@@ -179,7 +179,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
struct tcm_loop_hba *tl_hba;
struct tcm_loop_tpg *tl_tpg;
struct scatterlist *sgl_bidi = NULL;
- u32 sgl_bidi_count = 0;
+ u32 sgl_bidi_count = 0, transfer_length;
int rc;
tl_hba = *(struct tcm_loop_hba **)shost_priv(sc->device->host);
@@ -213,12 +213,21 @@ static void tcm_loop_submission_work(struct work_struct *work)
}
- if (!scsi_prot_sg_count(sc) && scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
+ transfer_length = scsi_transfer_length(sc);
+ if (!scsi_prot_sg_count(sc) &&
+ scsi_get_prot_op(sc) != SCSI_PROT_NORMAL) {
se_cmd->prot_pto = true;
+ /*
+ * loopback transport doesn't support
+ * WRITE_GENERATE, READ_STRIP protection
+ * information operations, go ahead unprotected.
+ */
+ transfer_length = scsi_bufflen(sc);
+ }
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- scsi_bufflen(sc), tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
@@ -665,8 +665,19 @@ sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
cmd->prot_type = dev->dev_attrib.pi_prot_type;
cmd->prot_length = dev->prot_length * sectors;
- pr_debug("%s: prot_type=%d, prot_length=%d prot_op=%d prot_checks=%d\n",
- __func__, cmd->prot_type, cmd->prot_length,
+
+ /**
+ * In case protection information exists over the wire
+ * we modify command data length to describe pure data.
+ * The actual transfer length is data length + protection
+ * length
+ **/
+ if (protect)
+ cmd->data_length = sectors * dev->dev_attrib.block_size;
+
+ pr_debug("%s: prot_type=%d, data_length=%d, prot_length=%d "
+ "prot_op=%d prot_checks=%d\n",
+ __func__, cmd->prot_type, cmd->data_length, cmd->prot_length,
cmd->prot_op, cmd->prot_checks);
return true;
In various areas of the code, it is assumed that se_cmd->data_length describes pure data. In case that protection information exists over the wire (protect bits is are on) the target core re-calculates the data length from the CDB and the backed device block size (instead of each transport peeking in the cdb). Modify loopback device to include protection information in the transferred data length (like other scsi transports). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> --- drivers/target/loopback/tcm_loop.c | 15 ++++++++++++--- drivers/target/target_core_sbc.c | 15 +++++++++++++-- 2 files changed, 25 insertions(+), 5 deletions(-)