diff mbox

[net-next,2/4] qed: Add iWARP out of order support

Message ID 1505841979-26365-3-git-send-email-Michal.Kalderon@cavium.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Kalderon, Michal Sept. 19, 2017, 5:26 p.m. UTC
iWARP requires OOO support which is already provided by the ll2
interface (until now was used only for iSCSI offload).
The changes mostly include opening a ll2 dedicated connection for
OOO and notifiying the FW about the handle id.

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
 drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
 drivers/net/ethernet/qlogic/qed/qed_rdma.c  |  7 +++--
 3 files changed, 59 insertions(+), 3 deletions(-)

Comments

Leon Romanovsky Sept. 19, 2017, 5:45 p.m. UTC | #1
On Tue, Sep 19, 2017 at 08:26:17PM +0300, Michal Kalderon wrote:
> iWARP requires OOO support which is already provided by the ll2
> interface (until now was used only for iSCSI offload).
> The changes mostly include opening a ll2 dedicated connection for
> OOO and notifiying the FW about the handle id.
>
> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
> ---
>  drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
>  drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
>  drivers/net/ethernet/qlogic/qed/qed_rdma.c  |  7 +++--
>  3 files changed, 59 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> index 9d989c9..568e985 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> @@ -41,6 +41,7 @@
>  #include "qed_rdma.h"
>  #include "qed_reg_addr.h"
>  #include "qed_sp.h"
> +#include "qed_ooo.h"
>
>  #define QED_IWARP_ORD_DEFAULT		32
>  #define QED_IWARP_IRD_DEFAULT		32
> @@ -119,6 +120,13 @@ static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
>  	spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
>  }
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> +			      struct iwarp_init_func_params *p_ramrod)
> +{
> +	p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
> +				    p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
> +}
> +
>  static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
>  {
>  	int rc;
> @@ -1876,6 +1884,16 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  		iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
>  	}
>
> +	if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
> +		rc = qed_ll2_terminate_connection(p_hwfn,
> +						  iwarp_info->ll2_ooo_handle);
> +		if (rc)
> +			DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");

What exactly will you do with this knowledge? Anyway you are not
interested in return values of qed_ll2_terminate_connection function in
this place and other places too.

Why don't you handle EAGAIN returned from the qed_ll2_terminate_connection()?

Thanks

> +
> +		qed_ll2_release_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> +		iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
> +	}
> +
>  	qed_llh_remove_mac_filter(p_hwfn,
>  				  p_ptt, p_hwfn->p_rdma_info->iwarp.mac_addr);
>  	return rc;
> @@ -1927,10 +1945,12 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  	struct qed_iwarp_info *iwarp_info;
>  	struct qed_ll2_acquire_data data;
>  	struct qed_ll2_cbs cbs;
> +	u16 n_ooo_bufs;
>  	int rc = 0;
>
>  	iwarp_info = &p_hwfn->p_rdma_info->iwarp;
>  	iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
> +	iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
>
>  	iwarp_info->max_mtu = params->max_mtu;
>
> @@ -1978,6 +1998,29 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>  	if (rc)
>  		goto err;
>
> +	/* Start OOO connection */
> +	data.input.conn_type = QED_LL2_TYPE_OOO;
> +	data.input.mtu = params->max_mtu;
> +
> +	n_ooo_bufs = (QED_IWARP_MAX_OOO * QED_IWARP_RCV_WND_SIZE_DEF) /
> +		     iwarp_info->max_mtu;
> +	n_ooo_bufs = min_t(u32, n_ooo_bufs, QED_IWARP_LL2_OOO_MAX_RX_SIZE);
> +
> +	data.input.rx_num_desc = n_ooo_bufs;
> +	data.input.rx_num_ooo_buffers = n_ooo_bufs;
> +
> +	data.input.tx_max_bds_per_packet = 1;	/* will never be fragmented */
> +	data.input.tx_num_desc = QED_IWARP_LL2_OOO_DEF_TX_SIZE;
> +	data.p_connection_handle = &iwarp_info->ll2_ooo_handle;
> +
> +	rc = qed_ll2_acquire_connection(p_hwfn, &data);
> +	if (rc)
> +		goto err;
> +
> +	rc = qed_ll2_establish_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> +	if (rc)
> +		goto err;
> +
>  	return rc;
>  err:
>  	qed_iwarp_ll2_stop(p_hwfn, p_ptt);
> @@ -2014,6 +2057,7 @@ int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
>
>  	qed_spq_register_async_cb(p_hwfn, PROTOCOLID_IWARP,
>  				  qed_iwarp_async_event);
> +	qed_ooo_setup(p_hwfn);
>
>  	return qed_iwarp_ll2_start(p_hwfn, params, p_ptt);
>  }
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> index 148ef3c..9e2bfde 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> @@ -47,7 +47,12 @@ enum qed_iwarp_qp_state {
>  #define QED_IWARP_LL2_SYN_TX_SIZE       (128)
>  #define QED_IWARP_LL2_SYN_RX_SIZE       (256)
>  #define QED_IWARP_MAX_SYN_PKT_SIZE      (128)
> -#define QED_IWARP_HANDLE_INVAL			(0xff)
> +
> +#define QED_IWARP_LL2_OOO_DEF_TX_SIZE   (256)
> +#define QED_IWARP_MAX_OOO		(16)
> +#define QED_IWARP_LL2_OOO_MAX_RX_SIZE   (16384)
> +
> +#define QED_IWARP_HANDLE_INVAL		(0xff)
>
>  struct qed_iwarp_ll2_buff {
>  	void *data;
> @@ -67,6 +72,7 @@ struct qed_iwarp_info {
>  	u8 crc_needed;
>  	u8 tcp_flags;
>  	u8 ll2_syn_handle;
> +	u8 ll2_ooo_handle;
>  	u8 peer2peer;
>  	enum mpa_negotiation_mode mpa_rev;
>  	enum mpa_rtr_type rtr_type;
> @@ -147,6 +153,9 @@ struct qed_iwarp_listener {
>  int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
>  		    struct qed_rdma_start_in_params *params);
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> +			      struct iwarp_init_func_params *p_ramrod);
> +
>  int qed_iwarp_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
>
>  void qed_iwarp_resc_free(struct qed_hwfn *p_hwfn);
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> index 06715f7..4f46f28 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> @@ -551,10 +551,13 @@ static int qed_rdma_start_fw(struct qed_hwfn *p_hwfn,
>  	if (rc)
>  		return rc;
>
> -	if (QED_IS_IWARP_PERSONALITY(p_hwfn))
> +	if (QED_IS_IWARP_PERSONALITY(p_hwfn)) {
> +		qed_iwarp_init_fw_ramrod(p_hwfn,
> +					 &p_ent->ramrod.iwarp_init_func.iwarp);
>  		p_ramrod = &p_ent->ramrod.iwarp_init_func.rdma;
> -	else
> +	} else {
>  		p_ramrod = &p_ent->ramrod.roce_init_func.rdma;
> +	}
>
>  	p_params_header = &p_ramrod->params_header;
>  	p_params_header->cnq_start_offset = (u8)RESC_START(p_hwfn,
> --
> 1.8.3.1
>
Kalderon, Michal Sept. 20, 2017, 6:03 a.m. UTC | #2
From: Leon Romanovsky <leon@kernel.org>
Sent: Tuesday, September 19, 2017 8:45 PM
On Tue, Sep 19, 2017 at 08:26:17PM +0300, Michal Kalderon wrote:
>> iWARP requires OOO support which is already provided by the ll2
>> interface (until now was used only for iSCSI offload).
>> The changes mostly include opening a ll2 dedicated connection for
>> OOO and notifiying the FW about the handle id.
>>
>> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
>> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
>> ---
>>  drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
>>  drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
>>  drivers/net/ethernet/qlogic/qed/qed_rdma.c  |  7 +++--
>>  3 files changed, 59 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
>> index 9d989c9..568e985 100644
>> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
>> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
>> @@ -41,6 +41,7 @@
>>  #include "qed_rdma.h"
>>  #include "qed_reg_addr.h"
>>  #include "qed_sp.h"
>> +#include "qed_ooo.h"
>>
>>  #define QED_IWARP_ORD_DEFAULT                32
>>  #define QED_IWARP_IRD_DEFAULT                32
>> @@ -119,6 +120,13 @@ static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
>>       spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
>>  }
>>
>> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
>> +                           struct iwarp_init_func_params *p_ramrod)
>> +{
>> +     p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
>> +                                 p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
>> +}
>> +
>>  static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
>>  {
>>       int rc;
>> @@ -1876,6 +1884,16 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
>>               iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
>>       }
>>
>> +     if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
>> +             rc = qed_ll2_terminate_connection(p_hwfn,
>> +                                               iwarp_info->ll2_ooo_handle);
>> +             if (rc)
>> +                     DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");
>
>What exactly will you do with this knowledge? Anyway you are not
>interested in return values of qed_ll2_terminate_connection function in
>this place and other places too.
>
>Why don't you handle EAGAIN returned from the qed_ll2_terminate_connection()?
>
>Thanks
Thanks for pointing this out, you're right we could have ignored the return code, as there's
not much we can do at this point if it failed. But I still feel failures are worth knowing about,
and could help in analysis if they unexpectedly lead to another issue.
As for EAGAIN, it is very unlikely that we'll get this return code. Will consider adding generic
handling for this as a separate patch, as this currently isn't handled in any of the ll2 flows.
thanks,--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index 9d989c9..568e985 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -41,6 +41,7 @@ 
 #include "qed_rdma.h"
 #include "qed_reg_addr.h"
 #include "qed_sp.h"
+#include "qed_ooo.h"
 
 #define QED_IWARP_ORD_DEFAULT		32
 #define QED_IWARP_IRD_DEFAULT		32
@@ -119,6 +120,13 @@  static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
 	spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
 }
 
+void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
+			      struct iwarp_init_func_params *p_ramrod)
+{
+	p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
+				    p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
+}
+
 static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
 {
 	int rc;
@@ -1876,6 +1884,16 @@  static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 		iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
 	}
 
+	if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
+		rc = qed_ll2_terminate_connection(p_hwfn,
+						  iwarp_info->ll2_ooo_handle);
+		if (rc)
+			DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");
+
+		qed_ll2_release_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
+		iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
+	}
+
 	qed_llh_remove_mac_filter(p_hwfn,
 				  p_ptt, p_hwfn->p_rdma_info->iwarp.mac_addr);
 	return rc;
@@ -1927,10 +1945,12 @@  static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 	struct qed_iwarp_info *iwarp_info;
 	struct qed_ll2_acquire_data data;
 	struct qed_ll2_cbs cbs;
+	u16 n_ooo_bufs;
 	int rc = 0;
 
 	iwarp_info = &p_hwfn->p_rdma_info->iwarp;
 	iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
+	iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
 
 	iwarp_info->max_mtu = params->max_mtu;
 
@@ -1978,6 +1998,29 @@  static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 	if (rc)
 		goto err;
 
+	/* Start OOO connection */
+	data.input.conn_type = QED_LL2_TYPE_OOO;
+	data.input.mtu = params->max_mtu;
+
+	n_ooo_bufs = (QED_IWARP_MAX_OOO * QED_IWARP_RCV_WND_SIZE_DEF) /
+		     iwarp_info->max_mtu;
+	n_ooo_bufs = min_t(u32, n_ooo_bufs, QED_IWARP_LL2_OOO_MAX_RX_SIZE);
+
+	data.input.rx_num_desc = n_ooo_bufs;
+	data.input.rx_num_ooo_buffers = n_ooo_bufs;
+
+	data.input.tx_max_bds_per_packet = 1;	/* will never be fragmented */
+	data.input.tx_num_desc = QED_IWARP_LL2_OOO_DEF_TX_SIZE;
+	data.p_connection_handle = &iwarp_info->ll2_ooo_handle;
+
+	rc = qed_ll2_acquire_connection(p_hwfn, &data);
+	if (rc)
+		goto err;
+
+	rc = qed_ll2_establish_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
+	if (rc)
+		goto err;
+
 	return rc;
 err:
 	qed_iwarp_ll2_stop(p_hwfn, p_ptt);
@@ -2014,6 +2057,7 @@  int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
 
 	qed_spq_register_async_cb(p_hwfn, PROTOCOLID_IWARP,
 				  qed_iwarp_async_event);
+	qed_ooo_setup(p_hwfn);
 
 	return qed_iwarp_ll2_start(p_hwfn, params, p_ptt);
 }
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
index 148ef3c..9e2bfde 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
@@ -47,7 +47,12 @@  enum qed_iwarp_qp_state {
 #define QED_IWARP_LL2_SYN_TX_SIZE       (128)
 #define QED_IWARP_LL2_SYN_RX_SIZE       (256)
 #define QED_IWARP_MAX_SYN_PKT_SIZE      (128)
-#define QED_IWARP_HANDLE_INVAL			(0xff)
+
+#define QED_IWARP_LL2_OOO_DEF_TX_SIZE   (256)
+#define QED_IWARP_MAX_OOO		(16)
+#define QED_IWARP_LL2_OOO_MAX_RX_SIZE   (16384)
+
+#define QED_IWARP_HANDLE_INVAL		(0xff)
 
 struct qed_iwarp_ll2_buff {
 	void *data;
@@ -67,6 +72,7 @@  struct qed_iwarp_info {
 	u8 crc_needed;
 	u8 tcp_flags;
 	u8 ll2_syn_handle;
+	u8 ll2_ooo_handle;
 	u8 peer2peer;
 	enum mpa_negotiation_mode mpa_rev;
 	enum mpa_rtr_type rtr_type;
@@ -147,6 +153,9 @@  struct qed_iwarp_listener {
 int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
 		    struct qed_rdma_start_in_params *params);
 
+void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
+			      struct iwarp_init_func_params *p_ramrod);
+
 int qed_iwarp_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
 
 void qed_iwarp_resc_free(struct qed_hwfn *p_hwfn);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 06715f7..4f46f28 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -551,10 +551,13 @@  static int qed_rdma_start_fw(struct qed_hwfn *p_hwfn,
 	if (rc)
 		return rc;
 
-	if (QED_IS_IWARP_PERSONALITY(p_hwfn))
+	if (QED_IS_IWARP_PERSONALITY(p_hwfn)) {
+		qed_iwarp_init_fw_ramrod(p_hwfn,
+					 &p_ent->ramrod.iwarp_init_func.iwarp);
 		p_ramrod = &p_ent->ramrod.iwarp_init_func.rdma;
-	else
+	} else {
 		p_ramrod = &p_ent->ramrod.roce_init_func.rdma;
+	}
 
 	p_params_header = &p_ramrod->params_header;
 	p_params_header->cnq_start_offset = (u8)RESC_START(p_hwfn,