mbox series

[net-next,00/10] Convert mlx4 to use auxiliary bus

Message ID 20230804150527.6117-1-petr.pavlu@suse.com (mailing list archive)
Headers show
Series Convert mlx4 to use auxiliary bus | expand

Message

Petr Pavlu Aug. 4, 2023, 3:05 p.m. UTC
This series converts the mlx4 drivers to use auxiliary bus, similarly to
how mlx5 was converted [1]. The first 6 patches are preparatory changes,
the remaining 4 are the final conversion.

Initial motivation for this change was to address a problem related to
loading mlx4_en/mlx4_ib by mlx4_core using request_module_nowait(). When
doing such a load in initrd, the operation is asynchronous to any init
control and can get unexpectedly affected/interrupted by an eventual
root switch. Using an auxiliary bus leaves these module loads to udevd
which better integrates with systemd processing. [2]

General benefit is to get rid of custom interface logic and instead use
a common facility available for this task. An obvious risk is that some
new bug is introduced by the conversion.

Leon Romanovsky was kind enough to check for me that the series passes
their verification tests.

[1] https://lore.kernel.org/netdev/20201101201542.2027568-1-leon@kernel.org/
[2] https://lore.kernel.org/netdev/0a361ac2-c6bd-2b18-4841-b1b991f0635e@suse.com/

Petr Pavlu (10):
  mlx4: Get rid of the mlx4_interface.get_dev callback
  mlx4: Rename member mlx4_en_dev.nb to netdev_nb
  mlx4: Replace the mlx4_interface.event callback with a notifier
  mlx4: Get rid of the mlx4_interface.activate callback
  mlx4: Move the bond work to the core driver
  mlx4: Avoid resetting MLX4_INTFF_BONDING per driver
  mlx4: Register mlx4 devices to an auxiliary virtual bus
  mlx4: Connect the ethernet part to the auxiliary bus
  mlx4: Connect the infiniband part to the auxiliary bus
  mlx4: Delete custom device management logic

 drivers/infiniband/hw/mlx4/main.c             | 207 ++++++----
 drivers/infiniband/hw/mlx4/mlx4_ib.h          |   2 +
 drivers/net/ethernet/mellanox/mlx4/Kconfig    |   1 +
 drivers/net/ethernet/mellanox/mlx4/en_main.c  | 141 ++++---
 .../net/ethernet/mellanox/mlx4/en_netdev.c    |  64 +---
 drivers/net/ethernet/mellanox/mlx4/intf.c     | 361 ++++++++++++------
 drivers/net/ethernet/mellanox/mlx4/main.c     | 110 ++++--
 drivers/net/ethernet/mellanox/mlx4/mlx4.h     |  16 +-
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h  |   4 +-
 include/linux/mlx4/device.h                   |  20 +
 include/linux/mlx4/driver.h                   |  42 +-
 11 files changed, 572 insertions(+), 396 deletions(-)


base-commit: 86b7e033d684a9d4ca20ad8e6f8b9300cf99668f

Comments

Jason Gunthorpe Aug. 4, 2023, 4:49 p.m. UTC | #1
On Fri, Aug 04, 2023 at 05:05:17PM +0200, Petr Pavlu wrote:
> This series converts the mlx4 drivers to use auxiliary bus, similarly to
> how mlx5 was converted [1]. The first 6 patches are preparatory changes,
> the remaining 4 are the final conversion.
> 
> Initial motivation for this change was to address a problem related to
> loading mlx4_en/mlx4_ib by mlx4_core using request_module_nowait(). When
> doing such a load in initrd, the operation is asynchronous to any init
> control and can get unexpectedly affected/interrupted by an eventual
> root switch. Using an auxiliary bus leaves these module loads to udevd
> which better integrates with systemd processing. [2]

Neat, I didn't realize that was a pain point for distros.

Jason
Tariq Toukan Aug. 9, 2023, 11:12 a.m. UTC | #2
On 04/08/2023 18:05, Petr Pavlu wrote:
> This series converts the mlx4 drivers to use auxiliary bus, similarly to
> how mlx5 was converted [1]. The first 6 patches are preparatory changes,
> the remaining 4 are the final conversion.
> 
> Initial motivation for this change was to address a problem related to
> loading mlx4_en/mlx4_ib by mlx4_core using request_module_nowait(). When
> doing such a load in initrd, the operation is asynchronous to any init
> control and can get unexpectedly affected/interrupted by an eventual
> root switch. Using an auxiliary bus leaves these module loads to udevd
> which better integrates with systemd processing. [2]
> 
> General benefit is to get rid of custom interface logic and instead use
> a common facility available for this task. An obvious risk is that some
> new bug is introduced by the conversion.
> 
> Leon Romanovsky was kind enough to check for me that the series passes
> their verification tests.
> 
> [1] https://lore.kernel.org/netdev/20201101201542.2027568-1-leon@kernel.org/
> [2] https://lore.kernel.org/netdev/0a361ac2-c6bd-2b18-4841-b1b991f0635e@suse.com/
> 
> Petr Pavlu (10):
>    mlx4: Get rid of the mlx4_interface.get_dev callback
>    mlx4: Rename member mlx4_en_dev.nb to netdev_nb
>    mlx4: Replace the mlx4_interface.event callback with a notifier
>    mlx4: Get rid of the mlx4_interface.activate callback
>    mlx4: Move the bond work to the core driver
>    mlx4: Avoid resetting MLX4_INTFF_BONDING per driver
>    mlx4: Register mlx4 devices to an auxiliary virtual bus
>    mlx4: Connect the ethernet part to the auxiliary bus
>    mlx4: Connect the infiniband part to the auxiliary bus
>    mlx4: Delete custom device management logic
> 
>   drivers/infiniband/hw/mlx4/main.c             | 207 ++++++----
>   drivers/infiniband/hw/mlx4/mlx4_ib.h          |   2 +
>   drivers/net/ethernet/mellanox/mlx4/Kconfig    |   1 +
>   drivers/net/ethernet/mellanox/mlx4/en_main.c  | 141 ++++---
>   .../net/ethernet/mellanox/mlx4/en_netdev.c    |  64 +---
>   drivers/net/ethernet/mellanox/mlx4/intf.c     | 361 ++++++++++++------
>   drivers/net/ethernet/mellanox/mlx4/main.c     | 110 ++++--
>   drivers/net/ethernet/mellanox/mlx4/mlx4.h     |  16 +-
>   drivers/net/ethernet/mellanox/mlx4/mlx4_en.h  |   4 +-
>   include/linux/mlx4/device.h                   |  20 +
>   include/linux/mlx4/driver.h                   |  42 +-
>   11 files changed, 572 insertions(+), 396 deletions(-)
> 
> 
> base-commit: 86b7e033d684a9d4ca20ad8e6f8b9300cf99668f

For the series:
Acked-by: Tariq Toukan <tariqt@nvidia.com>