@@ -42,6 +42,8 @@
#define COMMAND_READ BIT(3)
#define COMMAND_WRITE BIT(4)
#define COMMAND_COPY BIT(5)
+#define COMMAND_ENABLE_DOORBELL BIT(6)
+#define COMMAND_DISABLE_DOORBELL BIT(7)
#define PCI_ENDPOINT_TEST_STATUS 0x8
#define STATUS_READ_SUCCESS BIT(0)
@@ -53,6 +55,11 @@
#define STATUS_IRQ_RAISED BIT(6)
#define STATUS_SRC_ADDR_INVALID BIT(7)
#define STATUS_DST_ADDR_INVALID BIT(8)
+#define STATUS_DOORBELL_SUCCESS BIT(9)
+#define STATUS_DOORBELL_ENABLE_SUCCESS BIT(10)
+#define STATUS_DOORBELL_ENABLE_FAIL BIT(11)
+#define STATUS_DOORBELL_DISABLE_SUCCESS BIT(12)
+#define STATUS_DOORBELL_DISABLE_FAIL BIT(13)
#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c
#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
@@ -67,7 +74,12 @@
#define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28
#define PCI_ENDPOINT_TEST_FLAGS 0x2c
+#define PCI_ENDPOINT_TEST_DB_BAR 0x30
+#define PCI_ENDPOINT_TEST_DB_ADDR 0x34
+#define PCI_ENDPOINT_TEST_DB_DATA 0x38
+
#define FLAG_USE_DMA BIT(0)
+#define FLAG_SUPPORT_DOORBELL BIT(1)
#define PCI_DEVICE_ID_TI_AM654 0xb00c
#define PCI_DEVICE_ID_TI_J7200 0xb00f
@@ -75,6 +87,7 @@
#define PCI_DEVICE_ID_TI_J721S2 0xb013
#define PCI_DEVICE_ID_LS1088A 0x80c0
#define PCI_DEVICE_ID_IMX8 0x0808
+#define PCI_DEVICE_ID_IMX8_DB 0x080c
#define is_am654_pci_dev(pdev) \
((pdev)->device == PCI_DEVICE_ID_TI_AM654)
@@ -108,6 +121,7 @@ enum pci_barno {
BAR_3,
BAR_4,
BAR_5,
+ NO_BAR = -1,
};
struct pci_endpoint_test {
@@ -746,6 +760,52 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
return false;
}
+static bool pci_endpoint_test_doorbell(struct pci_endpoint_test *test)
+{
+ enum pci_barno bar;
+ u32 data, status;
+ u32 addr;
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ COMMAND_ENABLE_DOORBELL);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+ if (status & STATUS_DOORBELL_ENABLE_FAIL)
+ return false;
+
+ data = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_DATA);
+ addr = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_ADDR);
+ bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS, 0);
+
+ bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+ writel(data, test->bar[bar] + addr);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+ COMMAND_DISABLE_DOORBELL);
+
+ wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+ status |= pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+ if ((status & STATUS_DOORBELL_SUCCESS) &&
+ (status & STATUS_DOORBELL_DISABLE_SUCCESS))
+ return true;
+
+ return false;
+}
+
static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
@@ -793,6 +853,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
case PCITEST_CLEAR_IRQ:
ret = pci_endpoint_test_clear_irq(test);
break;
+ case PCITEST_DOORBELL:
+ ret = pci_endpoint_test_doorbell(test);
+ break;
}
ret:
@@ -21,6 +21,7 @@
#define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int)
#define PCITEST_GET_IRQTYPE _IO('P', 0x9)
#define PCITEST_CLEAR_IRQ _IO('P', 0x10)
+#define PCITEST_DOORBELL _IO('P', 0x11)
#define PCITEST_FLAGS_USE_DMA 0x00000001
Add three registers: PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and PCIE_ENDPOINT_TEST_DB_DATA. Trigger the doorbell by writing data from PCI_ENDPOINT_TEST_DB_DATA to the address provided by PCI_ENDPOINT_TEST_DB_ADDR and wait for endpoint feedback. Add two command to COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL to enable EP side's doorbell support and avoid compatible problem. Host side new driver Host side old driver EP: new driver S F EP: old driver F F S: If EP side support MSI, 'pcitest -B' return success. If EP side doesn't support MSI, the same to 'F'. F: 'pcitest -B' return failure, other case as usual. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- change from v3 to v4 - Add COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL. - Remove new DID requirement. --- drivers/misc/pci_endpoint_test.c | 63 ++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/pcitest.h | 1 + 2 files changed, 64 insertions(+)