pci: fix bridge 64bit flag setting

Commit Message

Yinghai Lu Dec. 1, 2009, 7:03 a.m. UTC

None

Patch

Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -289,7 +289,6 @@  static void pci_setup_bridge_mmio_pref(s
 	struct resource *res;
 	struct pci_bus_region region;
 	u32 l, bu, lu;
-	int pref_mem64;
 
 	/* Clear out the upper 32 bits of PREF limit.
 	   If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -297,7 +296,6 @@  static void pci_setup_bridge_mmio_pref(s
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
 
 	/* Set up PREF base/limit. */
-	pref_mem64 = 0;
 	bu = lu = 0;
 	res = bus->resource[2];
 	pcibios_resource_to_bus(bridge, &region, res);
@@ -305,7 +303,6 @@  static void pci_setup_bridge_mmio_pref(s
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		if (res->flags & IORESOURCE_MEM_64) {
-			pref_mem64 = 1;
 			bu = upper_32_bits(region.start);
 			lu = upper_32_bits(region.end);
 		}
@@ -317,7 +314,7 @@  static void pci_setup_bridge_mmio_pref(s
 	}
 	pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
 
-	if (pref_mem64) {
+	if (res->flags & PCI_PREF_RANGE_TYPE_64) {
 		/* Set the upper 32 bits of PREF base & limit. */
 		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
 		pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
@@ -385,8 +382,10 @@  static void pci_bridge_check_ranges(stru
 	}
 	if (pmem) {
 		b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
-		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
 			b_res[2].flags |= IORESOURCE_MEM_64;
+			b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+		}
 	}
 
 	/* double check if bridge does support 64 bit pref */