===================================================================
@@ -2009,6 +2009,12 @@ and is between 256 and 4096 characters.
for broken drivers that don't call it.
skip_isa_align [X86] do not align io start addr, so can
handle more pci cards
+ try=n set the pci_try_num to reallocate the pci bridge resource
+ 1: default
+ 2: will set the num to max_depth, and try to reallocate res
+ to get big range for the bridge. assume the pci peer root
+ resource is right from _CRS or from hostbridge pci reg
+ reading out.
firmware [ARM] Do not re-enumerate the bus but instead
just use the configuration from the
bootloader. This is currently used on
===================================================================
@@ -2983,6 +2983,10 @@ static int __init pci_setup(char *str)
pci_no_aer();
} else if (!strcmp(str, "nodomains")) {
pci_no_domains();
+ } else if (!strncmp(str, "try=", 4)) {
+ int try_num = memparse(str + 4, &str);
+ if (try_num > 0)
+ pci_try_num = try_num;
} else if (!strncmp(str, "cbiosize=", 9)) {
pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
===================================================================
@@ -212,6 +212,8 @@ static inline int pci_ari_enabled(struct
return bus->self && bus->self->ari_enabled;
}
+extern int pci_try_num;
+
#ifdef CONFIG_PCI_QUIRKS
extern int pci_is_reassigndev(struct pci_dev *dev);
resource_size_t pci_specified_resource_alignment(struct pci_dev *dev);
===================================================================
@@ -869,6 +869,7 @@ static int __init pci_get_max_depth(void
* second and later try will clear small leaf bridge res
* will stop till to the max deepth if can not find good one
*/
+int pci_try_num = 1;
void __init
pci_assign_unassigned_resources(void)
{
@@ -879,14 +880,17 @@ pci_assign_unassigned_resources(void)
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
unsigned long failed_type;
- int max_depth = pci_get_max_depth();
- int pci_try_num;
head.next = NULL;
- pci_try_num = max_depth + 1;
- printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
- max_depth, pci_try_num);
+ if (pci_try_num > 1) {
+ int max_depth = pci_get_max_depth();
+
+ if (max_depth + 1 > pci_try_num)
+ pci_try_num = max_depth + 1;
+ printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
+ }
again:
/* Depth first, calculate sizes and alignments of all