diff mbox series

[v4,13/25] PCI: altera: Remove redundant error fabrication when device read fails

Message ID ed5020e5b008b28c33a90c9c1670cef2393d3b7e.1637243717.git.naveennaidu479@gmail.com (mailing list archive)
State Accepted
Headers show
Series Unify PCI error response checking | expand

Commit Message

Naveen Naidu Nov. 18, 2021, 2:03 p.m. UTC
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

The host controller drivers sets the error response values (~0) and
returns an error when faulty hardware read occurs. But the error
response value (~0) is already being set in PCI_OP_READ and
PCI_USER_READ_CONFIG whenever a read by host controller driver fails.

Thus, it's no longer necessary for the host controller drivers to
fabricate any error response.

This helps unify PCI error response checking and make error check
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/controller/pcie-altera.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 2513e9363236..a6bdf9aff833 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -510,10 +510,8 @@  static int altera_pcie_cfg_read(struct pci_bus *bus, unsigned int devfn,
 	if (altera_pcie_hide_rc_bar(bus, devfn, where))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	if (!altera_pcie_valid_device(pcie, bus, PCI_SLOT(devfn))) {
-		*value = 0xffffffff;
+	if (!altera_pcie_valid_device(pcie, bus, PCI_SLOT(devfn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	return _altera_pcie_cfg_read(pcie, bus->number, devfn, where, size,
 				     value);