diff mbox series

[v5,1/5] dt-bindings: PCI: add snps,dw-pcie.yaml

Message ID 53363a7609176ca56c47ef57287466ee84087dc5.1626608375.git.mchehab+huawei@kernel.org (mailing list archive)
State Not Applicable
Delegated to: Lorenzo Pieralisi
Headers show
Series convert designware-pcie.txt to yaml | expand

Commit Message

Mauro Carvalho Chehab July 18, 2021, 11:40 a.m. UTC
Currently, the designware schema is defined on a text file:
	designware-pcie.txt

Convert the pci-bus part into a schema.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../devicetree/bindings/pci/snps,dw-pcie.yaml | 102 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 103 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml

Comments

Rob Herring (Arm) July 19, 2021, 10:02 p.m. UTC | #1
On Sun, 18 Jul 2021 13:40:48 +0200, Mauro Carvalho Chehab wrote:
> Currently, the designware schema is defined on a text file:
> 	designware-pcie.txt
> 
> Convert the pci-bus part into a schema.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../devicetree/bindings/pci/snps,dw-pcie.yaml | 102 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 103 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 000000000000..d4441d822b91
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    anyOf:
+      - {}
+      - const: snps,dw-pcie
+
+  reg:
+    description: |
+      It should contain Data Bus Interface (dbi) and config registers for all
+      versions.
+      For designware core version >= 4.80, it may contain ATU address space.
+    minItems: 2
+    maxItems: 5
+
+  reg-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      enum: [dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link]
+
+  num-lanes:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      number of lanes to use (this property should be specified unless
+      the link is brought already up in BIOS)
+    maximum: 16
+
+  reset-gpio:
+    description: GPIO pin number of PERST# signal
+    maxItems: 1
+    deprecated: true
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks: true
+
+  snps,enable-cdm-check:
+    type: boolean
+    description: |
+      This is a boolean property and if present enables
+      automatic checking of CDM (Configuration Dependent Module) registers
+      for data corruption. CDM registers include standard PCIe configuration
+      space registers, Port Logic registers, DMA and iATU (internal Address
+      Translation Unit) registers.
+
+  num-viewport:
+    description: |
+      number of view ports configured in hardware. If a platform
+      does not specify it, the driver autodetects it.
+    deprecated: true
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - compatible
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      pcie@dfc00000 {
+        device_type = "pci";
+        compatible = "snps,dw-pcie";
+        reg = <0xdfc00000 0x0001000>, /* IP registers */
+              <0xd0000000 0x0002000>; /* Configuration space */
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+        interrupts = <25>, <24>;
+        #interrupt-cells = <1>;
+        num-lanes = <1>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index fb6971bc28c5..c88f6cb37e47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14306,6 +14306,7 @@  M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
+F:	Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
 F:	drivers/pci/controller/dwc/*designware*
 
 PCI DRIVER FOR TI DRA7XX/J721E