new file mode 100644
@@ -0,0 +1,1580 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+
+#include "qib.h"
+#include "qib_common.h"
+
+/*
+ * min buffers we want to have per context, after driver
+ */
+#define QIB_MIN_USER_CTXT_BUFCNT 7
+
+#define QLOGIC_IB_R_SOFTWARE_MASK 0xFF
+#define QLOGIC_IB_R_SOFTWARE_SHIFT 24
+#define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62)
+
+/*
+ * Number of ctxts we are configured to use (to allow for more pio
+ * buffers per ctxt, etc.) Zero means use chip value.
+ */
+ushort qib_cfgctxts;
+module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO);
+MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use");
+
+/*
+ * If set, do not write to any regs if avoidable, hack to allow
+ * check for deranged default register values.
+ */
+ushort qib_mini_init;
+module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO);
+MODULE_PARM_DESC(mini_init, "If set, do minimal diag init");
+
+unsigned qib_n_krcv_queues;
+module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO);
+MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port");
+
+/*
+ * qib_wc_pat parameter:
+ * 0 is WC via MTRR
+ * 1 is WC via PAT
+ * If PAT initialization fails, code reverts back to MTRR
+ */
+unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */
+module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO);
+MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism");
+
+struct workqueue_struct *qib_wq;
+struct workqueue_struct *qib_cq_wq;
+
+static void verify_interrupt(unsigned long);
+
+static struct idr qib_unit_table;
+u32 qib_cpulist_count;
+unsigned long *qib_cpulist;
+
+/* set number of contexts we'll actually use */
+void qib_set_ctxtcnt(struct qib_devdata *dd)
+{
+ if (!qib_cfgctxts)
+ dd->cfgctxts = dd->ctxtcnt;
+ else if (qib_cfgctxts < dd->num_pports)
+ dd->cfgctxts = dd->ctxtcnt;
+ else if (qib_cfgctxts <= dd->ctxtcnt)
+ dd->cfgctxts = qib_cfgctxts;
+ else
+ dd->cfgctxts = dd->ctxtcnt;
+}
+
+/*
+ * Common code for creating the receive context array.
+ */
+int qib_create_ctxts(struct qib_devdata *dd)
+{
+ unsigned i;
+ int ret;
+
+ /*
+ * Allocate full ctxtcnt array, rather than just cfgctxts, because
+ * cleanup iterates across all possible ctxts.
+ */
+ dd->rcd = kzalloc(sizeof(*dd->rcd) * dd->ctxtcnt, GFP_KERNEL);
+ if (!dd->rcd) {
+ qib_dev_err(dd, "Unable to allocate ctxtdata array, "
+ "failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ /* create (one or more) kctxt */
+ for (i = 0; i < dd->first_user_ctxt; ++i) {
+ struct qib_pportdata *ppd;
+ struct qib_ctxtdata *rcd;
+
+ if (dd->skip_kctxt_mask & (1 << i))
+ continue;
+
+ ppd = dd->pport + (i % dd->num_pports);
+ rcd = qib_create_ctxtdata(ppd, i);
+ if (!rcd) {
+ qib_dev_err(dd, "Unable to allocate ctxtdata"
+ " for Kernel ctxt, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ rcd->pkeys[0] = QIB_DEFAULT_P_KEY;
+ rcd->seq_cnt = 1;
+ }
+ ret = 0;
+done:
+ return ret;
+}
+
+/*
+ * Common code for user and kernel context setup.
+ */
+struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt)
+{
+ struct qib_devdata *dd = ppd->dd;
+ struct qib_ctxtdata *rcd;
+
+ rcd = kzalloc(sizeof(*rcd), GFP_KERNEL);
+ if (rcd) {
+ INIT_LIST_HEAD(&rcd->qp_wait_list);
+ rcd->ppd = ppd;
+ rcd->dd = dd;
+ rcd->cnt = 1;
+ rcd->ctxt = ctxt;
+ dd->rcd[ctxt] = rcd;
+
+ dd->f_init_ctxt(rcd);
+
+ /*
+ * To avoid wasting a lot of memory, we allocate 32KB chunks
+ * of physically contiguous memory, advance through it until
+ * used up and then allocate more. Of course, we need
+ * memory to store those extra pointers, now. 32KB seems to
+ * be the most that is "safe" under memory pressure
+ * (creating large files and then copying them over
+ * NFS while doing lots of MPI jobs). The OOM killer can
+ * get invoked, even though we say we can sleep and this can
+ * cause significant system problems....
+ */
+ rcd->rcvegrbuf_size = 0x8000;
+ rcd->rcvegrbufs_perchunk =
+ rcd->rcvegrbuf_size / dd->rcvegrbufsize;
+ rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt +
+ rcd->rcvegrbufs_perchunk - 1) /
+ rcd->rcvegrbufs_perchunk;
+ }
+ return rcd;
+}
+
+/*
+ * Common code for initializing the physical port structure.
+ */
+void qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd,
+ u8 hw_pidx, u8 port)
+{
+ ppd->dd = dd;
+ ppd->hw_pidx = hw_pidx;
+ ppd->port = port; /* IB port number, not index */
+
+ spin_lock_init(&ppd->sdma_lock);
+ spin_lock_init(&ppd->lflags_lock);
+ init_waitqueue_head(&ppd->state_wait);
+
+ init_timer(&ppd->symerr_clear_timer);
+ ppd->symerr_clear_timer.function = qib_clear_symerror_on_linkup;
+ ppd->symerr_clear_timer.data = (unsigned long)ppd;
+}
+
+static int init_pioavailregs(struct qib_devdata *dd)
+{
+ int ret, pidx;
+ u64 *status_page;
+
+ dd->pioavailregs_dma = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys,
+ GFP_KERNEL);
+ if (!dd->pioavailregs_dma) {
+ qib_dev_err(dd, "failed to allocate PIOavail reg area "
+ "in memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ /*
+ * We really want L2 cache aligned, but for current CPUs of
+ * interest, they are the same.
+ */
+ status_page = (u64 *)
+ ((char *) dd->pioavailregs_dma +
+ ((2 * L1_CACHE_BYTES +
+ dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
+ /* device status comes first, for backwards compatibility */
+ dd->devstatusp = status_page;
+ *status_page++ = 0;
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ dd->pport[pidx].statusp = status_page;
+ *status_page++ = 0;
+ }
+
+ /*
+ * Setup buffer to hold freeze and other messages, accessible to
+ * apps, following statusp. This is per-unit, not per port.
+ */
+ dd->freezemsg = (char *) status_page;
+ *dd->freezemsg = 0;
+ /* length of msg buffer is "whatever is left" */
+ ret = (char *) status_page - (char *) dd->pioavailregs_dma;
+ dd->freezelen = PAGE_SIZE - ret;
+
+ ret = 0;
+
+done:
+ return ret;
+}
+
+/**
+ * init_shadow_tids - allocate the shadow TID array
+ * @dd: the qlogic_ib device
+ *
+ * allocate the shadow TID array, so we can qib_munlock previous
+ * entries. It may make more sense to move the pageshadow to the
+ * ctxt data structure, so we only allocate memory for ctxts actually
+ * in use, since we at 8k per ctxt, now.
+ * We don't want failures here to prevent use of the driver/chip,
+ * so no return value.
+ */
+static void init_shadow_tids(struct qib_devdata *dd)
+{
+ struct page **pages;
+ dma_addr_t *addrs;
+
+ pages = vmalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *));
+ if (!pages) {
+ qib_dev_err(dd, "failed to allocate shadow page * "
+ "array, no expected sends!\n");
+ goto bail;
+ }
+
+ addrs = vmalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t));
+ if (!addrs) {
+ qib_dev_err(dd, "failed to allocate shadow dma handle "
+ "array, no expected sends!\n");
+ goto bail_free;
+ }
+
+ memset(pages, 0, dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *));
+ memset(addrs, 0, dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t));
+
+ dd->pageshadow = pages;
+ dd->physshadow = addrs;
+ return;
+
+bail_free:
+ vfree(pages);
+bail:
+ dd->pageshadow = NULL;
+}
+
+/*
+ * Do initialization for device that is only needed on
+ * first detect, not on resets.
+ */
+static int loadtime_init(struct qib_devdata *dd)
+{
+ int ret = 0;
+
+ if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) &
+ QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) {
+ qib_dev_err(dd, "Driver only handles version %d, "
+ "chip swversion is %d (%llx), failng\n",
+ QIB_CHIP_SWVERSION,
+ (int)(dd->revision >>
+ QLOGIC_IB_R_SOFTWARE_SHIFT) &
+ QLOGIC_IB_R_SOFTWARE_MASK,
+ (unsigned long long) dd->revision);
+ ret = -ENOSYS;
+ goto done;
+ }
+
+ if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK)
+ qib_devinfo(dd->pcidev, "%s", dd->boardversion);
+
+ spin_lock_init(&dd->pioavail_lock);
+ spin_lock_init(&dd->sendctrl_lock);
+ spin_lock_init(&dd->uctxt_lock);
+ spin_lock_init(&dd->qib_diag_trans_lock);
+ spin_lock_init(&dd->eep_st_lock);
+ mutex_init(&dd->eep_lock);
+
+ if (qib_mini_init)
+ goto done;
+
+ ret = init_pioavailregs(dd);
+ init_shadow_tids(dd);
+
+ qib_get_eeprom_info(dd);
+
+ /* setup time (don't start yet) to verify we got interrupt */
+ init_timer(&dd->intrchk_timer);
+ dd->intrchk_timer.function = verify_interrupt;
+ dd->intrchk_timer.data = (unsigned long) dd;
+
+done:
+ return ret;
+}
+
+/**
+ * init_after_reset - re-initialize after a reset
+ * @dd: the qlogic_ib device
+ *
+ * sanity check at least some of the values after reset, and
+ * ensure no receive or transmit (explictly, in case reset
+ * failed
+ */
+static int init_after_reset(struct qib_devdata *dd)
+{
+ int i;
+
+ /*
+ * Ensure chip does no sends or receives, tail updates, or
+ * pioavail updates while we re-initialize. This is mostly
+ * for the driver data structures, not chip registers.
+ */
+ for (i = 0; i < dd->num_pports; ++i) {
+ /*
+ * ctxt == -1 means "all contexts". Only really safe for
+ * _dis_abling things, as here.
+ */
+ dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS |
+ QIB_RCVCTRL_INTRAVAIL_DIS |
+ QIB_RCVCTRL_TAILUPD_DIS, -1);
+ /* Redundant across ports for some, but no big deal. */
+ dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS |
+ QIB_SENDCTRL_AVAIL_DIS);
+ }
+
+ return 0;
+}
+
+static void enable_chip(struct qib_devdata *dd)
+{
+ u64 rcvmask;
+ int i;
+
+ /*
+ * Enable PIO send, and update of PIOavail regs to memory.
+ */
+ for (i = 0; i < dd->num_pports; ++i)
+ dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB |
+ QIB_SENDCTRL_AVAIL_ENB);
+ /*
+ * Enable kernel ctxts' receive and receive interrupt.
+ * Other ctxts done as user opens and inits them.
+ */
+ rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB;
+ rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ?
+ QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB;
+ for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
+ struct qib_ctxtdata *rcd = dd->rcd[i];
+
+ if (rcd)
+ dd->f_rcvctrl(rcd->ppd, rcvmask, i);
+ }
+}
+
+static void verify_interrupt(unsigned long opaque)
+{
+ struct qib_devdata *dd = (struct qib_devdata *) opaque;
+
+ if (!dd)
+ return; /* being torn down */
+
+ /*
+ * If we don't have a lid or any interrupts, let the user know and
+ * don't bother checking again.
+ */
+ if (dd->int_counter == 0) {
+ if (!dd->f_intr_fallback(dd))
+ dev_err(&dd->pcidev->dev, "No interrupts detected, "
+ "not usable.\n");
+ else /* re-arm the timer to see if fallback works */
+ mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
+ }
+}
+
+static void init_piobuf_state(struct qib_devdata *dd)
+{
+ int i, pidx;
+ u32 uctxts;
+
+ /*
+ * Ensure all buffers are free, and fifos empty. Buffers
+ * are common, so only do once for port 0.
+ *
+ * After enable and qib_chg_pioavailkernel so we can safely
+ * enable pioavail updates and PIOENABLE. After this, packets
+ * are ready and able to go out.
+ */
+ dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH);
+
+ /*
+ * If not all sendbufs are used, add the one to each of the lower
+ * numbered contexts. pbufsctxt and lastctxt_piobuf are
+ * calculated in chip-specific code because it may cause some
+ * chip-specific adjustments to be made.
+ */
+ uctxts = dd->cfgctxts - dd->first_user_ctxt;
+ dd->ctxts_extrabuf = dd->pbufsctxt ?
+ dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0;
+
+ /*
+ * Set up the shadow copies of the piobufavail registers,
+ * which we compare against the chip registers for now, and
+ * the in memory DMA'ed copies of the registers.
+ * By now pioavail updates to memory should have occurred, so
+ * copy them into our working/shadow registers; this is in
+ * case something went wrong with abort, but mostly to get the
+ * initial values of the generation bit correct.
+ */
+ for (i = 0; i < dd->pioavregs; i++) {
+ __le64 tmp;
+
+ tmp = dd->pioavailregs_dma[i];
+ /*
+ * Don't need to worry about pioavailkernel here
+ * because we will call qib_chg_pioavailkernel() later
+ * in initialization, to busy out buffers as needed.
+ */
+ dd->pioavailshadow[i] = le64_to_cpu(tmp);
+ }
+ while (i < ARRAY_SIZE(dd->pioavailshadow))
+ dd->pioavailshadow[i++] = 0; /* for debugging sanity */
+
+ /* after pioavailshadow is setup */
+ qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k,
+ TXCHK_CHG_TYPE_KERN, NULL);
+ dd->f_initvl15_bufs(dd);
+}
+
+/**
+ * qib_init - do the actual initialization sequence on the chip
+ * @dd: the qlogic_ib device
+ * @reinit: reinitializing, so don't allocate new memory
+ *
+ * Do the actual initialization sequence on the chip. This is done
+ * both from the init routine called from the PCI infrastructure, and
+ * when we reset the chip, or detect that it was reset internally,
+ * or it's administratively re-enabled.
+ *
+ * Memory allocation here and in called routines is only done in
+ * the first case (reinit == 0). We have to be careful, because even
+ * without memory allocation, we need to re-write all the chip registers
+ * TIDs, etc. after the reset or enable has completed.
+ */
+int qib_init(struct qib_devdata *dd, int reinit)
+{
+ int ret = 0, pidx, lastfail = 0;
+ u32 portok = 0;
+ unsigned i;
+ struct qib_ctxtdata *rcd;
+ struct qib_pportdata *ppd;
+ unsigned long flags;
+
+ /* Set linkstate to unknown, so we can watch for a transition. */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED |
+ QIBL_LINKDOWN | QIBL_LINKINIT |
+ QIBL_LINKV);
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+
+ if (reinit)
+ ret = init_after_reset(dd);
+ else
+ ret = loadtime_init(dd);
+ if (ret)
+ goto done;
+
+ /* Bypass most chip-init, to get to device creation */
+ if (qib_mini_init)
+ return 0;
+
+ ret = dd->f_late_initreg(dd);
+ if (ret)
+ goto done;
+
+ /* dd->rcd can be NULL if early init failed */
+ for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
+ /*
+ * Set up the (kernel) rcvhdr queue and egr TIDs. If doing
+ * re-init, the simplest way to handle this is to free
+ * existing, and re-allocate.
+ * Need to re-create rest of ctxt 0 ctxtdata as well.
+ */
+ rcd = dd->rcd[i];
+ if (!rcd)
+ continue;
+
+ lastfail = qib_create_rcvhdrq(dd, rcd);
+ if (!lastfail)
+ lastfail = qib_setup_eagerbufs(rcd);
+ if (lastfail) {
+ qib_dev_err(dd, "failed to allocate kernel ctxt's "
+ "rcvhdrq and/or egr bufs\n");
+ continue;
+ }
+ }
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ int mtu;
+ if (lastfail)
+ ret = lastfail;
+ ppd = dd->pport + pidx;
+ mtu = ib_mtu_enum_to_int(qib_ibmtu);
+ if (mtu == -1) {
+ mtu = QIB_DEFAULT_MTU;
+ qib_ibmtu = 0; /* don't leave invalid value */
+ }
+ /* set max we can ever have for this driver load */
+ ppd->init_ibmaxlen = min(mtu > 2048 ?
+ dd->piosize4k : dd->piosize2k,
+ dd->rcvegrbufsize +
+ (dd->rcvhdrentsize << 2));
+ /*
+ * Have to initialize ibmaxlen, but this will normally
+ * change immediately in qib_set_mtu().
+ */
+ ppd->ibmaxlen = ppd->init_ibmaxlen;
+ qib_set_mtu(ppd, mtu);
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+
+ lastfail = dd->f_bringup_serdes(ppd);
+ if (lastfail) {
+ qib_devinfo(dd->pcidev,
+ "Failed to bringup IB port %u\n", ppd->port);
+ lastfail = -ENETDOWN;
+ continue;
+ }
+
+ /* let link come up, and enable IBC */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ portok++;
+ }
+
+ if (!portok) {
+ /* none of the ports initialized */
+ if (!ret && lastfail)
+ ret = lastfail;
+ else if (!ret)
+ ret = -ENETDOWN;
+ /* but continue on, so we can debug cause */
+ }
+
+ enable_chip(dd);
+
+ init_piobuf_state(dd);
+
+done:
+ if (!ret) {
+ /* chip is OK for user apps; mark it as initialized */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ /*
+ * Set status even if port serdes is not initialized
+ * so that diags will work.
+ */
+ *ppd->statusp |= QIB_STATUS_CHIP_PRESENT |
+ QIB_STATUS_INITTED;
+ if (!ppd->link_speed_enabled)
+ continue;
+ if (dd->flags & QIB_HAS_SEND_DMA)
+ ret = qib_setup_sdma(ppd);
+ init_timer(&ppd->hol_timer);
+ ppd->hol_timer.function = qib_hol_event;
+ ppd->hol_timer.data = (unsigned long)ppd;
+ ppd->hol_state = QIB_HOL_UP;
+ }
+
+ /* now we can enable all interrupts from the chip */
+ dd->f_set_intr_state(dd, 1);
+
+ /*
+ * Setup to verify we get an interrupt, and fallback
+ * to an alternate if necessary and possible.
+ */
+ mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
+ /* start stats retrieval timer */
+ mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
+ }
+
+ /* if ret is non-zero, we probably should do some cleanup here... */
+ return ret;
+}
+
+/*
+ * These next two routines are placeholders in case we don't have per-arch
+ * code for controlling write combining. If explicit control of write
+ * combining is not available, performance will probably be awful.
+ */
+
+int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd)
+{
+ return -EOPNOTSUPP;
+}
+
+void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd)
+{
+}
+
+static inline struct qib_devdata *__qib_lookup(int unit)
+{
+ return idr_find(&qib_unit_table, unit);
+}
+
+struct qib_devdata *qib_lookup(int unit)
+{
+ struct qib_devdata *dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qib_devs_lock, flags);
+ dd = __qib_lookup(unit);
+ spin_unlock_irqrestore(&qib_devs_lock, flags);
+
+ return dd;
+}
+
+/*
+ * Stop the timers during unit shutdown, or after an error late
+ * in initialization.
+ */
+static void qib_stop_timers(struct qib_devdata *dd)
+{
+ struct qib_pportdata *ppd;
+ int pidx;
+
+ if (dd->stats_timer.data) {
+ del_timer_sync(&dd->stats_timer);
+ dd->stats_timer.data = 0;
+ }
+ if (dd->intrchk_timer.data) {
+ del_timer_sync(&dd->intrchk_timer);
+ dd->intrchk_timer.data = 0;
+ }
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ if (ppd->hol_timer.data)
+ del_timer_sync(&ppd->hol_timer);
+ if (ppd->led_override_timer.data) {
+ del_timer_sync(&ppd->led_override_timer);
+ atomic_set(&ppd->led_override_timer_active, 0);
+ }
+ if (ppd->symerr_clear_timer.data)
+ del_timer_sync(&ppd->symerr_clear_timer);
+ }
+}
+
+/**
+ * qib_shutdown_device - shut down a device
+ * @dd: the qlogic_ib device
+ *
+ * This is called to make the device quiet when we are about to
+ * unload the driver, and also when the device is administratively
+ * disabled. It does not free any data structures.
+ * Everything it does has to be setup again by qib_init(dd, 1)
+ */
+static void qib_shutdown_device(struct qib_devdata *dd)
+{
+ struct qib_pportdata *ppd;
+ unsigned pidx;
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+
+ spin_lock_irq(&ppd->lflags_lock);
+ ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT |
+ QIBL_LINKARMED | QIBL_LINKACTIVE |
+ QIBL_LINKV);
+ spin_unlock_irq(&ppd->lflags_lock);
+ *ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY);
+ }
+ dd->flags &= ~QIB_INITTED;
+
+ /* mask interrupts, but not errors */
+ dd->f_set_intr_state(dd, 0);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS |
+ QIB_RCVCTRL_CTXT_DIS |
+ QIB_RCVCTRL_INTRAVAIL_DIS |
+ QIB_RCVCTRL_PKEY_ENB, -1);
+ /*
+ * Gracefully stop all sends allowing any in progress to
+ * trickle out first.
+ */
+ dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR);
+ }
+
+ /*
+ * Enough for anything that's going to trickle out to have actually
+ * done so.
+ */
+ udelay(20);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ dd->f_setextled(ppd, 0); /* make sure LEDs are off */
+
+ if (dd->flags & QIB_HAS_SEND_DMA)
+ qib_teardown_sdma(ppd);
+
+ dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS |
+ QIB_SENDCTRL_SEND_DIS);
+ /*
+ * Clear SerdesEnable.
+ * We can't count on interrupts since we are stopping.
+ */
+ dd->f_quiet_serdes(ppd);
+ }
+
+ qib_update_eeprom_log(dd);
+}
+
+/**
+ * qib_free_ctxtdata - free a context's allocated data
+ * @dd: the qlogic_ib device
+ * @rcd: the ctxtdata structure
+ *
+ * free up any allocated data for a context
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of context data, because it is called after qib_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ */
+void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
+{
+ if (!rcd)
+ return;
+
+ if (rcd->rcvhdrq) {
+ dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size,
+ rcd->rcvhdrq, rcd->rcvhdrq_phys);
+ rcd->rcvhdrq = NULL;
+ if (rcd->rcvhdrtail_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ rcd->rcvhdrtail_kvaddr,
+ rcd->rcvhdrqtailaddr_phys);
+ rcd->rcvhdrtail_kvaddr = NULL;
+ }
+ }
+ if (rcd->rcvegrbuf) {
+ unsigned e;
+
+ for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
+ void *base = rcd->rcvegrbuf[e];
+ size_t size = rcd->rcvegrbuf_size;
+
+ dma_free_coherent(&dd->pcidev->dev, size,
+ base, rcd->rcvegrbuf_phys[e]);
+ }
+ kfree(rcd->rcvegrbuf);
+ rcd->rcvegrbuf = NULL;
+ kfree(rcd->rcvegrbuf_phys);
+ rcd->rcvegrbuf_phys = NULL;
+ rcd->rcvegrbuf_chunks = 0;
+ }
+
+ kfree(rcd->tid_pg_list);
+ vfree(rcd->user_event_mask);
+ vfree(rcd->subctxt_uregbase);
+ vfree(rcd->subctxt_rcvegrbuf);
+ vfree(rcd->subctxt_rcvhdr_base);
+ kfree(rcd);
+}
+
+/*
+ * Perform a PIO buffer bandwidth write test, to verify proper system
+ * configuration. Even when all the setup calls work, occasionally
+ * BIOS or other issues can prevent write combining from working, or
+ * can cause other bandwidth problems to the chip.
+ *
+ * This test simply writes the same buffer over and over again, and
+ * measures close to the peak bandwidth to the chip (not testing
+ * data bandwidth to the wire). On chips that use an address-based
+ * trigger to send packets to the wire, this is easy. On chips that
+ * use a count to trigger, we want to make sure that the packet doesn't
+ * go out on the wire, or trigger flow control checks.
+ */
+static void qib_verify_pioperf(struct qib_devdata *dd)
+{
+ u32 pbnum, cnt, lcnt;
+ u32 __iomem *piobuf;
+ u32 *addr;
+ u64 msecs, emsecs;
+
+ piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum);
+ if (!piobuf) {
+ qib_devinfo(dd->pcidev,
+ "No PIObufs for checking perf, skipping\n");
+ return;
+ }
+
+ /*
+ * Enough to give us a reasonable test, less than piobuf size, and
+ * likely multiple of store buffer length.
+ */
+ cnt = 1024;
+
+ addr = vmalloc(cnt);
+ if (!addr) {
+ qib_devinfo(dd->pcidev,
+ "Couldn't get memory for checking PIO perf,"
+ " skipping\n");
+ goto done;
+ }
+
+ preempt_disable(); /* we want reasonably accurate elapsed time */
+ msecs = 1 + jiffies_to_msecs(jiffies);
+ for (lcnt = 0; lcnt < 10000U; lcnt++) {
+ /* wait until we cross msec boundary */
+ if (jiffies_to_msecs(jiffies) >= msecs)
+ break;
+ udelay(1);
+ }
+
+ dd->f_set_armlaunch(dd, 0);
+
+ /*
+ * length 0, no dwords actually sent
+ */
+ writeq(0, piobuf);
+ qib_flush_wc();
+
+ /*
+ * This is only roughly accurate, since even with preempt we
+ * still take interrupts that could take a while. Running for
+ * >= 5 msec seems to get us "close enough" to accurate values.
+ */
+ msecs = jiffies_to_msecs(jiffies);
+ for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
+ qib_pio_copy(piobuf + 64, addr, cnt >> 2);
+ emsecs = jiffies_to_msecs(jiffies) - msecs;
+ }
+
+ /* 1 GiB/sec, slightly over IB SDR line rate */
+ if (lcnt < (emsecs * 1024U))
+ qib_dev_err(dd,
+ "Performance problem: bandwidth to PIO buffers is "
+ "only %u MiB/sec\n",
+ lcnt / (u32) emsecs);
+
+ preempt_enable();
+
+ vfree(addr);
+
+done:
+ /* disarm piobuf, so it's available again */
+ dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum));
+ qib_sendbuf_done(dd, pbnum);
+ dd->f_set_armlaunch(dd, 1);
+}
+
+
+void qib_free_devdata(struct qib_devdata *dd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&qib_devs_lock, flags);
+ idr_remove(&qib_unit_table, dd->unit);
+ list_del(&dd->list);
+ spin_unlock_irqrestore(&qib_devs_lock, flags);
+
+ ib_dealloc_device(&dd->verbs_dev.ibdev);
+}
+
+/*
+ * Allocate our primary per-unit data structure. Must be done via verbs
+ * allocator, because the verbs cleanup process both does cleanup and
+ * free of the data structure.
+ * "extra" is for chip-specific data.
+ *
+ * Use the idr mechanism to get a unit number for this unit.
+ */
+struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra)
+{
+ unsigned long flags;
+ struct qib_devdata *dd;
+ int ret;
+
+ if (!idr_pre_get(&qib_unit_table, GFP_KERNEL)) {
+ dd = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ dd = (struct qib_devdata *) ib_alloc_device(sizeof(*dd) + extra);
+ if (!dd) {
+ dd = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ spin_lock_irqsave(&qib_devs_lock, flags);
+ ret = idr_get_new(&qib_unit_table, dd, &dd->unit);
+ if (ret >= 0)
+ list_add(&dd->list, &qib_dev_list);
+ spin_unlock_irqrestore(&qib_devs_lock, flags);
+
+ if (ret < 0) {
+ qib_early_err(&pdev->dev,
+ "Could not allocate unit ID: error %d\n", -ret);
+ ib_dealloc_device(&dd->verbs_dev.ibdev);
+ dd = ERR_PTR(ret);
+ goto bail;
+ }
+
+ if (!qib_cpulist_count) {
+ u32 count = num_online_cpus();
+ qib_cpulist = kzalloc(BITS_TO_LONGS(count) *
+ sizeof(long), GFP_KERNEL);
+ if (qib_cpulist)
+ qib_cpulist_count = count;
+ else
+ qib_early_err(&pdev->dev, "Could not alloc cpulist "
+ "info, cpu affinity might be wrong\n");
+ }
+
+bail:
+ return dd;
+}
+
+/*
+ * Called from freeze mode handlers, and from PCI error
+ * reporting code. Should be paranoid about state of
+ * system and data structures.
+ */
+void qib_disable_after_error(struct qib_devdata *dd)
+{
+ if (dd->flags & QIB_INITTED) {
+ u32 pidx;
+
+ dd->flags &= ~QIB_INITTED;
+ if (dd->pport)
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ struct qib_pportdata *ppd;
+
+ ppd = dd->pport + pidx;
+ if (dd->flags & QIB_PRESENT) {
+ qib_set_linkstate(ppd,
+ QIB_IB_LINKDOWN_DISABLE);
+ dd->f_setextled(ppd, 0);
+ }
+ *ppd->statusp &= ~QIB_STATUS_IB_READY;
+ }
+ }
+
+ /*
+ * Mark as having had an error for driver, and also
+ * for /sys and status word mapped to user programs.
+ * This marks unit as not usable, until reset.
+ */
+ if (dd->devstatusp)
+ *dd->devstatusp |= QIB_STATUS_HWERROR;
+}
+
+static void __devexit qib_remove_one(struct pci_dev *);
+static int __devinit qib_init_one(struct pci_dev *,
+ const struct pci_device_id *);
+
+#define DRIVER_LOAD_MSG "QLogic " QIB_DRV_NAME " loaded: "
+#define PFX QIB_DRV_NAME ": "
+
+static const struct pci_device_id qib_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, qib_pci_tbl);
+
+struct pci_driver qib_driver = {
+ .name = QIB_DRV_NAME,
+ .probe = qib_init_one,
+ .remove = __devexit_p(qib_remove_one),
+ .id_table = qib_pci_tbl,
+ .err_handler = &qib_pci_err_handler,
+};
+
+/*
+ * Do all the generic driver unit- and chip-independent memory
+ * allocation and initialization.
+ */
+static int __init qlogic_ib_init(void)
+{
+ int ret;
+
+ ret = qib_dev_init();
+ if (ret)
+ goto bail;
+
+ /*
+ * We create our own workqueue mainly because we want to be
+ * able to flush it when devices are being removed. We can't
+ * use schedule_work()/flush_scheduled_work() because both
+ * unregister_netdev() and linkwatch_event take the rtnl lock,
+ * so flush_scheduled_work() can deadlock during device
+ * removal.
+ */
+ qib_wq = create_workqueue("qib");
+ if (!qib_wq) {
+ ret = -ENOMEM;
+ goto bail_dev;
+ }
+
+ qib_cq_wq = create_workqueue("qib_cq");
+ if (!qib_cq_wq) {
+ ret = -ENOMEM;
+ goto bail_wq;
+ }
+
+ /*
+ * These must be called before the driver is registered with
+ * the PCI subsystem.
+ */
+ idr_init(&qib_unit_table);
+ if (!idr_pre_get(&qib_unit_table, GFP_KERNEL)) {
+ printk(KERN_ERR QIB_DRV_NAME ": idr_pre_get() failed\n");
+ ret = -ENOMEM;
+ goto bail_cq_wq;
+ }
+
+ ret = pci_register_driver(&qib_driver);
+ if (ret < 0) {
+ printk(KERN_ERR QIB_DRV_NAME
+ ": Unable to register driver: error %d\n", -ret);
+ goto bail_unit;
+ }
+
+ /* not fatal if it doesn't work */
+ if (qib_init_qibfs())
+ printk(KERN_ERR QIB_DRV_NAME ": Unable to register ipathfs\n");
+ goto bail; /* all OK */
+
+bail_unit:
+ idr_destroy(&qib_unit_table);
+bail_cq_wq:
+ destroy_workqueue(qib_cq_wq);
+bail_wq:
+ destroy_workqueue(qib_wq);
+bail_dev:
+ qib_dev_cleanup();
+bail:
+ return ret;
+}
+
+module_init(qlogic_ib_init);
+
+/*
+ * Do the non-unit driver cleanup, memory free, etc. at unload.
+ */
+static void __exit qlogic_ib_cleanup(void)
+{
+ int ret;
+
+ ret = qib_exit_qibfs();
+ if (ret)
+ printk(KERN_ERR QIB_DRV_NAME ": "
+ "Unable to cleanup counter filesystem: "
+ "error %d\n", -ret);
+
+ pci_unregister_driver(&qib_driver);
+
+ destroy_workqueue(qib_wq);
+ destroy_workqueue(qib_cq_wq);
+
+ qib_cpulist_count = 0;
+ kfree(qib_cpulist);
+
+ idr_destroy(&qib_unit_table);
+ qib_dev_cleanup();
+}
+
+module_exit(qlogic_ib_cleanup);
+
+/* this can only be called after a successful initialization */
+static void cleanup_device_data(struct qib_devdata *dd)
+{
+ int ctxt;
+ int pidx;
+ struct qib_ctxtdata **tmp;
+ unsigned long flags;
+
+ /* users can't do anything more with chip */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].statusp)
+ *dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT;
+
+ if (!qib_wc_pat)
+ qib_disable_wc(dd);
+
+ if (dd->pioavailregs_dma) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *) dd->pioavailregs_dma,
+ dd->pioavailregs_phys);
+ dd->pioavailregs_dma = NULL;
+ }
+
+ if (dd->pageshadow) {
+ struct page **tmpp = dd->pageshadow;
+ dma_addr_t *tmpd = dd->physshadow;
+ int i, cnt = 0;
+
+ for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) {
+ int ctxt_tidbase = ctxt * dd->rcvtidcnt;
+ int maxtid = ctxt_tidbase + dd->rcvtidcnt;
+
+ for (i = ctxt_tidbase; i < maxtid; i++) {
+ if (!tmpp[i])
+ continue;
+ pci_unmap_page(dd->pcidev, tmpd[i],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ qib_release_user_pages(&tmpp[i], 1);
+ tmpp[i] = NULL;
+ cnt++;
+ }
+ }
+
+ tmpp = dd->pageshadow;
+ dd->pageshadow = NULL;
+ vfree(tmpp);
+ }
+
+ /*
+ * Free any resources still in use (usually just kernel contexts)
+ * at unload; we do for ctxtcnt, because that's what we allocate.
+ * We acquire lock to be really paranoid that rcd isn't being
+ * accessed from some interrupt-related code (that should not happen,
+ * but best to be sure).
+ */
+ spin_lock_irqsave(&dd->uctxt_lock, flags);
+ tmp = dd->rcd;
+ dd->rcd = NULL;
+ spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+ for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) {
+ struct qib_ctxtdata *rcd = tmp[ctxt];
+
+ tmp[ctxt] = NULL; /* debugging paranoia */
+ qib_free_ctxtdata(dd, rcd);
+ }
+ kfree(tmp);
+ kfree(dd->boardname);
+}
+
+/*
+ * Clean up on unit shutdown, or error during unit load after
+ * successful initialization.
+ */
+static void qib_postinit_cleanup(struct qib_devdata *dd)
+{
+ /*
+ * Clean up chip-specific stuff.
+ * We check for NULL here, because it's outside
+ * the kregbase check, and we need to call it
+ * after the free_irq. Thus it's possible that
+ * the function pointers were never initialized.
+ */
+ if (dd->f_cleanup)
+ dd->f_cleanup(dd);
+
+ qib_pcie_ddcleanup(dd);
+
+ cleanup_device_data(dd);
+
+ qib_free_devdata(dd);
+}
+
+static int __devinit qib_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int ret, j, pidx, initfail;
+ struct qib_devdata *dd = NULL;
+
+ ret = qib_pcie_init(pdev, ent);
+ if (ret)
+ goto bail;
+
+ /*
+ * Do device-specific initialiation, function table setup, dd
+ * allocation, etc.
+ */
+ switch (ent->device) {
+ case PCI_DEVICE_ID_QLOGIC_IB_6120:
+ dd = qib_init_iba6120_funcs(pdev, ent);
+ break;
+
+ case PCI_DEVICE_ID_QLOGIC_IB_7220:
+ dd = qib_init_iba7220_funcs(pdev, ent);
+ break;
+
+ case PCI_DEVICE_ID_QLOGIC_IB_7322:
+ dd = qib_init_iba7322_funcs(pdev, ent);
+ break;
+
+ default:
+ qib_early_err(&pdev->dev, "Failing on unknown QLogic "
+ "deviceid 0x%x\n", ent->device);
+ ret = -ENODEV;
+ }
+
+ if (IS_ERR(dd))
+ ret = PTR_ERR(dd);
+ if (ret)
+ goto bail; /* error already printed */
+
+ /* do the generic initialization */
+ initfail = qib_init(dd, 0);
+
+ ret = qib_register_ib_device(dd);
+
+ /*
+ * Now ready for use. this should be cleared whenever we
+ * detect a reset, or initiate one. If earlier failure,
+ * we still create devices, so diags, etc. can be used
+ * to determine cause of problem.
+ */
+ if (!qib_mini_init && !initfail && !ret)
+ dd->flags |= QIB_INITTED;
+
+ j = qib_device_create(dd);
+ if (j)
+ qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j);
+ j = qibfs_add(dd);
+ if (j)
+ qib_dev_err(dd, "Failed filesystem setup for counters: %d\n",
+ -j);
+
+ if (qib_mini_init || initfail || ret) {
+ qib_stop_timers(dd);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ dd->f_quiet_serdes(dd->pport + pidx);
+ if (initfail)
+ ret = initfail;
+ goto bail;
+ }
+
+ if (!qib_wc_pat) {
+ ret = qib_enable_wc(dd);
+ if (ret) {
+ qib_dev_err(dd, "Write combining not enabled "
+ "(err %d): performance may be poor\n",
+ -ret);
+ ret = 0;
+ }
+ }
+
+ qib_verify_pioperf(dd);
+bail:
+ return ret;
+}
+
+static void __devexit qib_remove_one(struct pci_dev *pdev)
+{
+ struct qib_devdata *dd = pci_get_drvdata(pdev);
+ int ret;
+
+ /* unregister from IB core */
+ qib_unregister_ib_device(dd);
+
+ /*
+ * Disable the IB link, disable interrupts on the device,
+ * clear dma engines, etc.
+ */
+ if (!qib_mini_init)
+ qib_shutdown_device(dd);
+
+ qib_stop_timers(dd);
+
+ /* wait until all of our (qsfp) schedule_work() calls complete */
+ flush_scheduled_work();
+
+ ret = qibfs_remove(dd);
+ if (ret)
+ qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n",
+ -ret);
+
+ qib_device_remove(dd);
+
+ qib_postinit_cleanup(dd);
+}
+
+/**
+ * qib_create_rcvhdrq - create a receive header queue
+ * @dd: the qlogic_ib device
+ * @rcd: the context data
+ *
+ * This must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
+ */
+int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
+{
+ unsigned amt;
+
+ if (!rcd->rcvhdrq) {
+ dma_addr_t phys_hdrqtail;
+ gfp_t gfp_flags;
+
+ amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE);
+ gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ?
+ GFP_USER : GFP_KERNEL;
+ rcd->rcvhdrq = dma_alloc_coherent(
+ &dd->pcidev->dev, amt, &rcd->rcvhdrq_phys,
+ gfp_flags | __GFP_COMP);
+
+ if (!rcd->rcvhdrq) {
+ qib_dev_err(dd, "attempt to allocate %d bytes "
+ "for ctxt %u rcvhdrq failed\n",
+ amt, rcd->ctxt);
+ goto bail;
+ }
+
+ if (rcd->ctxt >= dd->first_user_ctxt) {
+ rcd->user_event_mask = vmalloc_user(PAGE_SIZE);
+ if (!rcd->user_event_mask)
+ goto bail_free_hdrq;
+ }
+
+ if (!(dd->flags & QIB_NODMA_RTAIL)) {
+ rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+ gfp_flags);
+ if (!rcd->rcvhdrtail_kvaddr)
+ goto bail_free;
+ rcd->rcvhdrqtailaddr_phys = phys_hdrqtail;
+ }
+
+ rcd->rcvhdrq_size = amt;
+ }
+
+ /* clear for security and sanity on each use */
+ memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size);
+ if (rcd->rcvhdrtail_kvaddr)
+ memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE);
+ return 0;
+
+bail_free:
+ qib_dev_err(dd, "attempt to allocate 1 page for ctxt %u "
+ "rcvhdrqtailaddr failed\n", rcd->ctxt);
+ vfree(rcd->user_event_mask);
+ rcd->user_event_mask = NULL;
+bail_free_hdrq:
+ dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
+ rcd->rcvhdrq_phys);
+ rcd->rcvhdrq = NULL;
+bail:
+ return -ENOMEM;
+}
+
+/**
+ * allocate eager buffers, both kernel and user contexts.
+ * @rcd: the context we are setting up.
+ *
+ * Allocate the eager TID buffers and program them into hip.
+ * They are no longer completely contiguous, we do multiple allocation
+ * calls. Otherwise we get the OOM code involved, by asking for too
+ * much per call, with disastrous results on some kernels.
+ */
+int qib_setup_eagerbufs(struct qib_ctxtdata *rcd)
+{
+ struct qib_devdata *dd = rcd->dd;
+ unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
+ size_t size;
+ gfp_t gfp_flags;
+
+ /*
+ * GFP_USER, but without GFP_FS, so buffer cache can be
+ * coalesced (we hope); otherwise, even at order 4,
+ * heavy filesystem activity makes these fail, and we can
+ * use compound pages.
+ */
+ gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
+
+ egrcnt = rcd->rcvegrcnt;
+ egroff = rcd->rcvegr_tid_base;
+ egrsize = dd->rcvegrbufsize;
+
+ chunk = rcd->rcvegrbuf_chunks;
+ egrperchunk = rcd->rcvegrbufs_perchunk;
+ size = rcd->rcvegrbuf_size;
+ if (!rcd->rcvegrbuf) {
+ rcd->rcvegrbuf =
+ kzalloc(chunk * sizeof(rcd->rcvegrbuf[0]),
+ GFP_KERNEL);
+ if (!rcd->rcvegrbuf)
+ goto bail;
+ }
+ if (!rcd->rcvegrbuf_phys) {
+ rcd->rcvegrbuf_phys =
+ kmalloc(chunk * sizeof(rcd->rcvegrbuf_phys[0]),
+ GFP_KERNEL);
+ if (!rcd->rcvegrbuf_phys)
+ goto bail_rcvegrbuf;
+ }
+ for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
+ if (rcd->rcvegrbuf[e])
+ continue;
+ rcd->rcvegrbuf[e] =
+ dma_alloc_coherent(&dd->pcidev->dev, size,
+ &rcd->rcvegrbuf_phys[e],
+ gfp_flags);
+ if (!rcd->rcvegrbuf[e])
+ goto bail_rcvegrbuf_phys;
+ }
+
+ rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0];
+
+ for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) {
+ dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
+ unsigned i;
+
+ for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
+ dd->f_put_tid(dd, e + egroff +
+ (u64 __iomem *)
+ ((char __iomem *)
+ dd->kregbase +
+ dd->rcvegrbase),
+ RCVHQ_RCV_TYPE_EAGER, pa);
+ pa += egrsize;
+ }
+ cond_resched(); /* don't hog the cpu */
+ }
+
+ return 0;
+
+bail_rcvegrbuf_phys:
+ for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++)
+ dma_free_coherent(&dd->pcidev->dev, size,
+ rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]);
+ kfree(rcd->rcvegrbuf_phys);
+ rcd->rcvegrbuf_phys = NULL;
+bail_rcvegrbuf:
+ kfree(rcd->rcvegrbuf);
+ rcd->rcvegrbuf = NULL;
+bail:
+ return -ENOMEM;
+}
+
+int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
+{
+ u64 __iomem *qib_kregbase = NULL;
+ void __iomem *qib_piobase = NULL;
+ u64 __iomem *qib_userbase = NULL;
+ u64 qib_kreglen;
+ u64 qib_pio2koffset = dd->piobufbase & 0xffffffff;
+ u64 qib_pio4koffset = dd->piobufbase >> 32;
+ u64 qib_pio2klen = dd->piobcnt2k * dd->palign;
+ u64 qib_pio4klen = dd->piobcnt4k * dd->align4k;
+ u64 qib_physaddr = dd->physaddr;
+ u64 qib_piolen;
+ u64 qib_userlen = 0;
+
+ /*
+ * Free the old mapping because the kernel will try to reuse the
+ * old mapping and not create a new mapping with the
+ * write combining attribute.
+ */
+ iounmap(dd->kregbase);
+ dd->kregbase = NULL;
+
+ /*
+ * Assumes chip address space looks like:
+ * - kregs + sregs + cregs + uregs (in any order)
+ * - piobufs (2K and 4K bufs in either order)
+ * or:
+ * - kregs + sregs + cregs (in any order)
+ * - piobufs (2K and 4K bufs in either order)
+ * - uregs
+ */
+ if (dd->piobcnt4k == 0) {
+ qib_kreglen = qib_pio2koffset;
+ qib_piolen = qib_pio2klen;
+ } else if (qib_pio2koffset < qib_pio4koffset) {
+ qib_kreglen = qib_pio2koffset;
+ qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen;
+ } else {
+ qib_kreglen = qib_pio4koffset;
+ qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen;
+ }
+ qib_piolen += vl15buflen;
+ /* Map just the configured ports (not all hw ports) */
+ if (dd->uregbase > qib_kreglen)
+ qib_userlen = dd->ureg_align * dd->cfgctxts;
+
+ /* Sanity checks passed, now create the new mappings */
+ qib_kregbase = ioremap_nocache(qib_physaddr, qib_kreglen);
+ if (!qib_kregbase)
+ goto bail;
+
+ qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen);
+ if (!qib_piobase)
+ goto bail_kregbase;
+
+ if (qib_userlen) {
+ qib_userbase = ioremap_nocache(qib_physaddr + dd->uregbase,
+ qib_userlen);
+ if (!qib_userbase)
+ goto bail_piobase;
+ }
+
+ dd->kregbase = qib_kregbase;
+ dd->kregend = (u64 __iomem *)
+ ((char __iomem *) qib_kregbase + qib_kreglen);
+ dd->piobase = qib_piobase;
+ dd->pio2kbase = (void __iomem *)
+ (((char __iomem *) dd->piobase) +
+ qib_pio2koffset - qib_kreglen);
+ if (dd->piobcnt4k)
+ dd->pio4kbase = (void __iomem *)
+ (((char __iomem *) dd->piobase) +
+ qib_pio4koffset - qib_kreglen);
+ if (qib_userlen)
+ /* ureg will now be accessed relative to dd->userbase */
+ dd->userbase = qib_userbase;
+ return 0;
+
+bail_piobase:
+ iounmap(qib_piobase);
+bail_kregbase:
+ iounmap(qib_kregbase);
+bail:
+ return -ENOMEM;
+}