@@ -131,6 +131,32 @@ static int print_extlog_rcd(const char *pfx,
return 1;
}
+static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
+ int severity)
+{
+ struct aer_capability_regs *aer;
+ struct pci_dev *pdev;
+ unsigned int devfn;
+ unsigned int bus;
+ int aer_severity;
+ int domain;
+
+ if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
+ pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
+ aer_severity = cper_severity_to_aer(severity);
+ aer = (struct aer_capability_regs *)pcie_err->aer_info;
+ domain = pcie_err->device_id.segment;
+ bus = pcie_err->device_id.bus;
+ devfn = PCI_DEVFN(pcie_err->device_id.device,
+ pcie_err->device_id.function);
+ pdev = pci_get_domain_bus_and_slot(domain, bus, devfn);
+ if (!pdev)
+ return;
+ pci_print_aer(pdev, aer_severity, aer);
+ pci_dev_put(pdev);
+ }
+}
+
static int extlog_print(struct notifier_block *nb, unsigned long val,
void *data)
{
@@ -179,6 +205,10 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
if (gdata->error_data_length >= sizeof(*mem))
trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
(u8)gdata->error_severity);
+ } else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
+ struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
+
+ extlog_print_pcie(pcie_err, gdata->error_severity);
} else {
void *err = acpi_hest_get_payload(gdata);
@@ -801,7 +801,7 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
trace_aer_event(dev_name(&dev->dev), (status & ~mask),
aer_severity, tlp_header_valid, &aer->header_log);
}
-EXPORT_SYMBOL_NS_GPL(pci_print_aer, CXL);
+EXPORT_SYMBOL_GPL(pci_print_aer);
/**
* add_error_device - list device to be handled
@@ -42,17 +42,26 @@ int pcie_read_tlp_log(struct pci_dev *dev, int where, struct pcie_tlp_log *log);
#if defined(CONFIG_PCIEAER)
int pci_aer_clear_nonfatal_status(struct pci_dev *dev);
int pcie_aer_is_native(struct pci_dev *dev);
+void pci_print_aer(struct pci_dev *dev, int aer_severity,
+ struct aer_capability_regs *aer);
#else
static inline int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
{
return -EINVAL;
}
+
static inline int pcie_aer_is_native(struct pci_dev *dev) { return 0; }
+static inline void pci_print_aer(struct pci_dev *dev, int aer_severity,
+ struct aer_capability_regs *aer)
+{ }
#endif
-void pci_print_aer(struct pci_dev *dev, int aer_severity,
- struct aer_capability_regs *aer);
+#if defined(CONFIG_ACPI_APEI_PCIEAER)
int cper_severity_to_aer(int cper_severity);
+#else
+static inline int cper_severity_to_aer(int cper_severity) { return 0; }
+#endif
+
void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
int severity, struct aer_capability_regs *aer_regs);
#endif //_AER_H_
Currently, extlog_print() (ELOG) only reports CPER PCIe section (UEFI v2.10, Appendix N.2.7) to the kernel log via print_extlog_rcd(). Instead, the similar ghes_do_proc() (GHES) prints to kernel log and calls pci_print_aer() to report via the ftrace infrastructure. Add support to report the CPER PCIe Error section also via the ftrace infrastructure by calling pci_print_aer() to make ELOG act consistently with GHES. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com> --- drivers/acpi/acpi_extlog.c | 30 ++++++++++++++++++++++++++++++ drivers/pci/pcie/aer.c | 2 +- include/linux/aer.h | 13 +++++++++++-- 3 files changed, 42 insertions(+), 3 deletions(-)