diff mbox

dummy-irq: introduce a dummy IRQ handler driver (was Re: gm45 intel gfx can generate non-MSI irq# in MSI mode (was Re: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt respo))

Message ID alpine.LNX.2.00.1303210018430.16237@pobox.suse.cz (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Jiri Kosina March 20, 2013, 11:21 p.m. UTC
On Wed, 20 Mar 2013, Alan Stern wrote:

> > Ok, so how about this?
> > Daniel, is it enough to make the problem appear on your system (by 
> > building this into the kernel and booting with dummy-irq.irq=16)?
> > 
> > Thanks.
> > 
> > From: Jiri Kosina <jkosina@suse.cz>
> > Subject: [PATCH] dummy-irq: introduce a dummy IRQ handler driver
> > 
> > This module accepts a single 'irq' parameter, which it should register for.
> > 
> > Its sole purpose is to help with debugging of IRQ sharing problems, by
> > force-enabling IRQ that would otherwise be disabled.
> > 
> > Suggested-by: Alan Stern <stern@rowland.harvard.edu>
> > Signed-off-by: Jiri Kosina <jkosina@suse.cz>
> 
> This is just what I was thinking of.  Three extremely minor 
> suggestions...

Thanks Alan. Updated version below.

Greg, willing to merge this simple debugging facility?


From: Jiri Kosina <jkosina@suse.cz>
Subject: [PATCH] dummy-irq: introduce a dummy IRQ handler driver

This module accepts a single 'irq' parameter, which it should register for.

Its sole purpose is to help with debugging of IRQ sharing problems, by
force-enabling IRQ that would otherwise be disabled.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/misc/Kconfig     |    8 ++++++
 drivers/misc/Makefile    |    1 +
 drivers/misc/dummy-irq.c |   59 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/dummy-irq.c

Comments

Greg KH March 20, 2013, 11:37 p.m. UTC | #1
On Thu, Mar 21, 2013 at 12:21:21AM +0100, Jiri Kosina wrote:
> On Wed, 20 Mar 2013, Alan Stern wrote:
> 
> > > Ok, so how about this?
> > > Daniel, is it enough to make the problem appear on your system (by 
> > > building this into the kernel and booting with dummy-irq.irq=16)?
> > > 
> > > Thanks.
> > > 
> > > From: Jiri Kosina <jkosina@suse.cz>
> > > Subject: [PATCH] dummy-irq: introduce a dummy IRQ handler driver
> > > 
> > > This module accepts a single 'irq' parameter, which it should register for.
> > > 
> > > Its sole purpose is to help with debugging of IRQ sharing problems, by
> > > force-enabling IRQ that would otherwise be disabled.
> > > 
> > > Suggested-by: Alan Stern <stern@rowland.harvard.edu>
> > > Signed-off-by: Jiri Kosina <jkosina@suse.cz>
> > 
> > This is just what I was thinking of.  Three extremely minor 
> > suggestions...
> 
> Thanks Alan. Updated version below.
> 
> Greg, willing to merge this simple debugging facility?

Yes, I'll take it, give me a few days to catch up with my pending queue,
don't worry, it's not lost.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Daniel Vetter March 21, 2013, 2:45 p.m. UTC | #2
On Thu, Mar 21, 2013 at 12:21:21AM +0100, Jiri Kosina wrote:
> On Wed, 20 Mar 2013, Alan Stern wrote:
> 
> > > Ok, so how about this?
> > > Daniel, is it enough to make the problem appear on your system (by 
> > > building this into the kernel and booting with dummy-irq.irq=16)?
> > > 
> > > Thanks.
> > > 
> > > From: Jiri Kosina <jkosina@suse.cz>
> > > Subject: [PATCH] dummy-irq: introduce a dummy IRQ handler driver
> > > 
> > > This module accepts a single 'irq' parameter, which it should register for.
> > > 
> > > Its sole purpose is to help with debugging of IRQ sharing problems, by
> > > force-enabling IRQ that would otherwise be disabled.
> > > 
> > > Suggested-by: Alan Stern <stern@rowland.harvard.edu>
> > > Signed-off-by: Jiri Kosina <jkosina@suse.cz>
> > 
> > This is just what I was thinking of.  Three extremely minor 
> > suggestions...
> 
> Thanks Alan. Updated version below.
> 
> Greg, willing to merge this simple debugging facility?
> 
> 
> From: Jiri Kosina <jkosina@suse.cz>
> Subject: [PATCH] dummy-irq: introduce a dummy IRQ handler driver
> 
> This module accepts a single 'irq' parameter, which it should register for.
> 
> Its sole purpose is to help with debugging of IRQ sharing problems, by
> force-enabling IRQ that would otherwise be disabled.
> 
> Suggested-by: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Indeed, this is pretty useful and allowed me to quickly reproduce that
phantom irq on my gm45. Thanks to module reloading we can even reset the
kernel's irq disabling logic and so test different tricks quickly without
rebooting. Really useful.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Thanks, Daniel

> ---
>  drivers/misc/Kconfig     |    8 ++++++
>  drivers/misc/Makefile    |    1 +
>  drivers/misc/dummy-irq.c |   59 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 68 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/misc/dummy-irq.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index e83fdfe..69bb79d 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -93,6 +93,14 @@ config ATMEL_TCB_CLKSRC_BLOCK
>  	  TC can be used for other purposes, such as PWM generation and
>  	  interval timing.
>  
> +config DUMMY_IRQ
> +	tristate "Dummy IRQ handler"
> +	default n
> +	---help---
> +	  This module accepts a single 'irq' parameter, which it should register for.
> +	  The sole purpose of this module is to help with debugging of systems on
> +	  which spurious IRQs would happen on disabled IRQ vector.
> +
>  config IBM_ASM
>  	tristate "Device driver for IBM RSA service processor"
>  	depends on X86 && PCI && INPUT
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 35a1463..28ff261 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
>  obj-$(CONFIG_BMP085)		+= bmp085.o
>  obj-$(CONFIG_BMP085_I2C)	+= bmp085-i2c.o
>  obj-$(CONFIG_BMP085_SPI)	+= bmp085-spi.o
> +obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
>  obj-$(CONFIG_ICS932S401)	+= ics932s401.o
>  obj-$(CONFIG_LKDTM)		+= lkdtm.o
>  obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
> diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c
> new file mode 100644
> index 0000000..7014167
> --- /dev/null
> +++ b/drivers/misc/dummy-irq.c
> @@ -0,0 +1,59 @@
> +/*
> + * Dummy IRQ handler driver.
> + *
> + * This module only registers itself as a handler that is specified to it
> + * by the 'irq' parameter.
> + *
> + * The sole purpose of this module is to help with debugging of systems on
> + * which spurious IRQs would happen on disabled IRQ vector.
> + *
> + * Copyright (C) 2013 Jiri Kosina
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +#include <linux/module.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +
> +static int irq;
> +
> +static irqreturn_t dummy_interrupt(int irq, void *dev_id)
> +{
> +	static int count = 0;
> +
> +	if (count == 0) {
> +		printk(KERN_INFO "dummy-irq: interrupt occured on IRQ %d\n",
> +				irq);
> +		count++;
> +	}
> +
> +	return IRQ_NONE;
> +}
> +
> +static int __init dummy_irq_init(void)
> +{
> +	if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) {
> +		printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq);
> +		return -EIO;
> +	}
> +	printk(KERN_INFO "dummy-irq: registered for IRQ %d\n", irq);
> +	return 0;
> +}
> +
> +static void __exit dummy_irq_exit(void)
> +{
> +	printk(KERN_INFO "dummy-irq unloaded\n");
> +	free_irq(irq, &irq);
> +}
> +
> +module_init(dummy_irq_init);
> +module_exit(dummy_irq_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Jiri Kosina");
> +module_param(irq, uint, 0444);
> +MODULE_PARM_DESC(irq, "The IRQ to register for");
> 
> -- 
> Jiri Kosina
> SUSE Labs
Jiri Kosina March 31, 2013, 7:55 p.m. UTC | #3
On Thu, 21 Mar 2013, Daniel Vetter wrote:

> Indeed, this is pretty useful and allowed me to quickly reproduce that
> phantom irq on my gm45. Thanks to module reloading we can even reset the
> kernel's irq disabling logic and so test different tricks quickly without
> rebooting. Really useful.

Daniel,

out of curiosity, have you been able to make some sense of the phantom 
legacy IRQs on GM45 systems, or are we just staying with my original 
bandaid (disabling GMBUS IRQs), declaring GM45 broken in this respect?

Thanks,
Daniel Vetter April 1, 2013, 6:30 p.m. UTC | #4
On Sun, Mar 31, 2013 at 9:55 PM, Jiri Kosina <jkosina@suse.cz> wrote:
> On Thu, 21 Mar 2013, Daniel Vetter wrote:
>
>> Indeed, this is pretty useful and allowed me to quickly reproduce that
>> phantom irq on my gm45. Thanks to module reloading we can even reset the
>> kernel's irq disabling logic and so test different tricks quickly without
>> rebooting. Really useful.
>
> Daniel,
>
> out of curiosity, have you been able to make some sense of the phantom
> legacy IRQs on GM45 systems, or are we just staying with my original
> bandaid (disabling GMBUS IRQs), declaring GM45 broken in this respect?

I've played around with dummy-irq on my own gm45 and afaict every
gmbus interrupt generates both an msi and a legacy pci interrupt when
msi is enabled. Everything else (= other interrupt sources) seems to
work as expected, and disabling msi also papers over the issue.
There's also scary comments in our gm45 irq handler that we need msi
to paper over some other races.

So I've decided that I don't want to dwell any longer in this
particular dungeon and that your bandaid (of just disabling this mess)
is the real fix.

Thanks, Daniel
diff mbox

Patch

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index e83fdfe..69bb79d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -93,6 +93,14 @@  config ATMEL_TCB_CLKSRC_BLOCK
 	  TC can be used for other purposes, such as PWM generation and
 	  interval timing.
 
+config DUMMY_IRQ
+	tristate "Dummy IRQ handler"
+	default n
+	---help---
+	  This module accepts a single 'irq' parameter, which it should register for.
+	  The sole purpose of this module is to help with debugging of systems on
+	  which spurious IRQs would happen on disabled IRQ vector.
+
 config IBM_ASM
 	tristate "Device driver for IBM RSA service processor"
 	depends on X86 && PCI && INPUT
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 35a1463..28ff261 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 obj-$(CONFIG_BMP085)		+= bmp085.o
 obj-$(CONFIG_BMP085_I2C)	+= bmp085-i2c.o
 obj-$(CONFIG_BMP085_SPI)	+= bmp085-spi.o
+obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
 obj-$(CONFIG_ICS932S401)	+= ics932s401.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c
new file mode 100644
index 0000000..7014167
--- /dev/null
+++ b/drivers/misc/dummy-irq.c
@@ -0,0 +1,59 @@ 
+/*
+ * Dummy IRQ handler driver.
+ *
+ * This module only registers itself as a handler that is specified to it
+ * by the 'irq' parameter.
+ *
+ * The sole purpose of this module is to help with debugging of systems on
+ * which spurious IRQs would happen on disabled IRQ vector.
+ *
+ * Copyright (C) 2013 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+static int irq;
+
+static irqreturn_t dummy_interrupt(int irq, void *dev_id)
+{
+	static int count = 0;
+
+	if (count == 0) {
+		printk(KERN_INFO "dummy-irq: interrupt occured on IRQ %d\n",
+				irq);
+		count++;
+	}
+
+	return IRQ_NONE;
+}
+
+static int __init dummy_irq_init(void)
+{
+	if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) {
+		printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq);
+		return -EIO;
+	}
+	printk(KERN_INFO "dummy-irq: registered for IRQ %d\n", irq);
+	return 0;
+}
+
+static void __exit dummy_irq_exit(void)
+{
+	printk(KERN_INFO "dummy-irq unloaded\n");
+	free_irq(irq, &irq);
+}
+
+module_init(dummy_irq_init);
+module_exit(dummy_irq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jiri Kosina");
+module_param(irq, uint, 0444);
+MODULE_PARM_DESC(irq, "The IRQ to register for");