diff mbox

PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()

Message ID 3600031.yTsliOITBg@aspire.rjw.lan (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Rafael J. Wysocki Dec. 7, 2017, 2:26 a.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Middle-layer code doing suspend-time optimizations for devices with
the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
the ACPI PM domain) needs to make the core skip ->thaw_early and
->thaw callbacks for those devices in some cases and it sets the
power.direct_complete flag for them for this purpose.

However, it turns out that setting power.direct_complete outside of
the PM core is a bad idea as it triggers an excessive invocation of
pm_runtime_enable() in device_resume().

For this reason, provide a helper to clear power.is_late_suspended
and power.is_suspended to be invoked by the middle-layer code in
question instead of setting power.direct_complete and make that code
call the new helper.

Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/device_pm.c  |    2 +-
 drivers/base/power/main.c |   15 +++++++++++++++
 drivers/pci/pci-driver.c  |    2 +-
 include/linux/pm.h        |    1 +
 4 files changed, 18 insertions(+), 2 deletions(-)

Comments

Ulf Hansson Dec. 7, 2017, 7:44 p.m. UTC | #1
On 7 December 2017 at 03:26, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Middle-layer code doing suspend-time optimizations for devices with
> the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
> the ACPI PM domain) needs to make the core skip ->thaw_early and
> ->thaw callbacks for those devices in some cases and it sets the
> power.direct_complete flag for them for this purpose.
>
> However, it turns out that setting power.direct_complete outside of
> the PM core is a bad idea as it triggers an excessive invocation of
> pm_runtime_enable() in device_resume().

Do we need to clarify the comment about the flag in pm.h?

Or is "/* Owned by the PM core */" sufficient?

>
> For this reason, provide a helper to clear power.is_late_suspended
> and power.is_suspended to be invoked by the middle-layer code in
> question instead of setting power.direct_complete and make that code
> call the new helper.
>
> Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account)
> Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Reviewed-by: Ulf Hansson <ulf.hansson@linaro,org>

Kind regards
Uffe

> ---
>  drivers/acpi/device_pm.c  |    2 +-
>  drivers/base/power/main.c |   15 +++++++++++++++
>  drivers/pci/pci-driver.c  |    2 +-
>  include/linux/pm.h        |    1 +
>  4 files changed, 18 insertions(+), 2 deletions(-)
>
> Index: linux-pm/include/linux/pm.h
> ===================================================================
> --- linux-pm.orig/include/linux/pm.h
> +++ linux-pm/include/linux/pm.h
> @@ -765,6 +765,7 @@ extern int pm_generic_poweroff_late(stru
>  extern int pm_generic_poweroff(struct device *dev);
>  extern void pm_generic_complete(struct device *dev);
>
> +extern void dev_pm_skip_next_resume_phases(struct device *dev);
>  extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
>
>  #else /* !CONFIG_PM_SLEEP */
> Index: linux-pm/drivers/base/power/main.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/main.c
> +++ linux-pm/drivers/base/power/main.c
> @@ -526,6 +526,21 @@ static void dpm_watchdog_clear(struct dp
>  /*------------------------- Resume routines -------------------------*/
>
>  /**
> + * dev_pm_skip_next_resume_phases - Skip next system resume phases for device.
> + * @dev: Target device.
> + *
> + * Make the core skip the "early resume" and "resume" phases for @dev.
> + *
> + * This function can be called by middle-layer code during the "noirq" phase of
> + * system resume if necessary, but not by device drivers.
> + */
> +void dev_pm_skip_next_resume_phases(struct device *dev)
> +{
> +       dev->power.is_late_suspended = false;
> +       dev->power.is_suspended = false;
> +}
> +
> +/**
>   * device_resume_noirq - Execute a "noirq resume" callback for given device.
>   * @dev: Device to handle.
>   * @state: PM transition of the system being carried out.
> Index: linux-pm/drivers/pci/pci-driver.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pci-driver.c
> +++ linux-pm/drivers/pci/pci-driver.c
> @@ -999,7 +999,7 @@ static int pci_pm_thaw_noirq(struct devi
>          * the subsequent "thaw" callbacks for the device.
>          */
>         if (dev_pm_smart_suspend_and_suspended(dev)) {
> -               dev->power.direct_complete = true;
> +               dev_pm_skip_next_resume_phases(dev);
>                 return 0;
>         }
>
> Index: linux-pm/drivers/acpi/device_pm.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/device_pm.c
> +++ linux-pm/drivers/acpi/device_pm.c
> @@ -1138,7 +1138,7 @@ int acpi_subsys_thaw_noirq(struct device
>          * skip all of the subsequent "thaw" callbacks for the device.
>          */
>         if (dev_pm_smart_suspend_and_suspended(dev)) {
> -               dev->power.direct_complete = true;
> +               dev_pm_skip_next_resume_phases(dev);
>                 return 0;
>         }
>
>
Rafael J. Wysocki Dec. 7, 2017, 9:17 p.m. UTC | #2
On Thu, Dec 7, 2017 at 8:44 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> On 7 December 2017 at 03:26, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> Middle-layer code doing suspend-time optimizations for devices with
>> the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
>> the ACPI PM domain) needs to make the core skip ->thaw_early and
>> ->thaw callbacks for those devices in some cases and it sets the
>> power.direct_complete flag for them for this purpose.
>>
>> However, it turns out that setting power.direct_complete outside of
>> the PM core is a bad idea as it triggers an excessive invocation of
>> pm_runtime_enable() in device_resume().
>
> Do we need to clarify the comment about the flag in pm.h?
>
> Or is "/* Owned by the PM core */" sufficient?

That should be sufficient (and I sort of tried to ignore it ...).

>>
>> For this reason, provide a helper to clear power.is_late_suspended
>> and power.is_suspended to be invoked by the middle-layer code in
>> question instead of setting power.direct_complete and make that code
>> call the new helper.
>>
>> Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account)
>> Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro,org>

Thanks!
Bjorn Helgaas Dec. 8, 2017, 8:25 p.m. UTC | #3
On Thu, Dec 07, 2017 at 03:26:14AM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Middle-layer code doing suspend-time optimizations for devices with
> the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
> the ACPI PM domain) needs to make the core skip ->thaw_early and
> ->thaw callbacks for those devices in some cases and it sets the
> power.direct_complete flag for them for this purpose.
> 
> However, it turns out that setting power.direct_complete outside of
> the PM core is a bad idea as it triggers an excessive invocation of
> pm_runtime_enable() in device_resume().
> 
> For this reason, provide a helper to clear power.is_late_suspended
> and power.is_suspended to be invoked by the middle-layer code in
> question instead of setting power.direct_complete and make that code
> call the new helper.
> 
> Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account)
> Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

I don't pretend to understand this (and I don't need to, so don't
waste your time explaining), but I trust you :)

> ---
>  drivers/acpi/device_pm.c  |    2 +-
>  drivers/base/power/main.c |   15 +++++++++++++++
>  drivers/pci/pci-driver.c  |    2 +-
>  include/linux/pm.h        |    1 +
>  4 files changed, 18 insertions(+), 2 deletions(-)
> 
> Index: linux-pm/include/linux/pm.h
> ===================================================================
> --- linux-pm.orig/include/linux/pm.h
> +++ linux-pm/include/linux/pm.h
> @@ -765,6 +765,7 @@ extern int pm_generic_poweroff_late(stru
>  extern int pm_generic_poweroff(struct device *dev);
>  extern void pm_generic_complete(struct device *dev);
>  
> +extern void dev_pm_skip_next_resume_phases(struct device *dev);
>  extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
>  
>  #else /* !CONFIG_PM_SLEEP */
> Index: linux-pm/drivers/base/power/main.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/main.c
> +++ linux-pm/drivers/base/power/main.c
> @@ -526,6 +526,21 @@ static void dpm_watchdog_clear(struct dp
>  /*------------------------- Resume routines -------------------------*/
>  
>  /**
> + * dev_pm_skip_next_resume_phases - Skip next system resume phases for device.
> + * @dev: Target device.
> + *
> + * Make the core skip the "early resume" and "resume" phases for @dev.
> + *
> + * This function can be called by middle-layer code during the "noirq" phase of
> + * system resume if necessary, but not by device drivers.
> + */
> +void dev_pm_skip_next_resume_phases(struct device *dev)
> +{
> +	dev->power.is_late_suspended = false;
> +	dev->power.is_suspended = false;
> +}
> +
> +/**
>   * device_resume_noirq - Execute a "noirq resume" callback for given device.
>   * @dev: Device to handle.
>   * @state: PM transition of the system being carried out.
> Index: linux-pm/drivers/pci/pci-driver.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pci-driver.c
> +++ linux-pm/drivers/pci/pci-driver.c
> @@ -999,7 +999,7 @@ static int pci_pm_thaw_noirq(struct devi
>  	 * the subsequent "thaw" callbacks for the device.
>  	 */
>  	if (dev_pm_smart_suspend_and_suspended(dev)) {
> -		dev->power.direct_complete = true;
> +		dev_pm_skip_next_resume_phases(dev);
>  		return 0;
>  	}
>  
> Index: linux-pm/drivers/acpi/device_pm.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/device_pm.c
> +++ linux-pm/drivers/acpi/device_pm.c
> @@ -1138,7 +1138,7 @@ int acpi_subsys_thaw_noirq(struct device
>  	 * skip all of the subsequent "thaw" callbacks for the device.
>  	 */
>  	if (dev_pm_smart_suspend_and_suspended(dev)) {
> -		dev->power.direct_complete = true;
> +		dev_pm_skip_next_resume_phases(dev);
>  		return 0;
>  	}
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rafael J. Wysocki Dec. 9, 2017, 2:13 p.m. UTC | #4
On Fri, Dec 8, 2017 at 9:25 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> On Thu, Dec 07, 2017 at 03:26:14AM +0100, Rafael J. Wysocki wrote:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> Middle-layer code doing suspend-time optimizations for devices with
>> the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
>> the ACPI PM domain) needs to make the core skip ->thaw_early and
>> ->thaw callbacks for those devices in some cases and it sets the
>> power.direct_complete flag for them for this purpose.
>>
>> However, it turns out that setting power.direct_complete outside of
>> the PM core is a bad idea as it triggers an excessive invocation of
>> pm_runtime_enable() in device_resume().
>>
>> For this reason, provide a helper to clear power.is_late_suspended
>> and power.is_suspended to be invoked by the middle-layer code in
>> question instead of setting power.direct_complete and make that code
>> call the new helper.
>>
>> Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account)
>> Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
>
> I don't pretend to understand this (and I don't need to, so don't
> waste your time explaining), but I trust you :)

Thank you! :-)
diff mbox

Patch

Index: linux-pm/include/linux/pm.h
===================================================================
--- linux-pm.orig/include/linux/pm.h
+++ linux-pm/include/linux/pm.h
@@ -765,6 +765,7 @@  extern int pm_generic_poweroff_late(stru
 extern int pm_generic_poweroff(struct device *dev);
 extern void pm_generic_complete(struct device *dev);
 
+extern void dev_pm_skip_next_resume_phases(struct device *dev);
 extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
 
 #else /* !CONFIG_PM_SLEEP */
Index: linux-pm/drivers/base/power/main.c
===================================================================
--- linux-pm.orig/drivers/base/power/main.c
+++ linux-pm/drivers/base/power/main.c
@@ -526,6 +526,21 @@  static void dpm_watchdog_clear(struct dp
 /*------------------------- Resume routines -------------------------*/
 
 /**
+ * dev_pm_skip_next_resume_phases - Skip next system resume phases for device.
+ * @dev: Target device.
+ *
+ * Make the core skip the "early resume" and "resume" phases for @dev.
+ *
+ * This function can be called by middle-layer code during the "noirq" phase of
+ * system resume if necessary, but not by device drivers.
+ */
+void dev_pm_skip_next_resume_phases(struct device *dev)
+{
+	dev->power.is_late_suspended = false;
+	dev->power.is_suspended = false;
+}
+
+/**
  * device_resume_noirq - Execute a "noirq resume" callback for given device.
  * @dev: Device to handle.
  * @state: PM transition of the system being carried out.
Index: linux-pm/drivers/pci/pci-driver.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-driver.c
+++ linux-pm/drivers/pci/pci-driver.c
@@ -999,7 +999,7 @@  static int pci_pm_thaw_noirq(struct devi
 	 * the subsequent "thaw" callbacks for the device.
 	 */
 	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.direct_complete = true;
+		dev_pm_skip_next_resume_phases(dev);
 		return 0;
 	}
 
Index: linux-pm/drivers/acpi/device_pm.c
===================================================================
--- linux-pm.orig/drivers/acpi/device_pm.c
+++ linux-pm/drivers/acpi/device_pm.c
@@ -1138,7 +1138,7 @@  int acpi_subsys_thaw_noirq(struct device
 	 * skip all of the subsequent "thaw" callbacks for the device.
 	 */
 	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.direct_complete = true;
+		dev_pm_skip_next_resume_phases(dev);
 		return 0;
 	}