| Message ID | 1440762575-21520-1-git-send-email-b.zolnierkie@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
[ + Stephen on cc: ] On Friday, August 28, 2015 01:49:35 PM Bartlomiej Zolnierkiewicz wrote: > CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were > incorrectly used as a bit numbers. Fix it. > > Tested on Exynos4210 based Origen board and on Exynos5250 based > Arndale board. > > Cc: Tomasz Figa <tomasz.figa@gmail.com> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Thomas Abraham <thomas.ab@samsung.com> > Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") > Reported-by: Dan Carpenter <dan.carpenter@oracle.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> > Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > v2: > - added Reviewed-by, Acked-by and Fixes tags (no code changes) > > Michael, please apply. Thank you. Gentle ping. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics > drivers/clk/samsung/clk-cpu.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c > index 7c1e1f5..2fe37f7 100644 > --- a/drivers/clk/samsung/clk-cpu.c > +++ b/drivers/clk/samsung/clk-cpu.c > @@ -164,7 +164,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, > * the values for DIV_COPY and DIV_HPM dividers need not be set. > */ > div0 = cfg_data->div0; > - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { > + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { > div1 = cfg_data->div1; > if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) > div1 = readl(base + E4210_DIV_CPU1) & > @@ -185,7 +185,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, > alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1; > WARN_ON(alt_div >= MAX_DIV); > > - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { > + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { > /* > * In Exynos4210, ATB clock parent is also mout_core. So > * ATB clock also needs to be mantained at safe speed. > @@ -206,7 +206,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, > writel(div0, base + E4210_DIV_CPU0); > wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL); > > - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { > + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { > writel(div1, base + E4210_DIV_CPU1); > wait_until_divider_stable(base + E4210_DIV_STAT_CPU1, > DIV_MASK_ALL); > @@ -225,7 +225,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, > unsigned long mux_reg; > > /* find out the divider values to use for clock data */ > - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { > + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { > while ((cfg_data->prate * 1000) != ndata->new_rate) { > if (cfg_data->prate == 0) > return -EINVAL; > @@ -240,7 +240,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, > writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU); > wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1); > > - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { > + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { > div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK); > div_mask |= E4210_DIV0_ATB_MASK; > } -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/28, Bartlomiej Zolnierkiewicz wrote: > CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were > incorrectly used as a bit numbers. Fix it. > > Tested on Exynos4210 based Origen board and on Exynos5250 based > Arndale board. > > Cc: Tomasz Figa <tomasz.figa@gmail.com> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Thomas Abraham <thomas.ab@samsung.com> > Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") > Reported-by: Dan Carpenter <dan.carpenter@oracle.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> > Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- Applied to clk-fixes
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c index 7c1e1f5..2fe37f7 100644 --- a/drivers/clk/samsung/clk-cpu.c +++ b/drivers/clk/samsung/clk-cpu.c @@ -164,7 +164,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, * the values for DIV_COPY and DIV_HPM dividers need not be set. */ div0 = cfg_data->div0; - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { div1 = cfg_data->div1; if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) div1 = readl(base + E4210_DIV_CPU1) & @@ -185,7 +185,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1; WARN_ON(alt_div >= MAX_DIV); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { /* * In Exynos4210, ATB clock parent is also mout_core. So * ATB clock also needs to be mantained at safe speed. @@ -206,7 +206,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, writel(div0, base + E4210_DIV_CPU0); wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL); - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { writel(div1, base + E4210_DIV_CPU1); wait_until_divider_stable(base + E4210_DIV_STAT_CPU1, DIV_MASK_ALL); @@ -225,7 +225,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, unsigned long mux_reg; /* find out the divider values to use for clock data */ - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { while ((cfg_data->prate * 1000) != ndata->new_rate) { if (cfg_data->prate == 0) return -EINVAL; @@ -240,7 +240,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU); wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK); div_mask |= E4210_DIV0_ATB_MASK; }
CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were incorrectly used as a bit numbers. Fix it. Tested on Exynos4210 based Origen board and on Exynos5250 based Arndale board. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Fixes: ddeac8d96 ("clk: samsung: add infrastructure to register cpu clocks") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- v2: - added Reviewed-by, Acked-by and Fixes tags (no code changes) Michael, please apply. Thank you. drivers/clk/samsung/clk-cpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)