[v2,6/6] PCI/MSI: Get rid of pci_enable_msi_block_auto() interface

Commit Message

Alexander Gordeev Sept. 5, 2013, 12:54 p.m. UTC

There are no consumers of pci_enable_msi_block_auto()
interface have left. Eliminate it for now.

Signed-off-by: Alexander Gordeev <[e-mail]>
---
 Documentation/PCI/MSI-HOWTO.txt |   42 +++++++-------------------------------
 drivers/pci/msi.c               |   22 --------------------
 include/linux/pci.h             |    7 ------
 3 files changed, 8 insertions(+), 63 deletions(-)

Patch

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 205eb5d..6c64151 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -167,49 +167,23 @@  constraints on the number of vectors that can be allocated;
 pci_enable_msi_block_part() returns as soon as it finds any constraint
 that doesn't allow the call to succeed.
 
-4.2.4 pci_enable_msi_block_auto
-
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
-
-This variation on pci_enable_msi() call allows a device driver to request
-the maximum possible number of MSIs.  The MSI specification only allows
-interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
-
-If this function returns a positive number, it indicates that it has
-succeeded and the returned value is the number of allocated interrupts. In
-this case, the function enables MSI on this device and updates dev->irq to
-be the lowest of the new interrupts assigned to it.  The other interrupts
-assigned to the device are in the range dev->irq to dev->irq + returned
-value - 1.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-If the device driver needs to know the number of interrupts the device
-supports it can pass the pointer count where that number is stored. The
-device driver must decide what action to take if pci_enable_msi_block_auto()
-succeeds, but returns a value less than the number of interrupts supported.
-If the device driver does not need to know the number of interrupts
-supported, it can set the pointer count to NULL.
-
-4.2.5 pci_disable_msi
+4.2.4 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
-This function should be used to undo the effect of pci_enable_msi_block(),
-pci_enable_msi(), pci_enable_msi_block_auto() or pci_enable_msi_block_part().
-Calling it restores dev->irq to the pin-based interrupt number and frees the
-previously allocated message signaled interrupt(s). The interrupt may
-subsequently be assigned to another device, so drivers should not cache the
-value of dev->irq.
+This function should be used to undo the effect of pci_enable_msi() or
+pci_enable_msi_block() or pci_enable_msi_block_part().  Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s).  The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
 
 Before calling this function, a device driver must always call free_irq()
 on any interrupt for which it previously called request_irq().
 Failure to do so results in a BUG_ON(), leaving the device with
 MSI enabled and thus leaking its vector.
 
-4.2.6 pci_get_msi_cap
+4.2.5 pci_get_msi_cap
 
 int pci_get_msi_cap(struct pci_dev *dev)
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index c50d518..d378600 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -879,28 +879,6 @@  int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
 }
 EXPORT_SYMBOL(pci_enable_msi_block);
 
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
-	int ret, nvec;
-
-	ret = pci_get_msi_cap(dev);
-	if (ret < 0)
-		return ret;
-
-	if (maxvec)
-		*maxvec = ret;
-
-	do {
-		nvec = ret;
-		ret = pci_enable_msi_block(dev, nvec);
-	} while (ret > 0);
-
-	if (ret < 0)
-		return ret;
-	return nvec;
-}
-EXPORT_SYMBOL(pci_enable_msi_block_auto);
-
 void pci_msi_shutdown(struct pci_dev *dev)
 {
 	struct msi_desc *desc;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b866048..c5c37de 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1138,12 +1138,6 @@  static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
 	return -1;
 }
 
-static inline int
-pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
-	return -1;
-}
-
 static inline void pci_msi_shutdown(struct pci_dev *dev)
 { }
 static inline void pci_disable_msi(struct pci_dev *dev)
@@ -1178,7 +1172,6 @@  int pci_get_msi_cap(struct pci_dev *dev);
 int pci_enable_msi_block_part(struct pci_dev *dev,
 			      unsigned int nvec, int nvec_mme);
 int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
 void pci_msi_shutdown(struct pci_dev *dev);
 void pci_disable_msi(struct pci_dev *dev);
 int pci_msix_table_size(struct pci_dev *dev);