| Message ID | bb69c32871d162a06dfdd26ba958ea0a74b592d5.1736776658.git.andrea.porta@suse.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | Add support for RaspberryPi RP1 PCI device using a DT overlay | expand |
On 1/13/2025 6:58 AM, Andrea della Porta wrote: > The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz. > Add clk_rp1_xosc node to provide that. > > Signed-off-by: Andrea della Porta <andrea.porta@suse.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> I don't expect conflicts so this could go through the tree that will merge the misc driver (Greg?).
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 2bdbb6780242..ae3c0c153cea 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -16,6 +16,13 @@ chosen: chosen { stdout-path = "serial10:115200n8"; }; + clk_rp1_xosc: clock-50000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "rp1-xosc"; + clock-frequency = <50000000>; + }; + /* Will be filled by the bootloader */ memory@0 { device_type = "memory";
The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz. Add clk_rp1_xosc node to provide that. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> --- arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 7 +++++++ 1 file changed, 7 insertions(+)