@@ -1095,33 +1095,6 @@ static void pci_enable_acs(struct pci_dev *dev)
pci_write_config_word(dev, pos + PCI_ACS_CTRL, caps.ctrl);
}
-/**
- * pcie_read_tlp_log - read TLP Header Log
- * @dev: PCIe device
- * @where: PCI Config offset of TLP Header Log
- * @tlp_log: TLP Log structure to fill
- *
- * Fill @tlp_log from TLP Header Log registers, e.g., AER or DPC.
- *
- * Return: 0 on success and filled TLP Log structure, <0 on error.
- */
-int pcie_read_tlp_log(struct pci_dev *dev, int where,
- struct pcie_tlp_log *tlp_log)
-{
- int i, ret;
-
- memset(tlp_log, 0, sizeof(*tlp_log));
-
- for (i = 0; i < 4; i++) {
- ret = pci_read_config_dword(dev, where + i * 4,
- &tlp_log->dw[i]);
- if (ret)
- return pcibios_err_to_errno(ret);
- }
-
- return 0;
-}
-
/**
* pci_restore_bars - restore a device's BAR values (e.g. after wake-up)
* @dev: PCI device to have its BARs restored
@@ -482,9 +482,9 @@ struct aer_err_info {
int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info);
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
-#endif /* CONFIG_PCIEAER */
int pcie_read_tlp_log(struct pci_dev *dev, int where, struct pcie_tlp_log *log);
+#endif /* CONFIG_PCIEAER */
#ifdef CONFIG_PCIEPORTBUS
/* Cached RCEC Endpoint Association */
@@ -7,7 +7,7 @@ pcieportdrv-y := portdrv.o rcec.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
obj-y += aspm.o
-obj-$(CONFIG_PCIEAER) += aer.o err.o
+obj-$(CONFIG_PCIEAER) += aer.o err.o tlp.o
obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
obj-$(CONFIG_PCIE_DPC) += dpc.o
new file mode 100644
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe TLP Log handling
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+
+#include <linux/aer.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include "../pci.h"
+
+/**
+ * pcie_read_tlp_log - read TLP Header Log
+ * @dev: PCIe device
+ * @where: PCI Config offset of TLP Header Log
+ * @tlp_log: TLP Log structure to fill
+ *
+ * Fill @tlp_log from TLP Header Log registers, e.g., AER or DPC.
+ *
+ * Return: 0 on success and filled TLP Log structure, <0 on error.
+ */
+int pcie_read_tlp_log(struct pci_dev *dev, int where,
+ struct pcie_tlp_log *tlp_log)
+{
+ int i, ret;
+
+ memset(tlp_log, 0, sizeof(*tlp_log));
+
+ for (i = 0; i < 4; i++) {
+ ret = pci_read_config_dword(dev, where + i * 4,
+ &tlp_log->dw[i]);
+ if (ret)
+ return pcibios_err_to_errno(ret);
+ }
+
+ return 0;
+}
TLP Log is PCIe feature and is processed only by AER and DPC. Configwise, DPC depends AER being enabled. In lack of better place, the TLP Log handling code was initially placed into pci.c but it can be easily placed in a separate file. Move TLP Log handling code to own file under pcie/ subdirectory and include it only when AER is enabled. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/pci/pci.c | 27 --------------------------- drivers/pci/pci.h | 2 +- drivers/pci/pcie/Makefile | 2 +- drivers/pci/pcie/tlp.c | 39 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 41 insertions(+), 29 deletions(-) create mode 100644 drivers/pci/pcie/tlp.c