diff mbox series

[2/2] PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()

Message ID 20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org (mailing list archive)
State New
Delegated to: Bjorn Helgaas
Headers show
Series PCI: {qcom-ep/tegra194}: Move endpoint cleanups to PERST# deassert handler | expand

Commit Message

Manivannan Sadhasivam via B4 Relay Aug. 17, 2024, 5:39 a.m. UTC
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.

All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.

One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.

So let's fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4bf7b433417a..d68dd18ed43c 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1709,9 +1709,6 @@  static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
 	if (ret)
 		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
 
-	pci_epc_deinit_notify(pcie->pci.ep.epc);
-	dw_pcie_ep_cleanup(&pcie->pci.ep);
-
 	reset_control_assert(pcie->core_rst);
 
 	tegra_pcie_disable_phy(pcie);
@@ -1790,6 +1787,10 @@  static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 		goto fail_phy;
 	}
 
+	/* Perform cleanup that requires refclk */
+	pci_epc_deinit_notify(pcie->pci.ep.epc);
+	dw_pcie_ep_cleanup(&pcie->pci.ep);
+
 	/* Clear any stale interrupt statuses */
 	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L0);
 	appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_0_0);