diff mbox series

[14/14] arm64: dts: qcom: sm8450: Add 'global' interrupt to the PCIe RC node

Message ID 20240715-pci-qcom-hotplug-v1-14-5f3765cc873a@linaro.org (mailing list archive)
State Superseded
Headers show
Series PCI: qcom: Simulate PCIe hotplug using 'global' interrupt | expand

Commit Message

Manivannan Sadhasivam via B4 Relay July 15, 2024, 5:33 p.m. UTC
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...

Hence, add it to the PCIe RC node along with the existing MSI interrupts.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9bafb3b350ff..90d16cb83669 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1780,7 +1780,8 @@  pcie0: pcie@1c00000 {
 			msi-map = <0x0 &gic_its 0x5980 0x1>,
 				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
@@ -1788,7 +1789,8 @@  pcie0: pcie@1c00000 {
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0",
+			interrupt-names = "global",
+					  "msi0",
 					  "msi1",
 					  "msi2",
 					  "msi3",
@@ -1942,7 +1944,8 @@  pcie1: pcie@1c08000 {
 			msi-map = <0x0 &gic_its 0x5a00 0x1>,
 				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
@@ -1950,7 +1953,8 @@  pcie1: pcie@1c08000 {
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0",
+			interrupt-names = "global",
+					  "msi0",
 					  "msi1",
 					  "msi2",
 					  "msi3",