diff mbox series

[1/4] PCI: cpqphp: Fix PCIBIOS_* return value confusions

Message ID 20241017143131.46163-2-ilpo.jarvinen@linux.intel.com (mailing list archive)
State New
Headers show
Series PCI: cpqphp: Fix and cleanups | expand

Commit Message

Ilpo Järvinen Oct. 17, 2024, 2:31 p.m. UTC 
Code in and related to PCI_RefinedAccessConfig() has 3 types of return
type confusion:
 - PCI_RefinedAccessConfig() tests pci_bus_read_config_dword() return
   value against -1.
 - PCI_RefinedAccessConfig() returns both -1 and PCIBIOS_* return codes.
 - Callers of PCI_RefinedAccessConfig() only test for -1.

Make PCI_RefinedAccessConfig() return PCIBIOS_* codes consistently and
adapt callers accordingly.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/pci/hotplug/cpqphp_pci.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 718bc6cf12cb..974c7db3265b 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -135,11 +135,13 @@  int cpqhp_unconfigure_device(struct pci_func *func)
 static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 offset, u32 *value)
 {
 	u32 vendID = 0;
+	int ret;
 
-	if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
-		return -1;
+	ret = pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
 	if (PCI_POSSIBLE_ERROR(vendID))
-		return -1;
+		return PCIBIOS_DEVICE_NOT_FOUND;
 	return pci_bus_read_config_dword(bus, devfn, offset, value);
 }
 
@@ -202,13 +204,15 @@  static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 *dev_
 {
 	u16 tdevice;
 	u32 work;
+	int ret;
 	u8 tbus;
 
 	ctrl->pci_bus->number = bus_num;
 
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
 		/* Scan for access first */
-		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+		ret = PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work);
+		if (ret)
 			continue;
 		dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
 		/* Yep we got one. Not a bridge ? */
@@ -220,7 +224,8 @@  static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 *dev_
 	}
 	for (tdevice = 0; tdevice < 0xFF; tdevice++) {
 		/* Scan for access first */
-		if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+		ret = PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work);
+		if (ret)
 			continue;
 		dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
 		/* Yep we got one. bridge ? */