diff mbox series

[v2,for-next,3/7] RDMA/hns: Avoid setting loopback indicator when smac is same as dmac

Message ID 1605526408-6936-4-git-send-email-liweihang@huawei.com (mailing list archive)
State Accepted
Delegated to: Jason Gunthorpe
Headers show
Series RDMA/hns: Support UD for HIP09 | expand

Commit Message

Weihang Li Nov. 16, 2020, 11:33 a.m. UTC 
The loopback flag will be set to 1 by the hardware when the source mac
address is same as the destination mac address. So the driver don't need to
compare them.

Fixes: d6a3627e311c ("RDMA/hns: Optimize wqe buffer set flow for post send")
Signed-off-by: Weihang Li <liweihang@huawei.com>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 9 ---------
 1 file changed, 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 3895a2a..bd09df4 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -433,8 +433,6 @@  static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	unsigned int curr_idx = *sge_idx;
 	int valid_num_sge;
 	u32 msg_len = 0;
-	bool loopback;
-	u8 *smac;
 	int ret;
 
 	valid_num_sge = calc_wr_sge_num(wr, &msg_len);
@@ -457,13 +455,6 @@  static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	roce_set_field(ud_sq_wqe->byte_48, V2_UD_SEND_WQE_BYTE_48_DMAC_5_M,
 		       V2_UD_SEND_WQE_BYTE_48_DMAC_5_S, ah->av.mac[5]);
 
-	/* MAC loopback */
-	smac = (u8 *)hr_dev->dev_addr[qp->port];
-	loopback = ether_addr_equal_unaligned(ah->av.mac, smac) ? 1 : 0;
-
-	roce_set_bit(ud_sq_wqe->byte_40,
-		     V2_UD_SEND_WQE_BYTE_40_LBI_S, loopback);
-
 	ud_sq_wqe->msg_len = cpu_to_le32(msg_len);
 
 	/* Set sig attr */