| Message ID | 20241024065328.521518-11-wei.fang@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | add basic support for i.MX95 NETC | expand |
On Thu, Oct 24, 2024 at 02:53:25PM +0800, Wei Fang wrote: > From: Clark Wang <xiaoning.wang@nxp.com> > > Extract enetc_int_vector_init() and enetc_int_vector_destroy() from > enetc_alloc_msix() so that the code is more concise and readable. In > addition, slightly different from before, the cleanup helper function > is used to manage dynamically allocated memory resources. > > Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> > Signed-off-by: Wei Fang <wei.fang@nxp.com> > Reviewed-by: Frank Li <Frank.Li@nxp.com> > Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> > --- > v5: no changes > --- > drivers/net/ethernet/freescale/enetc/enetc.c | 172 ++++++++++--------- > 1 file changed, 87 insertions(+), 85 deletions(-) > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c > index 032d8eadd003..bd725561b8a2 100644 > --- a/drivers/net/ethernet/freescale/enetc/enetc.c > +++ b/drivers/net/ethernet/freescale/enetc/enetc.c > @@ -2965,6 +2965,87 @@ int enetc_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) > } > EXPORT_SYMBOL_GPL(enetc_ioctl); > > +static int enetc_int_vector_init(struct enetc_ndev_priv *priv, int i, > + int v_tx_rings) > +{ > + struct enetc_int_vector *v __free(kfree); Please limit yourself to refactoring the code as-is into a separate function. This function does not benefit in any way from the use of __free() and no_free_ptr(). The established norm is that the normal teardown path should be identical to the error unwind path, minus the last step. Combining normal function calls with devres/scope-based cleanup/whatever other "look, you don't get to care about error handling!!!" APIs there may be makes that much more difficult to reason about. If the function is really simple and you really don't get to care about error handling by using __free(), then maybe its usage is tolerable, but that is hardly the general case. The more intricate the error handling becomes, the less useful __free() is, and the more it starts getting in the way of a human correctness reviewer. FWIW, Documentation/process/maintainer-netdev.rst, section "Using device-managed and cleanup.h constructs", appears to mostly state the same position as me here. Obviously, here, the established cleanup norm isn't followed anyway, but a patch which brings it in line would be appreciated. I think that a multi-patch approach, where the code is first moved and just moved, and then successively transformed in obviously correct and easy to review steps, would be best. Since you're quite close currently to the 15-patch limit, I would try to create a patch set just for preparing the enetc drivers, and introduce the i.mx95 support in a separate set which has mostly "+" lines in its diff. That way, there is also some time to not rush the ongoing IERB/PRB dt-binding discussion, while you can progress on pure driver refactoring. > + struct enetc_bdr *bdr; > + int j, err; > + > + v = kzalloc(struct_size(v, tx_ring, v_tx_rings), GFP_KERNEL); > + if (!v) > + return -ENOMEM; > + > + bdr = &v->rx_ring; > + bdr->index = i; > + bdr->ndev = priv->ndev; > + bdr->dev = priv->dev; > + bdr->bd_count = priv->rx_bd_count; > + bdr->buffer_offset = ENETC_RXB_PAD; > + priv->rx_ring[i] = bdr; > + > + err = xdp_rxq_info_reg(&bdr->xdp.rxq, priv->ndev, i, 0); > + if (err) > + return err; > + > + err = xdp_rxq_info_reg_mem_model(&bdr->xdp.rxq, > + MEM_TYPE_PAGE_SHARED, NULL); MEM_TYPE_PAGE_SHARED fits on the previous line. > + if (err) { > + xdp_rxq_info_unreg(&bdr->xdp.rxq); > + return err; > + } > + > + /* init defaults for adaptive IC */ > + if (priv->ic_mode & ENETC_IC_RX_ADAPTIVE) { > + v->rx_ictt = 0x1; > + v->rx_dim_en = true; > + } > + > + INIT_WORK(&v->rx_dim.work, enetc_rx_dim_work); > + netif_napi_add(priv->ndev, &v->napi, enetc_poll); > + v->count_tx_rings = v_tx_rings; > + > + for (j = 0; j < v_tx_rings; j++) { > + int idx; > + > + /* default tx ring mapping policy */ > + idx = priv->bdr_int_num * j + i; > + __set_bit(idx, &v->tx_rings_map); > + bdr = &v->tx_ring[j]; > + bdr->index = idx; > + bdr->ndev = priv->ndev; > + bdr->dev = priv->dev; > + bdr->bd_count = priv->tx_bd_count; > + priv->tx_ring[idx] = bdr; > + } > + > + priv->int_vector[i] = no_free_ptr(v); > + > + return 0; > +}
> On Thu, Oct 24, 2024 at 02:53:25PM +0800, Wei Fang wrote: > > From: Clark Wang <xiaoning.wang@nxp.com> > > > > Extract enetc_int_vector_init() and enetc_int_vector_destroy() from > > enetc_alloc_msix() so that the code is more concise and readable. In > > addition, slightly different from before, the cleanup helper function > > is used to manage dynamically allocated memory resources. > > > > Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> > > Signed-off-by: Wei Fang <wei.fang@nxp.com> > > Reviewed-by: Frank Li <Frank.Li@nxp.com> > > Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> > > --- > > v5: no changes > > --- > > drivers/net/ethernet/freescale/enetc/enetc.c | 172 ++++++++++--------- > > 1 file changed, 87 insertions(+), 85 deletions(-) > > > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c > b/drivers/net/ethernet/freescale/enetc/enetc.c > > index 032d8eadd003..bd725561b8a2 100644 > > --- a/drivers/net/ethernet/freescale/enetc/enetc.c > > +++ b/drivers/net/ethernet/freescale/enetc/enetc.c > > @@ -2965,6 +2965,87 @@ int enetc_ioctl(struct net_device *ndev, struct > ifreq *rq, int cmd) > > } > > EXPORT_SYMBOL_GPL(enetc_ioctl); > > > > +static int enetc_int_vector_init(struct enetc_ndev_priv *priv, int i, > > + int v_tx_rings) > > +{ > > + struct enetc_int_vector *v __free(kfree); > > Please limit yourself to refactoring the code as-is into a separate function. Okay > This function does not benefit in any way from the use of __free() and > no_free_ptr(). The established norm is that the normal teardown path > should be identical to the error unwind path, minus the last step. > Combining normal function calls with devres/scope-based cleanup/whatever > other "look, you don't get to care about error handling!!!" APIs there may be > makes that much more difficult to reason about. If the function is really > simple and you really don't get to care about error handling by using __free(), > then maybe its usage is tolerable, but that is hardly the general case. > The more intricate the error handling becomes, the less useful __free() is, > and the more it starts getting in the way of a human correctness reviewer. > > FWIW, Documentation/process/maintainer-netdev.rst, section "Using > device-managed and cleanup.h constructs", appears to mostly state the > same position as me here. > > Obviously, here, the established cleanup norm isn't followed anyway, but > a patch which brings it in line would be appreciated. I think that a > multi-patch approach, where the code is first moved and just moved, and > then successively transformed in obviously correct and easy to review > steps, would be best. > > Since you're quite close currently to the 15-patch limit, I would try to > create a patch set just for preparing the enetc drivers, and introduce > the i.mx95 support in a separate set which has mostly "+" lines in its diff. > That way, there is also some time to not rush the ongoing IERB/PRB > dt-binding discussion, while you can progress on pure driver refactoring. > Thanks for your suggestion.
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 032d8eadd003..bd725561b8a2 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -2965,6 +2965,87 @@ int enetc_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) } EXPORT_SYMBOL_GPL(enetc_ioctl); +static int enetc_int_vector_init(struct enetc_ndev_priv *priv, int i, + int v_tx_rings) +{ + struct enetc_int_vector *v __free(kfree); + struct enetc_bdr *bdr; + int j, err; + + v = kzalloc(struct_size(v, tx_ring, v_tx_rings), GFP_KERNEL); + if (!v) + return -ENOMEM; + + bdr = &v->rx_ring; + bdr->index = i; + bdr->ndev = priv->ndev; + bdr->dev = priv->dev; + bdr->bd_count = priv->rx_bd_count; + bdr->buffer_offset = ENETC_RXB_PAD; + priv->rx_ring[i] = bdr; + + err = xdp_rxq_info_reg(&bdr->xdp.rxq, priv->ndev, i, 0); + if (err) + return err; + + err = xdp_rxq_info_reg_mem_model(&bdr->xdp.rxq, + MEM_TYPE_PAGE_SHARED, NULL); + if (err) { + xdp_rxq_info_unreg(&bdr->xdp.rxq); + return err; + } + + /* init defaults for adaptive IC */ + if (priv->ic_mode & ENETC_IC_RX_ADAPTIVE) { + v->rx_ictt = 0x1; + v->rx_dim_en = true; + } + + INIT_WORK(&v->rx_dim.work, enetc_rx_dim_work); + netif_napi_add(priv->ndev, &v->napi, enetc_poll); + v->count_tx_rings = v_tx_rings; + + for (j = 0; j < v_tx_rings; j++) { + int idx; + + /* default tx ring mapping policy */ + idx = priv->bdr_int_num * j + i; + __set_bit(idx, &v->tx_rings_map); + bdr = &v->tx_ring[j]; + bdr->index = idx; + bdr->ndev = priv->ndev; + bdr->dev = priv->dev; + bdr->bd_count = priv->tx_bd_count; + priv->tx_ring[idx] = bdr; + } + + priv->int_vector[i] = no_free_ptr(v); + + return 0; +} + +static void enetc_int_vector_destroy(struct enetc_ndev_priv *priv, int i) +{ + struct enetc_int_vector *v = priv->int_vector[i]; + struct enetc_bdr *rx_ring = &v->rx_ring; + int j, tx_ring_index; + + xdp_rxq_info_unreg_mem_model(&rx_ring->xdp.rxq); + xdp_rxq_info_unreg(&rx_ring->xdp.rxq); + netif_napi_del(&v->napi); + cancel_work_sync(&v->rx_dim.work); + + priv->rx_ring[i] = NULL; + + for (j = 0; j < v->count_tx_rings; j++) { + tx_ring_index = priv->bdr_int_num * j + i; + priv->tx_ring[tx_ring_index] = NULL; + } + + kfree(v); + priv->int_vector[i] = NULL; +} + int enetc_alloc_msix(struct enetc_ndev_priv *priv) { struct pci_dev *pdev = priv->si->pdev; @@ -2987,62 +3068,9 @@ int enetc_alloc_msix(struct enetc_ndev_priv *priv) v_tx_rings = priv->num_tx_rings / priv->bdr_int_num; for (i = 0; i < priv->bdr_int_num; i++) { - struct enetc_int_vector *v; - struct enetc_bdr *bdr; - int j; - - v = kzalloc(struct_size(v, tx_ring, v_tx_rings), GFP_KERNEL); - if (!v) { - err = -ENOMEM; - goto fail; - } - - priv->int_vector[i] = v; - - bdr = &v->rx_ring; - bdr->index = i; - bdr->ndev = priv->ndev; - bdr->dev = priv->dev; - bdr->bd_count = priv->rx_bd_count; - bdr->buffer_offset = ENETC_RXB_PAD; - priv->rx_ring[i] = bdr; - - err = xdp_rxq_info_reg(&bdr->xdp.rxq, priv->ndev, i, 0); - if (err) { - kfree(v); - goto fail; - } - - err = xdp_rxq_info_reg_mem_model(&bdr->xdp.rxq, - MEM_TYPE_PAGE_SHARED, NULL); - if (err) { - xdp_rxq_info_unreg(&bdr->xdp.rxq); - kfree(v); + err = enetc_int_vector_init(priv, i, v_tx_rings); + if (err) goto fail; - } - - /* init defaults for adaptive IC */ - if (priv->ic_mode & ENETC_IC_RX_ADAPTIVE) { - v->rx_ictt = 0x1; - v->rx_dim_en = true; - } - INIT_WORK(&v->rx_dim.work, enetc_rx_dim_work); - netif_napi_add(priv->ndev, &v->napi, enetc_poll); - v->count_tx_rings = v_tx_rings; - - for (j = 0; j < v_tx_rings; j++) { - int idx; - - /* default tx ring mapping policy */ - idx = priv->bdr_int_num * j + i; - __set_bit(idx, &v->tx_rings_map); - bdr = &v->tx_ring[j]; - bdr->index = idx; - bdr->ndev = priv->ndev; - bdr->dev = priv->dev; - bdr->bd_count = priv->tx_bd_count; - priv->tx_ring[idx] = bdr; - } } num_stack_tx_queues = enetc_num_stack_tx_queues(priv); @@ -3062,16 +3090,8 @@ int enetc_alloc_msix(struct enetc_ndev_priv *priv) return 0; fail: - while (i--) { - struct enetc_int_vector *v = priv->int_vector[i]; - struct enetc_bdr *rx_ring = &v->rx_ring; - - xdp_rxq_info_unreg_mem_model(&rx_ring->xdp.rxq); - xdp_rxq_info_unreg(&rx_ring->xdp.rxq); - netif_napi_del(&v->napi); - cancel_work_sync(&v->rx_dim.work); - kfree(v); - } + while (i--) + enetc_int_vector_destroy(priv, i); pci_free_irq_vectors(pdev); @@ -3083,26 +3103,8 @@ void enetc_free_msix(struct enetc_ndev_priv *priv) { int i; - for (i = 0; i < priv->bdr_int_num; i++) { - struct enetc_int_vector *v = priv->int_vector[i]; - struct enetc_bdr *rx_ring = &v->rx_ring; - - xdp_rxq_info_unreg_mem_model(&rx_ring->xdp.rxq); - xdp_rxq_info_unreg(&rx_ring->xdp.rxq); - netif_napi_del(&v->napi); - cancel_work_sync(&v->rx_dim.work); - } - - for (i = 0; i < priv->num_rx_rings; i++) - priv->rx_ring[i] = NULL; - - for (i = 0; i < priv->num_tx_rings; i++) - priv->tx_ring[i] = NULL; - - for (i = 0; i < priv->bdr_int_num; i++) { - kfree(priv->int_vector[i]); - priv->int_vector[i] = NULL; - } + for (i = 0; i < priv->bdr_int_num; i++) + enetc_int_vector_destroy(priv, i); /* disable all MSIX for this device */ pci_free_irq_vectors(priv->si->pdev);