diff mbox series

[04/47] arm64: dts: qcom: qcs9100: Add QCS9100 RIDE board dts

Message ID 20240703025850.2172008-5-quic_tengfan@quicinc.com (mailing list archive)
State Handled Elsewhere
Delegated to: Krzysztof WilczyƄski
Headers show
Series arm64: qcom: dts: add QCS9100 support | expand

Commit Message

Tengfei Fan July 3, 2024, 2:58 a.m. UTC
Add support for the QCS9100 RIDE board dts. The current QCS9100 RIDE
board dts is directly renamed from the SA8775p RIDE board dts.
The difference between the current QCS9100 RIDE board and the SA8775p
RIDE board lies solely in the replacement of the SA8775p SoC with the
QCS9100 SoC, all other board resources remain the same.
The following items have been updated:
  - use QCS9100-related compatible names for this board dts.
  - replace the inclusion of sa8775p.dtsi with qcs9100.dtsi.
  - replace the inclusion of sa8775p-pmics.dtsi with qcs9100-pmics.dtsi

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile                         | 2 +-
 .../boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts}  | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
 rename arch/arm64/boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts} (99%)

Comments

Krzysztof Kozlowski July 3, 2024, 4:39 a.m. UTC | #1
On 03/07/2024 04:58, Tengfei Fan wrote:
> Add support for the QCS9100 RIDE board dts. The current QCS9100 RIDE
> board dts is directly renamed from the SA8775p RIDE board dts.
> The difference between the current QCS9100 RIDE board and the SA8775p
> RIDE board lies solely in the replacement of the SA8775p SoC with the
> QCS9100 SoC, all other board resources remain the same.
> The following items have been updated:
>   - use QCS9100-related compatible names for this board dts.
>   - replace the inclusion of sa8775p.dtsi with qcs9100.dtsi.
>   - replace the inclusion of sa8775p-pmics.dtsi with qcs9100-pmics.dtsi
> 
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                         | 2 +-
>  .../boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts}  | 8 ++++----
>  2 files changed, 5 insertions(+), 5 deletions(-)
>  rename arch/arm64/boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts} (99%)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5576c7d6ea06..a7a3792b0691 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
> @@ -112,7 +113,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
> -dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> similarity index 99%
> rename from arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> rename to arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> index 26ad05bd3b3f..2415d34b8aa5 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
> @@ -8,12 +8,12 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
> -#include "sa8775p.dtsi"
> -#include "sa8775p-pmics.dtsi"
> +#include "qcs9100.dtsi"
> +#include "qcs9100-pmics.dtsi"
>  
>  / {
> -	model = "Qualcomm SA8775P Ride";
> -	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
> +	model = "Qualcomm QCS9100 Ride";
> +	compatible = "qcom,qcs9100-ride", "qcom,qcs9100";

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Your own internal guideline tells you to perform above tests, doesn't it?

Best regards,
Krzysztof
Tengfei Fan July 3, 2024, 9:24 a.m. UTC | #2
On 7/3/2024 12:39 PM, Krzysztof Kozlowski wrote:
> On 03/07/2024 04:58, Tengfei Fan wrote:
>> Add support for the QCS9100 RIDE board dts. The current QCS9100 RIDE
>> board dts is directly renamed from the SA8775p RIDE board dts.
>> The difference between the current QCS9100 RIDE board and the SA8775p
>> RIDE board lies solely in the replacement of the SA8775p SoC with the
>> QCS9100 SoC, all other board resources remain the same.
>> The following items have been updated:
>>    - use QCS9100-related compatible names for this board dts.
>>    - replace the inclusion of sa8775p.dtsi with qcs9100.dtsi.
>>    - replace the inclusion of sa8775p-pmics.dtsi with qcs9100-pmics.dtsi
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile                         | 2 +-
>>   .../boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts}  | 8 ++++----
>>   2 files changed, 5 insertions(+), 5 deletions(-)
>>   rename arch/arm64/boot/dts/qcom/{sa8775p-ride.dts => qcs9100-ride.dts} (99%)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 5576c7d6ea06..a7a3792b0691 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
>> @@ -112,7 +113,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
>> -dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
>> similarity index 99%
>> rename from arch/arm64/boot/dts/qcom/sa8775p-ride.dts
>> rename to arch/arm64/boot/dts/qcom/qcs9100-ride.dts
>> index 26ad05bd3b3f..2415d34b8aa5 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
>> @@ -8,12 +8,12 @@
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>   
>> -#include "sa8775p.dtsi"
>> -#include "sa8775p-pmics.dtsi"
>> +#include "qcs9100.dtsi"
>> +#include "qcs9100-pmics.dtsi"
>>   
>>   / {
>> -	model = "Qualcomm SA8775P Ride";
>> -	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
>> +	model = "Qualcomm QCS9100 Ride";
>> +	compatible = "qcom,qcs9100-ride", "qcom,qcs9100";
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
> 
> Your own internal guideline tells you to perform above tests, doesn't it?
> 
> Best regards,
> Krzysztof
> 

I have performed relevant check, and it's possible that there are some 
issues about the parameters used. I will follow your advice and refer to 
the relevant documentation to perform DTBS check again, ensuring that 
similar issues do not arise in the future.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5576c7d6ea06..a7a3792b0691 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -103,6 +103,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
@@ -112,7 +113,6 @@  dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
similarity index 99%
rename from arch/arm64/boot/dts/qcom/sa8775p-ride.dts
rename to arch/arm64/boot/dts/qcom/qcs9100-ride.dts
index 26ad05bd3b3f..2415d34b8aa5 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -8,12 +8,12 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
+#include "qcs9100.dtsi"
+#include "qcs9100-pmics.dtsi"
 
 / {
-	model = "Qualcomm SA8775P Ride";
-	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
+	model = "Qualcomm QCS9100 Ride";
+	compatible = "qcom,qcs9100-ride", "qcom,qcs9100";
 
 	aliases {
 		ethernet0 = &ethernet0;