCI host controller */
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+ struct acpi_pci_generic_root_info *ri;
+ struct pci_bus *bus, *child;
+ struct acpi_pci_root_ops *root_ops;
+ struct pci_host_bridge *host;
+
+ ri = kzalloc(sizeof(*ri), GFP_KERNEL);
+ if (!ri)
+ return NULL;
+
+ root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
+ if (!root_ops) {
+ kfree(ri);
+ return NULL;
+ }
+
+ ri->cfg = pci_acpi_setup_ecam_mapping(root);
+ if (!ri->cfg) {
+ kfree(ri);
+ kfree(root_ops);
+ return NULL;
+ }
+
+ root_ops->release_info = pci_acpi_generic_release_info;
+ root_ops->prepare_resources = pci_acpi_root_prepare_resources;
+ root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
+ bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
+ if (!bus)
+ return NULL;
+
+ /* If we must preserve the resource configuration, claim now */
+ host = pci_find_host_bridge(bus);
+ if (host->preserve_config)
+ pci_bus_claim_resources(bus);
+
+ /*
+ * Assign whatever was left unassigned. If we didn't claim above,
+ * this will reassign everything.
+ */
+ pci_assign_unassigned_root_bus_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ return bus;
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ acpi_pci_remove_bus(bus);
+}
+
+#endif