new file mode 100644
@@ -0,0 +1,475 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/delay.h>
+#include "hfi.h"
+#include "common.h"
+#include "eprom.h"
+
+/*
+ * The EPROM is logically divided into two partitions:
+ * partition 0: the first 128K, visible from PCI ROM BAR
+ * partition 1: the rest
+ */
+#define P0_SIZE (128 * 1024)
+#define P1_START P0_SIZE
+
+/* largest erase size supported by the controller */
+#define SIZE_32KB (32 * 1024)
+#define MASK_32KB (SIZE_32KB - 1)
+
+/* controller page size, in bytes */
+#define EP_PAGE_SIZE 256
+#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1)
+
+/* controller commands */
+#define CMD_SHIFT 24
+#define CMD_NOP (0)
+#define CMD_PAGE_PROGRAM(addr) ((0x02 << CMD_SHIFT) | addr)
+#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr)
+#define CMD_READ_SR1 ((0x05 << CMD_SHIFT))
+#define CMD_WRITE_ENABLE ((0x06 << CMD_SHIFT))
+#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr)
+#define CMD_CHIP_ERASE ((0x60 << CMD_SHIFT))
+#define CMD_READ_MANUF_DEV_ID ((0x90 << CMD_SHIFT))
+#define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT))
+
+/* controller interface speeds */
+#define EP_SPEED_FULL 0x2 /* full speed */
+
+/* controller status register 1 bits */
+#define SR1_BUSY 0x1ull /* the BUSY bit in SR1 */
+
+/* sleep length while waiting for controller */
+#define WAIT_SLEEP_US 100 /* must be larger than 5 (see usage) */
+#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US))
+
+/* GPIO pins */
+#define EPROM_WP_N (1ull << 14) /* EPROM write line */
+
+/*
+ * Use the EP mutex to guard against other callers from within the driver.
+ * Also covers usage of eprom_available.
+ */
+static DEFINE_MUTEX(eprom_mutex);
+static int eprom_available; /* default: not available */
+
+/*
+ * Turn on external enable line that allows writing on the flash.
+ */
+static void write_enable(struct hfi1_devdata *dd)
+{
+ /* raise signal */
+ write_csr(dd, ASIC_GPIO_OUT,
+ read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N);
+ /* raise enable */
+ write_csr(dd, ASIC_GPIO_OE,
+ read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N);
+}
+
+/*
+ * Turn off external enable line that allows writing on the flash.
+ */
+static void write_disable(struct hfi1_devdata *dd)
+{
+ /* lower signal */
+ write_csr(dd, ASIC_GPIO_OUT,
+ read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N);
+ /* lower enable */
+ write_csr(dd, ASIC_GPIO_OE,
+ read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N);
+}
+
+/*
+ * Wait for the device to become not busy. Must be called after all
+ * write or erase operations.
+ */
+static int wait_for_not_busy(struct hfi1_devdata *dd)
+{
+ unsigned long count = 0;
+ u64 reg;
+ int ret = 0;
+
+ /* starts page mode */
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1);
+ while (1) {
+ udelay(WAIT_SLEEP_US);
+ usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5);
+ count++;
+ reg = read_csr(dd, ASIC_EEP_DATA);
+ if ((reg & SR1_BUSY) == 0)
+ break;
+ /* 200s is the largest time for a 128Mb device */
+ if (count > COUNT_DELAY_SEC(200)) {
+ dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n");
+ ret = -ETIMEDOUT;
+ break; /* break, not goto - must stop page mode */
+ }
+ }
+
+ /* stop page mode with a NOP */
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP);
+
+ return ret;
+}
+
+/*
+ * Read the device ID from the SPI controller.
+ */
+static u32 read_device_id(struct hfi1_devdata *dd)
+{
+ /* read the Manufacture Device ID */
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID);
+ return (u32)read_csr(dd, ASIC_EEP_DATA);
+}
+
+/*
+ * Erase the whole flash.
+ */
+static int erase_chip(struct hfi1_devdata *dd)
+{
+ int ret;
+
+ write_enable(dd);
+
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE);
+ ret = wait_for_not_busy(dd);
+
+ write_disable(dd);
+
+ return ret;
+}
+
+/*
+ * Erase a range using the 32KB erase command.
+ */
+static int erase_32kb_range(struct hfi1_devdata *dd, u32 start, u32 end)
+{
+ int ret = 0;
+
+ if (end < start)
+ return -EINVAL;
+
+ if ((start & MASK_32KB) || (end & MASK_32KB)) {
+ dd_dev_err(dd,
+ "%s: non-aligned range (0x%x,0x%x) for a 32KB erase\n",
+ __func__, start, end);
+ return -EINVAL;
+ }
+
+ write_enable(dd);
+
+ for (; start < end; start += SIZE_32KB) {
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+ write_csr(dd, ASIC_EEP_ADDR_CMD,
+ CMD_SECTOR_ERASE_32KB(start));
+ ret = wait_for_not_busy(dd);
+ if (ret)
+ goto done;
+ }
+
+done:
+ write_disable(dd);
+
+ return ret;
+}
+
+/*
+ * Read a 256 byte (64 dword) EPROM page.
+ * All callers have verified the offset is at a page boundary.
+ */
+static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result)
+{
+ int i;
+
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset));
+ for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++)
+ result[i] = (u32)read_csr(dd, ASIC_EEP_DATA);
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */
+}
+
+/*
+ * Read length bytes starting at offset. Copy to user address addr.
+ */
+static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+{
+ u32 offset;
+ u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+ int ret = 0;
+
+ /* reject anything not on an EPROM page boundary */
+ if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
+ return -EINVAL;
+
+ for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
+ read_page(dd, start + offset, buffer);
+ if (copy_to_user((void __user *)(addr + offset),
+ buffer, EP_PAGE_SIZE)) {
+ ret = -EFAULT;
+ goto done;
+ }
+ }
+
+done:
+ return ret;
+}
+
+/*
+ * Write a 256 byte (64 dword) EPROM page.
+ * All callers have verified the offset is at a page boundary.
+ */
+static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data)
+{
+ int i;
+
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+ write_csr(dd, ASIC_EEP_DATA, data[0]);
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset));
+ for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++)
+ write_csr(dd, ASIC_EEP_DATA, data[i]);
+ /* will close the open page */
+ return wait_for_not_busy(dd);
+}
+
+/*
+ * Write length bytes starting at offset. Read from user address addr.
+ */
+static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+{
+ u32 offset;
+ u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+ int ret = 0;
+
+ /* reject anything not on an EPROM page boundary */
+ if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
+ return -EINVAL;
+
+ write_enable(dd);
+
+ for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
+ if (copy_from_user(buffer, (void __user *)(addr + offset),
+ EP_PAGE_SIZE)) {
+ ret = -EFAULT;
+ goto done;
+ }
+ ret = write_page(dd, start + offset, buffer);
+ if (ret)
+ goto done;
+ }
+
+done:
+ write_disable(dd);
+ return ret;
+}
+
+/*
+ * Perform the given operation on the EPROM. Called from user space. The
+ * user credentials have already been checked.
+ *
+ * Return 0 on success, -ERRNO on error
+ */
+int handle_eprom_command(const struct hfi1_cmd *cmd)
+{
+ struct hfi1_devdata *dd;
+ u32 dev_id;
+ int ret = 0;
+
+ /*
+ * The EPROM is per-device, so use unit 0 as that will always
+ * exist.
+ */
+ dd = hfi1_lookup(0);
+ if (!dd) {
+ pr_err("%s: cannot find unit 0!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* lock against other callers touching the ASIC block */
+ mutex_lock(&eprom_mutex);
+
+ /* some platforms do not have an EPROM */
+ if (!eprom_available) {
+ ret = -ENOSYS;
+ goto done_asic;
+ }
+
+ /* lock against the other HFI on another OS */
+ ret = acquire_hw_mutex(dd);
+ if (ret) {
+ dd_dev_err(dd,
+ "%s: unable to acquire hw mutex, no EPROM support\n",
+ __func__);
+ goto done_asic;
+ }
+
+ dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n",
+ __func__, cmd->type, cmd->len, cmd->addr);
+
+ switch (cmd->type) {
+ case HFI1_CMD_EP_INFO:
+ if (cmd->len != sizeof(u32)) {
+ ret = -ERANGE;
+ break;
+ }
+ dev_id = read_device_id(dd);
+ /* addr points to a u32 user buffer */
+ if (copy_to_user((void __user *)cmd->addr, &dev_id,
+ sizeof(u32)))
+ ret = -EFAULT;
+ break;
+ case HFI1_CMD_EP_ERASE_CHIP:
+ ret = erase_chip(dd);
+ break;
+ case HFI1_CMD_EP_ERASE_P0:
+ if (cmd->len != P0_SIZE) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = erase_32kb_range(dd, 0, cmd->len);
+ break;
+ case HFI1_CMD_EP_ERASE_P1:
+ /* check for overflow */
+ if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = erase_32kb_range(dd, P1_START, P1_START + cmd->len);
+ break;
+ case HFI1_CMD_EP_READ_P0:
+ if (cmd->len != P0_SIZE) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = read_length(dd, 0, cmd->len, cmd->addr);
+ break;
+ case HFI1_CMD_EP_READ_P1:
+ /* check for overflow */
+ if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = read_length(dd, P1_START, cmd->len, cmd->addr);
+ break;
+ case HFI1_CMD_EP_WRITE_P0:
+ if (cmd->len > P0_SIZE) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = write_length(dd, 0, cmd->len, cmd->addr);
+ break;
+ case HFI1_CMD_EP_WRITE_P1:
+ /* check for overflow */
+ if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+ ret = -ERANGE;
+ break;
+ }
+ ret = write_length(dd, P1_START, cmd->len, cmd->addr);
+ break;
+ default:
+ dd_dev_err(dd, "%s: unexpected command %d\n",
+ __func__, cmd->type);
+ ret = -EINVAL;
+ break;
+ }
+
+ release_hw_mutex(dd);
+done_asic:
+ mutex_unlock(&eprom_mutex);
+ return ret;
+}
+
+/*
+ * Initialize the EPROM handler.
+ */
+int eprom_init(struct hfi1_devdata *dd)
+{
+ int ret = 0;
+
+ /* only the discrete chip has an EPROM, nothing to do */
+ if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0)
+ return 0;
+
+ /* lock against other callers */
+ mutex_lock(&eprom_mutex);
+ if (eprom_available) /* already initialized */
+ goto done_asic;
+
+ /*
+ * Lock against the other HFI on another OS - the mutex above
+ * would have caught anything in this driver. It is OK if
+ * both OSes reset the EPROM - as long as they don't do it at
+ * the same time.
+ */
+ ret = acquire_hw_mutex(dd);
+ if (ret) {
+ dd_dev_err(dd,
+ "%s: unable to acquire hw mutex, no EPROM support\n",
+ __func__);
+ goto done_asic;
+ }
+
+ /* reset EPROM to be sure it is in a good state */
+
+ /* set reset */
+ write_csr(dd, ASIC_EEP_CTL_STAT,
+ ASIC_EEP_CTL_STAT_EP_RESET_SMASK);
+ /* clear reset, set speed */
+ write_csr(dd, ASIC_EEP_CTL_STAT,
+ EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT);
+
+ /* wake the device with command "release powerdown NoID" */
+ write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID);
+
+ eprom_available = 1;
+ release_hw_mutex(dd);
+done_asic:
+ mutex_unlock(&eprom_mutex);
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,55 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+struct hfi1_cmd;
+struct hfi1_devdata;
+
+int eprom_init(struct hfi1_devdata *dd);
+int handle_eprom_command(const struct hfi1_cmd *cmd);