new file mode 100644
@@ -0,0 +1,416 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _COMMON_H
+#define _COMMON_H
+
+#include <rdma/hfi/hfi1_user.h>
+
+/*
+ * This file contains defines, structures, etc. that are used
+ * to communicate between kernel and user code.
+ */
+
+/* version of protocol header (known to chip also). In the long run,
+ * we should be able to generate and accept a range of version numbers;
+ * for now we only accept one, and it's compiled in.
+ */
+#define IPS_PROTO_VERSION 2
+
+/*
+ * These are compile time constants that you may want to enable or disable
+ * if you are trying to debug problems with code or performance.
+ * HFI1_VERBOSE_TRACING define as 1 if you want additional tracing in
+ * fast path code
+ * HFI1_TRACE_REGWRITES define as 1 if you want register writes to be
+ * traced in fast path code
+ * _HFI1_TRACING define as 0 if you want to remove all tracing in a
+ * compilation unit
+ */
+
+/*
+ * If a packet's QP[23:16] bits match this value, then it is
+ * a PSM packet and the hardware will expect a KDETH header
+ * following the BTH.
+ */
+#define DEFAULT_KDETH_QP 0x80
+
+/* driver/hw feature set bitmask */
+#define HFI1_CAP_USER_SHIFT 24
+#define HFI1_CAP_MASK ((1UL << HFI1_CAP_USER_SHIFT) - 1)
+/* locked flag - if set, only HFI1_CAP_WRITABLE_MASK bits can be set */
+#define HFI1_CAP_LOCKED_SHIFT 63
+#define HFI1_CAP_LOCKED_MASK 0x1ULL
+#define HFI1_CAP_LOCKED_SMASK (HFI1_CAP_LOCKED_MASK << HFI1_CAP_LOCKED_SHIFT)
+/* extra bits used between kernel and user processes */
+#define HFI1_CAP_MISC_SHIFT (HFI1_CAP_USER_SHIFT * 2)
+#define HFI1_CAP_MISC_MASK ((1ULL << (HFI1_CAP_LOCKED_SHIFT - \
+ HFI1_CAP_MISC_SHIFT)) - 1)
+
+#define HFI1_CAP_KSET(cap) ({ hfi1_cap_mask |= HFI1_CAP_##cap; hfi1_cap_mask; })
+#define HFI1_CAP_KCLEAR(cap) \
+ ({ \
+ hfi1_cap_mask &= ~HFI1_CAP_##cap; \
+ hfi1_cap_mask; \
+ })
+#define HFI1_CAP_USET(cap) \
+ ({ \
+ hfi1_cap_mask |= (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \
+ hfi1_cap_mask; \
+ })
+#define HFI1_CAP_UCLEAR(cap) \
+ ({ \
+ hfi1_cap_mask &= ~(HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT); \
+ hfi1_cap_mask; \
+ })
+#define HFI1_CAP_SET(cap) \
+ ({ \
+ hfi1_cap_mask |= (HFI1_CAP_##cap | (HFI1_CAP_##cap << \
+ HFI1_CAP_USER_SHIFT)); \
+ hfi1_cap_mask; \
+ })
+#define HFI1_CAP_CLEAR(cap) \
+ ({ \
+ hfi1_cap_mask &= ~(HFI1_CAP_##cap | \
+ (HFI1_CAP_##cap << HFI1_CAP_USER_SHIFT)); \
+ hfi1_cap_mask; \
+ })
+#define HFI1_CAP_LOCK() \
+ ({ hfi1_cap_mask |= HFI1_CAP_LOCKED_SMASK; hfi1_cap_mask; })
+#define HFI1_CAP_LOCKED() (!!(hfi1_cap_mask & HFI1_CAP_LOCKED_SMASK))
+/*
+ * The set of capability bits that can be changed after initial load
+ * This set is the same for kernel and user contexts. However, for
+ * user contexts, the set can be further filtered by using the
+ * HFI1_CAP_RESERVED_MASK bits.
+ */
+#define HFI1_CAP_WRITABLE_MASK (HFI1_CAP_ENABLE_SMA | \
+ HFI1_CAP_SDMA_AHG | \
+ HFI1_CAP_HDRSUPP | \
+ HFI1_CAP_MULTI_PKT_EGR | \
+ HFI1_CAP_NODROP_RHQ_FULL | \
+ HFI1_CAP_NODROP_EGR_FULL | \
+ HFI1_CAP_ALLOW_PERM_JKEY | \
+ HFI1_CAP_STATIC_RATE_CTRL | \
+ HFI1_CAP_PRINT_UNIMPL)
+/*
+ * A set of capability bits that are "global" and are not allowed to be
+ * set in the user bitmask.
+ */
+#define HFI1_CAP_RESERVED_MASK ((HFI1_CAP_SDMA | \
+ HFI1_CAP_ENABLE_SMA | \
+ HFI1_CAP_USE_SDMA_HEAD | \
+ HFI1_CAP_EXTENDED_PSN | \
+ HFI1_CAP_PRINT_UNIMPL | \
+ HFI1_CAP_QSFP_ENABLED | \
+ HFI1_CAP_NO_INTEGRITY | \
+ HFI1_CAP_PKEY_CHECK) << \
+ HFI1_CAP_USER_SHIFT)
+/*
+ * Set of capabilities that need to be enabled for kernel context in
+ * order to be allowed for user contexts, as well.
+ */
+#define HFI1_CAP_MUST_HAVE_KERN (HFI1_CAP_STATIC_RATE_CTRL)
+/* Default enabled capabilities (both kernel and user) */
+#define HFI1_CAP_MASK_DEFAULT (HFI1_CAP_HDRSUPP | \
+ HFI1_CAP_NODROP_RHQ_FULL | \
+ HFI1_CAP_NODROP_EGR_FULL | \
+ HFI1_CAP_SDMA | \
+ HFI1_CAP_ENABLE_SMA | \
+ HFI1_CAP_PRINT_UNIMPL | \
+ HFI1_CAP_STATIC_RATE_CTRL | \
+ HFI1_CAP_QSFP_ENABLED | \
+ HFI1_CAP_PKEY_CHECK | \
+ HFI1_CAP_MULTI_PKT_EGR | \
+ HFI1_CAP_EXTENDED_PSN | \
+ ((HFI1_CAP_HDRSUPP | \
+ HFI1_CAP_MULTI_PKT_EGR | \
+ HFI1_CAP_STATIC_RATE_CTRL | \
+ HFI1_CAP_PKEY_CHECK | \
+ HFI1_CAP_EARLY_CREDIT_RETURN) << \
+ HFI1_CAP_USER_SHIFT))
+/*
+ * A bitmask of kernel/global capabilities that should be communicated
+ * to user level processes.
+ */
+#define HFI1_CAP_K2U (HFI1_CAP_SDMA | \
+ HFI1_CAP_EXTENDED_PSN | \
+ HFI1_CAP_PKEY_CHECK | \
+ HFI1_CAP_NO_INTEGRITY)
+
+#define HFI1_USER_SWVERSION ((HFI1_USER_SWMAJOR << 16) | HFI1_USER_SWMINOR)
+
+#ifndef HFI1_KERN_TYPE
+#define HFI1_KERN_TYPE 0
+#endif
+
+/*
+ * Similarly, this is the kernel version going back to the user. It's
+ * slightly different, in that we want to tell if the driver was built as
+ * part of a Intel release, or from the driver from openfabrics.org,
+ * kernel.org, or a standard distribution, for support reasons.
+ * The high bit is 0 for non-Intel and 1 for Intel-built/supplied.
+ *
+ * It's returned by the driver to the user code during initialization in the
+ * spi_sw_version field of hfi1_base_info, so the user code can in turn
+ * check for compatibility with the kernel.
+*/
+#define HFI1_KERN_SWVERSION ((HFI1_KERN_TYPE << 31) | HFI1_USER_SWVERSION)
+
+/*
+ * Define the driver version number. This is something that refers only
+ * to the driver itself, not the software interfaces it supports.
+ */
+#ifndef HFI1_DRIVER_VERSION_BASE
+#define HFI1_DRIVER_VERSION_BASE "0.9-123"
+#endif
+
+/* create the final driver version string */
+#ifdef HFI1_IDSTR
+#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE " " HFI1_IDSTR
+#else
+#define HFI1_DRIVER_VERSION HFI1_DRIVER_VERSION_BASE
+#endif
+
+/*
+ * Diagnostics can send a packet by writing the following
+ * struct to the diag packet special file.
+ *
+ * This allows a custom PBC qword, so that special modes and deliberate
+ * changes to CRCs can be used.
+ */
+#define _DIAG_PKT_VERS 1
+struct diag_pkt {
+ __u16 version; /* structure version */
+ __u16 unit; /* which device */
+ __u16 sw_index; /* send sw index to use */
+ __u16 len; /* data length, in bytes */
+ __u16 port; /* port number */
+ __u16 unused;
+ __u32 flags; /* call flags */
+ __u64 data; /* user data pointer */
+ __u64 pbc; /* PBC for the packet */
+};
+
+/* diag_pkt flags */
+#define F_DIAGPKT_WAIT 0x1 /* wait until packet is sent */
+
+/*
+ * The next set of defines are for packet headers, and chip register
+ * and memory bits that are visible to and/or used by user-mode software.
+ */
+
+/*
+ * Receive Header Flags
+ */
+#define RHF_PKT_LEN_SHIFT 0
+#define RHF_PKT_LEN_MASK 0xfffull
+#define RHF_PKT_LEN_SMASK (RHF_PKT_LEN_MASK << RHF_PKT_LEN_SHIFT)
+
+#define RHF_RCV_TYPE_SHIFT 12
+#define RHF_RCV_TYPE_MASK 0x7ull
+#define RHF_RCV_TYPE_SMASK (RHF_RCV_TYPE_MASK << RHF_RCV_TYPE_SHIFT)
+
+#define RHF_USE_EGR_BFR_SHIFT 15
+#define RHF_USE_EGR_BFR_MASK 0x1ull
+#define RHF_USE_EGR_BFR_SMASK (RHF_USE_EGR_BFR_MASK << RHF_USE_EGR_BFR_SHIFT)
+
+#define RHF_EGR_INDEX_SHIFT 16
+#define RHF_EGR_INDEX_MASK 0x7ffull
+#define RHF_EGR_INDEX_SMASK (RHF_EGR_INDEX_MASK << RHF_EGR_INDEX_SHIFT)
+
+#define RHF_DC_INFO_SHIFT 27
+#define RHF_DC_INFO_MASK 0x1ull
+#define RHF_DC_INFO_SMASK (RHF_DC_INFO_MASK << RHF_DC_INFO_SHIFT)
+
+#define RHF_RCV_SEQ_SHIFT 28
+#define RHF_RCV_SEQ_MASK 0xfull
+#define RHF_RCV_SEQ_SMASK (RHF_RCV_SEQ_MASK << RHF_RCV_SEQ_SHIFT)
+
+#define RHF_EGR_OFFSET_SHIFT 32
+#define RHF_EGR_OFFSET_MASK 0xfffull
+#define RHF_EGR_OFFSET_SMASK (RHF_EGR_OFFSET_MASK << RHF_EGR_OFFSET_SHIFT)
+#define RHF_HDRQ_OFFSET_SHIFT 44
+#define RHF_HDRQ_OFFSET_MASK 0x1ffull
+#define RHF_HDRQ_OFFSET_SMASK (RHF_HDRQ_OFFSET_MASK << RHF_HDRQ_OFFSET_SHIFT)
+#define RHF_K_HDR_LEN_ERR (0x1ull << 53)
+#define RHF_DC_UNC_ERR (0x1ull << 54)
+#define RHF_DC_ERR (0x1ull << 55)
+#define RHF_RCV_TYPE_ERR_SHIFT 56
+#define RHF_RCV_TYPE_ERR_MASK 0x7ul
+#define RHF_RCV_TYPE_ERR_SMASK (RHF_RCV_TYPE_ERR_MASK << RHF_RCV_TYPE_ERR_SHIFT)
+#define RHF_TID_ERR (0x1ull << 59)
+#define RHF_LEN_ERR (0x1ull << 60)
+#define RHF_ECC_ERR (0x1ull << 61)
+#define RHF_VCRC_ERR (0x1ull << 62)
+#define RHF_ICRC_ERR (0x1ull << 63)
+
+#define RHF_ERROR_SMASK 0xffe0000000000000ull /* bits 63:53 */
+
+/* RHF receive types */
+#define RHF_RCV_TYPE_EXPECTED 0
+#define RHF_RCV_TYPE_EAGER 1
+#define RHF_RCV_TYPE_IB 2 /* normal IB, IB Raw, or IPv6 */
+#define RHF_RCV_TYPE_ERROR 3
+#define RHF_RCV_TYPE_BYPASS 4
+#define RHF_RCV_TYPE_INVALID5 5
+#define RHF_RCV_TYPE_INVALID6 6
+#define RHF_RCV_TYPE_INVALID7 7
+
+/* RHF receive type error - expected packet errors */
+#define RHF_RTE_EXPECTED_FLOW_SEQ_ERR 0x2
+#define RHF_RTE_EXPECTED_FLOW_GEN_ERR 0x4
+
+/* RHF receive type error - eager packet errors */
+#define RHF_RTE_EAGER_NO_ERR 0x0
+
+/* RHF receive type error - IB packet errors */
+#define RHF_RTE_IB_NO_ERR 0x0
+
+/* RHF receive type error - error packet errors */
+#define RHF_RTE_ERROR_NO_ERR 0x0
+#define RHF_RTE_ERROR_OP_CODE_ERR 0x1
+#define RHF_RTE_ERROR_KHDR_MIN_LEN_ERR 0x2
+#define RHF_RTE_ERROR_KHDR_HCRC_ERR 0x3
+#define RHF_RTE_ERROR_KHDR_KVER_ERR 0x4
+#define RHF_RTE_ERROR_CONTEXT_ERR 0x5
+#define RHF_RTE_ERROR_KHDR_TID_ERR 0x6
+
+/* RHF receive type error - bypass packet errors */
+#define RHF_RTE_BYPASS_NO_ERR 0x0
+
+/*
+ * This structure contains the first field common to all protocols
+ * that employ this chip.
+ */
+struct hfi1_message_header {
+ __be16 lrh[4];
+};
+
+/* IB - LRH header constants */
+#define HFI1_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
+#define HFI1_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
+
+/* misc. */
+#define SIZE_OF_CRC 1
+
+#define LIM_MGMT_P_KEY 0x7FFF
+#define FULL_MGMT_P_KEY 0xFFFF
+
+#define DEFAULT_P_KEY LIM_MGMT_P_KEY
+#define HFI1_PERMISSIVE_LID 0xFFFF
+#define HFI1_AETH_CREDIT_SHIFT 24
+#define HFI1_AETH_CREDIT_MASK 0x1F
+#define HFI1_AETH_CREDIT_INVAL 0x1F
+#define HFI1_MSN_MASK 0xFFFFFF
+#define HFI1_QPN_MASK 0xFFFFFF
+#define HFI1_FECN_SHIFT 31
+#define HFI1_FECN_MASK 0x1
+#define HFI1_BECN_SHIFT 30
+#define HFI1_BECN_MASK 0x1
+#define HFI1_MULTICAST_LID_BASE 0xC000
+
+static inline __u64 rhf_to_cpu(const __le32 *rbuf)
+{
+ return __le64_to_cpu(*((__le64 *)rbuf));
+}
+
+static inline u64 rhf_err_flags(u64 rhf)
+{
+ return rhf & RHF_ERROR_SMASK;
+}
+
+static inline u32 rhf_rcv_type(u64 rhf)
+{
+ return (rhf >> RHF_RCV_TYPE_SHIFT) & RHF_RCV_TYPE_MASK;
+}
+
+static inline u32 rhf_rcv_type_err(u64 rhf)
+{
+ return (rhf >> RHF_RCV_TYPE_ERR_SHIFT) & RHF_RCV_TYPE_ERR_MASK;
+}
+
+/* return size is in bytes, not DWORDs */
+static inline u32 rhf_pkt_len(u64 rhf)
+{
+ return ((rhf & RHF_PKT_LEN_SMASK) >> RHF_PKT_LEN_SHIFT) << 2;
+}
+
+static inline u32 rhf_egr_index(u64 rhf)
+{
+ return (rhf >> RHF_EGR_INDEX_SHIFT) & RHF_EGR_INDEX_MASK;
+}
+
+static inline u32 rhf_rcv_seq(u64 rhf)
+{
+ return (rhf >> RHF_RCV_SEQ_SHIFT) & RHF_RCV_SEQ_MASK;
+}
+
+/* returned offset is in DWORDS */
+static inline u32 rhf_hdrq_offset(u64 rhf)
+{
+ return (rhf >> RHF_HDRQ_OFFSET_SHIFT) & RHF_HDRQ_OFFSET_MASK;
+}
+
+static inline u64 rhf_use_egr_bfr(u64 rhf)
+{
+ return rhf & RHF_USE_EGR_BFR_SMASK;
+}
+
+static inline u64 rhf_dc_info(u64 rhf)
+{
+ return rhf & RHF_DC_INFO_SMASK;
+}
+
+static inline u32 rhf_egr_buf_offset(u64 rhf)
+{
+ return (rhf >> RHF_EGR_OFFSET_SHIFT) & RHF_EGR_OFFSET_MASK;
+}
+#endif /* _COMMON_H */