| Message ID | b4c5a5005d4549420cf6e86f31a01d3fb2876731.1633357368.git.naveennaidu479@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | Fix long standing AER Error Handling Issues | expand |
On 10/4/21 8:29 AM, Naveen Naidu wrote: > Before 010caed4ccb6 ("PCI/AER: Decode Error Source RequesterID") > the AER error logs looked like: > > pcieport 0000:00:03.0: AER: Corrected error received: id=0018 > pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018 (Receiver ID) > pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 > pcieport 0000:00:03.0: [ 6] BadTLP > > In 010caed4ccb6 ("PCI/AER: Decode Error Source Requester ID"), > the "id" field was removed from the AER error logs, so currently AER > logs look like: > > pcieport 0000:00:03.0: AER: Corrected error received: 0000:00:03:0 > pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) > pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 > pcieport 0000:00:03.0: [ 6] BadTLP > > The second line in the above logs prints "(Receiver ID)", even when > there is no "id" in the log line. This is confusing. > Starting your commit log to say that message are confusing and then talk about why will make it easier to understand why the change is needed. > Remove the "ID" from the aer_agent_string[]. The error logs will > look as follows (Sample from dummy error injected by aer-inject): > > pcieport 0000:00:03.0: AER: Corrected error received: 0000:00:03.0 > pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver) > pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 > pcieport 0000:00:03.0: [ 6] BadTLP > It is good to see before and after messages. However, it will be helpful to know why this change is necessary. It isn't very clear why in this commit log. > Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com > Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> Extra signed-off-by? > --- > drivers/pci/pcie/aer.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c > index 9784fdcf3006..241ff361b43c 100644 > --- a/drivers/pci/pcie/aer.c > +++ b/drivers/pci/pcie/aer.c > @@ -516,10 +516,10 @@ static const char *aer_uncorrectable_error_string[] = { > }; > > static const char *aer_agent_string[] = { > - "Receiver ID", > - "Requester ID", > - "Completer ID", > - "Transmitter ID" > + "Receiver", > + "Requester", > + "Completer", > + "Transmitter" > }; > > #define aer_stats_dev_attr(name, stats_array, strings_array, \ > @@ -703,7 +703,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) > const char *level; > > if (!info->status) { > - pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent ID)\n", > + pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent)\n", > aer_error_severity_string[info->severity]); > goto out; > } > thanks, -- Shuah
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 9784fdcf3006..241ff361b43c 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -516,10 +516,10 @@ static const char *aer_uncorrectable_error_string[] = { }; static const char *aer_agent_string[] = { - "Receiver ID", - "Requester ID", - "Completer ID", - "Transmitter ID" + "Receiver", + "Requester", + "Completer", + "Transmitter" }; #define aer_stats_dev_attr(name, stats_array, strings_array, \ @@ -703,7 +703,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) const char *level; if (!info->status) { - pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent ID)\n", + pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent)\n", aer_error_severity_string[info->severity]); goto out; }
Before 010caed4ccb6 ("PCI/AER: Decode Error Source RequesterID") the AER error logs looked like: pcieport 0000:00:03.0: AER: Corrected error received: id=0018 pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018 (Receiver ID) pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 pcieport 0000:00:03.0: [ 6] BadTLP In 010caed4ccb6 ("PCI/AER: Decode Error Source Requester ID"), the "id" field was removed from the AER error logs, so currently AER logs look like: pcieport 0000:00:03.0: AER: Corrected error received: 0000:00:03:0 pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 pcieport 0000:00:03.0: [ 6] BadTLP The second line in the above logs prints "(Receiver ID)", even when there is no "id" in the log line. This is confusing. Remove the "ID" from the aer_agent_string[]. The error logs will look as follows (Sample from dummy error injected by aer-inject): pcieport 0000:00:03.0: AER: Corrected error received: 0000:00:03.0 pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver) pcieport 0000:00:03.0: device [1b36:000c] error status/mask=00000040/0000e000 pcieport 0000:00:03.0: [ 6] BadTLP Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> --- drivers/pci/pcie/aer.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)