diff mbox series

nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled

Message ID 2583975.4sIyE3leJj@kreacher (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled | expand

Commit Message

Rafael J. Wysocki Aug. 8, 2019, 8:36 a.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

One of the modifications made by commit d916b1be94b6 ("nvme-pci: use
host managed power state for suspend") was adding a pci_save_state()
call to nvme_suspend() in order to prevent the PCI bus-level PM from
being applied to the suspended NVMe devices, but if ASPM is not
enabled for the target NVMe device, that causes its PCIe link to stay
up and the platform may not be able to get into its optimum low-power
state because of that.

For example, if ASPM is disabled for the NVMe drive (PC401 NVMe SK
hynix 256GB) in my Dell XPS13 9380, leaving it in D0 during
suspend-to-idle prevents the SoC from reaching package idle states
deeper than PC3, which is way insufficient for system suspend.

To address this shortcoming, make nvme_suspend() check if ASPM is
enabled for the target device and fall back to full device shutdown
and PCI bus-level PM if that is not the case.

Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

This is an update of the following patch:

https://patchwork.kernel.org/patch/11081791/

going with the subject matching the changes in the patch.

This also addresses style-related comments from Christoph and follows the
Keith's advice to use pci_upstream_bridge() to get to the upstream bridge
of the device.

Thanks!

---
 drivers/nvme/host/pci.c |   15 +++++++++++----
 drivers/pci/pcie/aspm.c |   20 ++++++++++++++++++++
 include/linux/pci.h     |    2 ++
 3 files changed, 33 insertions(+), 4 deletions(-)

Comments

Christoph Hellwig Aug. 8, 2019, 8:48 a.m. UTC | #1
> -     ndev->last_ps = 0;
>       ret = nvme_get_power_state(ctrl, &ndev->last_ps);
> -     if (ret < 0)
> +     if (ret < 0 || ndev->last_ps == U32_MAX)

Is the intent of the magic U32_MAX check to see if the
nvme_get_power_state failed at the nvme level?  In that case just
checking for any non-zero return value from nvme_get_power_state might
be the easier and more clear way to do it.

> Index: linux-pm/drivers/pci/pcie/aspm.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pcie/aspm.c
> +++ linux-pm/drivers/pci/pcie/aspm.c

Shouldn't we split PCI vs nvme in two patches?

> @@ -1170,6 +1170,26 @@ static int pcie_aspm_get_policy(char *bu
>  module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
>  	NULL, 0644);
>  
> +/*
> + * pcie_aspm_enabled - Return the mask of enabled ASPM link states.
> + * @pci_device: Target device.
> + */
> +u32 pcie_aspm_enabled(struct pci_dev *pci_device)

pcie_aspm_enabled sounds like it returns a boolean.  Shouldn't there be
a mask or so in the name better documenting what it returns?

> +{
> +	struct pci_dev *bridge = pci_upstream_bridge(pci_device);
> +	u32 ret;
> +
> +	if (!bridge)
> +		return 0;
> +
> +	mutex_lock(&aspm_lock);
> +	ret = bridge->link_state ? bridge->link_state->aspm_enabled : 0;
> +	mutex_unlock(&aspm_lock);
> +
> +	return ret;
> +}

I think this will need a EXPORT_SYMBOL_GPL thrown in so that modular
nvme continues working.

> +
> +
>  #ifdef CONFIG_PCIEASPM_DEBUG

Nit: double blank line here.
Rafael J. Wysocki Aug. 8, 2019, 9:06 a.m. UTC | #2
On Thu, Aug 8, 2019 at 10:48 AM Christoph Hellwig <hch@lst.de> wrote:
>
> > -     ndev->last_ps = 0;
> >       ret = nvme_get_power_state(ctrl, &ndev->last_ps);
> > -     if (ret < 0)
> > +     if (ret < 0 || ndev->last_ps == U32_MAX)
>
> Is the intent of the magic U32_MAX check to see if the
> nvme_get_power_state failed at the nvme level?  In that case just
> checking for any non-zero return value from nvme_get_power_state might
> be the easier and more clear way to do it.

Now that I think of that, it appears redundant.  I'll drop it.

>
> > Index: linux-pm/drivers/pci/pcie/aspm.c
> > ===================================================================
> > --- linux-pm.orig/drivers/pci/pcie/aspm.c
> > +++ linux-pm/drivers/pci/pcie/aspm.c
>
> Shouldn't we split PCI vs nvme in two patches?

That can be done.

> > @@ -1170,6 +1170,26 @@ static int pcie_aspm_get_policy(char *bu
> >  module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
> >       NULL, 0644);
> >
> > +/*
> > + * pcie_aspm_enabled - Return the mask of enabled ASPM link states.
> > + * @pci_device: Target device.
> > + */
> > +u32 pcie_aspm_enabled(struct pci_dev *pci_device)
>
> pcie_aspm_enabled sounds like it returns a boolean.  Shouldn't there be
> a mask or so in the name better documenting what it returns?

OK

> > +{
> > +     struct pci_dev *bridge = pci_upstream_bridge(pci_device);
> > +     u32 ret;
> > +
> > +     if (!bridge)
> > +             return 0;
> > +
> > +     mutex_lock(&aspm_lock);
> > +     ret = bridge->link_state ? bridge->link_state->aspm_enabled : 0;
> > +     mutex_unlock(&aspm_lock);
> > +
> > +     return ret;
> > +}
>
> I think this will need a EXPORT_SYMBOL_GPL thrown in so that modular
> nvme continues working.

Right, sorry.

> > +
> > +
> >  #ifdef CONFIG_PCIEASPM_DEBUG
>
> Nit: double blank line here.

Overlooked, will fix.

Thanks!
diff mbox series

Patch

Index: linux-pm/drivers/nvme/host/pci.c
===================================================================
--- linux-pm.orig/drivers/nvme/host/pci.c
+++ linux-pm/drivers/nvme/host/pci.c
@@ -2846,7 +2846,7 @@  static int nvme_resume(struct device *de
 	struct nvme_dev *ndev = pci_get_drvdata(to_pci_dev(dev));
 	struct nvme_ctrl *ctrl = &ndev->ctrl;
 
-	if (pm_resume_via_firmware() || !ctrl->npss ||
+	if (ndev->last_ps == U32_MAX ||
 	    nvme_set_power_state(ctrl, ndev->last_ps) != 0)
 		nvme_reset_ctrl(ctrl);
 	return 0;
@@ -2859,6 +2859,8 @@  static int nvme_suspend(struct device *d
 	struct nvme_ctrl *ctrl = &ndev->ctrl;
 	int ret = -EBUSY;
 
+	ndev->last_ps = U32_MAX;
+
 	/*
 	 * The platform does not remove power for a kernel managed suspend so
 	 * use host managed nvme power settings for lowest idle power if
@@ -2866,8 +2868,14 @@  static int nvme_suspend(struct device *d
 	 * shutdown.  But if the firmware is involved after the suspend or the
 	 * device does not support any non-default power states, shut down the
 	 * device fully.
+	 *
+	 * If ASPM is not enabled for the device, shut down the device and allow
+	 * the PCI bus layer to put it into D3 in order to take the PCIe link
+	 * down, so as to allow the platform to achieve its minimum low-power
+	 * state (which may not be possible if the link is up).
 	 */
-	if (pm_suspend_via_firmware() || !ctrl->npss) {
+	if (pm_suspend_via_firmware() || !ctrl->npss ||
+	    !pcie_aspm_enabled(pdev)) {
 		nvme_dev_disable(ndev, true);
 		return 0;
 	}
@@ -2880,9 +2888,8 @@  static int nvme_suspend(struct device *d
 	    ctrl->state != NVME_CTRL_ADMIN_ONLY)
 		goto unfreeze;
 
-	ndev->last_ps = 0;
 	ret = nvme_get_power_state(ctrl, &ndev->last_ps);
-	if (ret < 0)
+	if (ret < 0 || ndev->last_ps == U32_MAX)
 		goto unfreeze;
 
 	ret = nvme_set_power_state(ctrl, ctrl->npss);
Index: linux-pm/drivers/pci/pcie/aspm.c
===================================================================
--- linux-pm.orig/drivers/pci/pcie/aspm.c
+++ linux-pm/drivers/pci/pcie/aspm.c
@@ -1170,6 +1170,26 @@  static int pcie_aspm_get_policy(char *bu
 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
 	NULL, 0644);
 
+/*
+ * pcie_aspm_enabled - Return the mask of enabled ASPM link states.
+ * @pci_device: Target device.
+ */
+u32 pcie_aspm_enabled(struct pci_dev *pci_device)
+{
+	struct pci_dev *bridge = pci_upstream_bridge(pci_device);
+	u32 ret;
+
+	if (!bridge)
+		return 0;
+
+	mutex_lock(&aspm_lock);
+	ret = bridge->link_state ? bridge->link_state->aspm_enabled : 0;
+	mutex_unlock(&aspm_lock);
+
+	return ret;
+}
+
+
 #ifdef CONFIG_PCIEASPM_DEBUG
 static ssize_t link_state_show(struct device *dev,
 		struct device_attribute *attr,
Index: linux-pm/include/linux/pci.h
===================================================================
--- linux-pm.orig/include/linux/pci.h
+++ linux-pm/include/linux/pci.h
@@ -1567,8 +1567,10 @@  extern bool pcie_ports_native;
 
 #ifdef CONFIG_PCIEASPM
 bool pcie_aspm_support_enabled(void);
+u32 pcie_aspm_enabled(struct pci_dev *pci_device);
 #else
 static inline bool pcie_aspm_support_enabled(void) { return false; }
+static inline u32 pcie_aspm_enabled(struct pci_dev *pci_device) { return 0; }
 #endif
 
 #ifdef CONFIG_PCIEAER