new file mode 100644
@@ -0,0 +1,546 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "hfi.h"
+#include "twsi.h"
+
+/*
+ * QSFP support for hfi driver, using "Two Wire Serial Interface" driver
+ * in twsi.c
+ */
+#define I2C_MAX_RETRY 4
+
+/*
+ * Unlocked i2c write. Must hold dd->qsfp_i2c_mutex.
+ */
+static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+ int offset, void *bp, int len)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ int ret, cnt;
+ u8 *buff = bp;
+
+ /* Make sure TWSI bus is in sane state. */
+ ret = hfi1_twsi_reset(dd, target);
+ if (ret) {
+ hfi1_dev_porterr(dd, ppd->port,
+ "I2C interface Reset for write failed\n");
+ return -EIO;
+ }
+
+ cnt = 0;
+ while (cnt < len) {
+ int wlen = len - cnt;
+
+ ret = hfi1_twsi_blk_wr(dd, target, i2c_addr, offset,
+ buff + cnt, wlen);
+ if (ret) {
+ /* hfi1_twsi_blk_wr() 1 for error, else 0 */
+ return -EIO;
+ }
+ offset += wlen;
+ cnt += wlen;
+ }
+
+ /* Must wait min 20us between qsfp i2c transactions */
+ udelay(20);
+
+ return cnt;
+}
+
+int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
+ void *bp, int len)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex);
+ if (!ret) {
+ ret = __i2c_write(ppd, target, i2c_addr, offset, bp, len);
+ mutex_unlock(&dd->qsfp_i2c_mutex);
+ }
+
+ return ret;
+}
+
+/*
+ * Unlocked i2c read. Must hold dd->qsfp_i2c_mutex.
+ */
+static int __i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+ int offset, void *bp, int len)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ int ret, cnt, pass = 0;
+ int stuck = 0;
+ u8 *buff = bp;
+
+ /* Make sure TWSI bus is in sane state. */
+ ret = hfi1_twsi_reset(dd, target);
+ if (ret) {
+ hfi1_dev_porterr(dd, ppd->port,
+ "I2C interface Reset for read failed\n");
+ ret = -EIO;
+ stuck = 1;
+ goto exit;
+ }
+
+ cnt = 0;
+ while (cnt < len) {
+ int rlen = len - cnt;
+
+ ret = hfi1_twsi_blk_rd(dd, target, i2c_addr, offset,
+ buff + cnt, rlen);
+ /* Some QSFP's fail first try. Retry as experiment */
+ if (ret && cnt == 0 && ++pass < I2C_MAX_RETRY)
+ continue;
+ if (ret) {
+ /* hfi1_twsi_blk_rd() 1 for error, else 0 */
+ ret = -EIO;
+ goto exit;
+ }
+ offset += rlen;
+ cnt += rlen;
+ }
+
+ ret = cnt;
+
+exit:
+ if (stuck)
+ dd_dev_err(dd, "I2C interface bus stuck non-idle\n");
+
+ if (pass >= I2C_MAX_RETRY && ret)
+ hfi1_dev_porterr(dd, ppd->port,
+ "I2C failed even retrying\n");
+ else if (pass)
+ hfi1_dev_porterr(dd, ppd->port, "I2C retries: %d\n", pass);
+
+ /* Must wait min 20us between qsfp i2c transactions */
+ udelay(20);
+
+ return ret;
+}
+
+int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
+ void *bp, int len)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex);
+ if (!ret) {
+ ret = __i2c_read(ppd, target, i2c_addr, offset, bp, len);
+ mutex_unlock(&dd->qsfp_i2c_mutex);
+ }
+
+ return ret;
+}
+
+int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+ int len)
+{
+ int count = 0;
+ int offset;
+ int nwrite;
+ int ret;
+ u8 page;
+
+ ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex);
+ if (ret)
+ return ret;
+
+ while (count < len) {
+ /*
+ * Set the qsfp page based on a zero-based addresss
+ * and a page size of QSFP_PAGESIZE bytes.
+ */
+ page = (u8)(addr / QSFP_PAGESIZE);
+
+ ret = __i2c_write(ppd, target, QSFP_DEV,
+ QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1);
+ if (ret != 1) {
+ hfi1_dev_porterr(
+ ppd->dd,
+ ppd->port,
+ "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret);
+ ret = -EIO;
+ break;
+ }
+
+ /* truncate write to end of page if crossing page boundary */
+ offset = addr % QSFP_PAGESIZE;
+ nwrite = len - count;
+ if ((offset + nwrite) > QSFP_PAGESIZE)
+ nwrite = QSFP_PAGESIZE - offset;
+
+ ret = __i2c_write(ppd, target, QSFP_DEV, offset, bp + count,
+ nwrite);
+ if (ret <= 0) /* stop on error or nothing read */
+ break;
+
+ count += ret;
+ addr += ret;
+ }
+
+ mutex_unlock(&ppd->dd->qsfp_i2c_mutex);
+
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+ int len)
+{
+ int count = 0;
+ int offset;
+ int nread;
+ int ret;
+ u8 page;
+
+ ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex);
+ if (ret)
+ return ret;
+
+ while (count < len) {
+ /*
+ * Set the qsfp page based on a zero-based address
+ * and a page size of QSFP_PAGESIZE bytes.
+ */
+ page = (u8)(addr / QSFP_PAGESIZE);
+ ret = __i2c_write(ppd, target, QSFP_DEV,
+ QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1);
+ if (ret != 1) {
+ hfi1_dev_porterr(
+ ppd->dd,
+ ppd->port,
+ "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret);
+ ret = -EIO;
+ break;
+ }
+
+ /* truncate read to end of page if crossing page boundary */
+ offset = addr % QSFP_PAGESIZE;
+ nread = len - count;
+ if ((offset + nread) > QSFP_PAGESIZE)
+ nread = QSFP_PAGESIZE - offset;
+
+ ret = __i2c_read(ppd, target, QSFP_DEV, offset, bp + count,
+ nread);
+ if (ret <= 0) /* stop on error or nothing read */
+ break;
+
+ count += ret;
+ addr += ret;
+ }
+
+ mutex_unlock(&ppd->dd->qsfp_i2c_mutex);
+
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/*
+ * This function caches the QSFP memory range in 128 byte chunks.
+ * As an example, the next byte after address 255 is byte 128 from
+ * upper page 01H (if existing) rather than byte 0 from lower page 00H.
+ */
+int refresh_qsfp_cache(struct hfi1_pportdata *ppd, struct qsfp_data *cp)
+{
+ u32 target = ppd->dd->hfi1_id;
+ int ret;
+ unsigned long flags;
+ u8 *cache = &cp->cache[0];
+
+ /* ensure sane contents on invalid reads, for cable swaps */
+ memset(cache, 0, (QSFP_MAX_NUM_PAGES*128));
+ dd_dev_info(ppd->dd, "%s: called\n", __func__);
+ if (!qsfp_mod_present(ppd)) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ ret = qsfp_read(ppd, target, 0, cache, 256);
+ if (ret != 256) {
+ dd_dev_info(ppd->dd,
+ "%s: Read of pages 00H failed, expected 256, got %d\n",
+ __func__, ret);
+ goto bail;
+ }
+
+ if (cache[0] != 0x0C && cache[0] != 0x0D)
+ goto bail;
+
+ /* Is paging enabled? */
+ if (!(cache[2] & 4)) {
+
+ /* Paging enabled, page 03 required */
+ if ((cache[195] & 0xC0) == 0xC0) {
+ /* all */
+ ret = qsfp_read(ppd, target, 384, cache + 256, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ ret = qsfp_read(ppd, target, 640, cache + 384, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ ret = qsfp_read(ppd, target, 896, cache + 512, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ } else if ((cache[195] & 0x80) == 0x80) {
+ /* only page 2 and 3 */
+ ret = qsfp_read(ppd, target, 640, cache + 384, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ ret = qsfp_read(ppd, target, 896, cache + 512, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ } else if ((cache[195] & 0x40) == 0x40) {
+ /* only page 1 and 3 */
+ ret = qsfp_read(ppd, target, 384, cache + 256, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ ret = qsfp_read(ppd, target, 896, cache + 512, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ } else {
+ /* only page 3 */
+ ret = qsfp_read(ppd, target, 896, cache + 512, 128);
+ if (ret <= 0 || ret != 128) {
+ dd_dev_info(ppd->dd, "%s: failed\n", __func__);
+ goto bail;
+ }
+ }
+ }
+
+ spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags);
+ ppd->qsfp_info.cache_valid = 1;
+ ppd->qsfp_info.cache_refresh_required = 0;
+ spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags);
+
+ return 0;
+
+bail:
+ memset(cache, 0, (QSFP_MAX_NUM_PAGES*128));
+ return ret;
+}
+
+const char * const hfi1_qsfp_devtech[16] = {
+ "850nm VCSEL", "1310nm VCSEL", "1550nm VCSEL", "1310nm FP",
+ "1310nm DFB", "1550nm DFB", "1310nm EML", "1550nm EML",
+ "Cu Misc", "1490nm DFB", "Cu NoEq", "Cu Eq",
+ "Undef", "Cu Active BothEq", "Cu FarEq", "Cu NearEq"
+};
+
+#define QSFP_DUMP_CHUNK 16 /* Holds longest string */
+#define QSFP_DEFAULT_HDR_CNT 224
+
+static const char *pwr_codes = "1.5W2.0W2.5W3.5W";
+
+int qsfp_mod_present(struct hfi1_pportdata *ppd)
+{
+ if (HFI1_CAP_IS_KSET(QSFP_ENABLED)) {
+ struct hfi1_devdata *dd = ppd->dd;
+ u64 reg;
+
+ reg = read_csr(dd,
+ dd->hfi1_id ? ASIC_QSFP2_IN : ASIC_QSFP1_IN);
+ return !(reg & QSFP_HFI0_MODPRST_N);
+ }
+ /* always return cable present */
+ return 1;
+}
+
+/*
+ * This function maps QSFP memory addresses in 128 byte chunks in the following
+ * fashion per the CableInfo SMA query definition in the IBA 1.3 spec/OPA Gen 1
+ * spec
+ * For addr 000-127, lower page 00h
+ * For addr 128-255, upper page 00h
+ * For addr 256-383, upper page 01h
+ * For addr 384-511, upper page 02h
+ * For addr 512-639, upper page 03h
+ *
+ * For addresses beyond this range, it returns the invalid range of data buffer
+ * set to 0.
+ * For upper pages that are optional, if they are not valid, returns the
+ * particular range of bytes in the data buffer set to 0.
+ */
+int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len,
+ u8 *data)
+{
+ struct hfi1_pportdata *ppd;
+ u32 excess_len = len;
+ int ret = 0;
+
+ if (port_num > dd->num_pports || port_num < 1) {
+ dd_dev_info(dd, "%s: Invalid port number %d\n",
+ __func__, port_num);
+ ret = -EINVAL;
+ goto set_zeroes;
+ }
+
+ ppd = dd->pport + (port_num - 1);
+ if (!qsfp_mod_present(ppd)) {
+ ret = -ENODEV;
+ goto set_zeroes;
+ }
+
+ if (!ppd->qsfp_info.cache_valid) {
+ ret = -EINVAL;
+ goto set_zeroes;
+ }
+
+ if (addr >= (QSFP_MAX_NUM_PAGES * 128)) {
+ ret = -ERANGE;
+ goto set_zeroes;
+ }
+
+ if ((addr + len) >= (QSFP_MAX_NUM_PAGES * 128)) {
+ excess_len = (addr + len) - (QSFP_MAX_NUM_PAGES * 128);
+ memcpy(data, &ppd->qsfp_info.cache[addr], (len - excess_len));
+ data += (len - excess_len);
+ goto set_zeroes;
+ }
+
+ memcpy(data, &ppd->qsfp_info.cache[addr], len);
+ return 0;
+
+set_zeroes:
+ memset(data, 0, excess_len);
+ return ret;
+}
+
+int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len)
+{
+ u8 *cache = &ppd->qsfp_info.cache[0];
+ u8 bin_buff[QSFP_DUMP_CHUNK];
+ char lenstr[6];
+ int sofar, ret;
+ int bidx = 0;
+ u8 *atten = &cache[QSFP_ATTEN_OFFS];
+ u8 *vendor_oui = &cache[QSFP_VOUI_OFFS];
+
+ sofar = 0;
+ lenstr[0] = ' ';
+ lenstr[1] = '\0';
+
+ if (ppd->qsfp_info.cache_valid) {
+
+ if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS]))
+ sprintf(lenstr, "%dM ", cache[QSFP_MOD_LEN_OFFS]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n",
+ pwr_codes +
+ (QSFP_PWR(cache[QSFP_MOD_PWR_OFFS]) * 4));
+
+ sofar += scnprintf(buf + sofar, len - sofar, "TECH:%s%s\n",
+ lenstr,
+ hfi1_qsfp_devtech[(cache[QSFP_MOD_TECH_OFFS]) >> 4]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Vendor:%.*s\n",
+ QSFP_VEND_LEN, &cache[QSFP_VEND_OFFS]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "OUI:%06X\n",
+ QSFP_OUI(vendor_oui));
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Part#:%.*s\n",
+ QSFP_PN_LEN, &cache[QSFP_PN_OFFS]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Rev:%.*s\n",
+ QSFP_REV_LEN, &cache[QSFP_REV_OFFS]);
+
+ if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS]))
+ sofar += scnprintf(buf + sofar, len - sofar,
+ "Atten:%d, %d\n",
+ QSFP_ATTEN_SDR(atten),
+ QSFP_ATTEN_DDR(atten));
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Serial:%.*s\n",
+ QSFP_SN_LEN, &cache[QSFP_SN_OFFS]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Date:%.*s\n",
+ QSFP_DATE_LEN, &cache[QSFP_DATE_OFFS]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Lot:%.*s\n",
+ QSFP_LOT_LEN, &cache[QSFP_LOT_OFFS]);
+
+ while (bidx < QSFP_DEFAULT_HDR_CNT) {
+ int iidx;
+
+ memcpy(bin_buff, &cache[bidx], QSFP_DUMP_CHUNK);
+ for (iidx = 0; iidx < QSFP_DUMP_CHUNK; ++iidx) {
+ sofar += scnprintf(buf + sofar, len-sofar,
+ " %02X", bin_buff[iidx]);
+ }
+ sofar += scnprintf(buf + sofar, len - sofar, "\n");
+ bidx += QSFP_DUMP_CHUNK;
+ }
+ }
+ ret = sofar;
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,222 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/* QSFP support common definitions, for hfi driver */
+
+#define QSFP_DEV 0xA0
+#define QSFP_PWR_LAG_MSEC 2000
+#define QSFP_MODPRS_LAG_MSEC 20
+/* 128 byte pages, per SFF 8636 rev 2.4 */
+#define QSFP_MAX_NUM_PAGES 5
+
+/*
+ * Below are masks for QSFP pins. Pins are the same for HFI0 and HFI1.
+ * _N means asserted low
+ */
+#define QSFP_HFI0_I2CCLK (1 << 0)
+#define QSFP_HFI0_I2CDAT (1 << 1)
+#define QSFP_HFI0_RESET_N (1 << 2)
+#define QSFP_HFI0_INT_N (1 << 3)
+#define QSFP_HFI0_MODPRST_N (1 << 4)
+
+/* QSFP is paged at 256 bytes */
+#define QSFP_PAGESIZE 256
+
+/* Defined fields that Intel requires of qualified cables */
+/* Byte 0 is Identifier, not checked */
+/* Byte 1 is reserved "status MSB" */
+/* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */
+/*
+ * Rest of first 128 not used, although 127 is reserved for page select
+ * if module is not "Flat memory".
+ */
+#define QSFP_PAGE_SELECT_BYTE_OFFS 127
+/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
+#define QSFP_MOD_ID_OFFS 128
+/*
+ * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class
+ * 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
+ */
+#define QSFP_MOD_PWR_OFFS 129
+/* Byte 130 is Connector type. Not Intel req'd */
+/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
+/* Byte 139 is encoding. code 0x01 is 8b10b. Not Intel req'd */
+/* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not Intel req'd */
+/* Byte 141 is Extended Rate Select. Not Intel req'd */
+/* Bytes 142..145 are lengths for various fiber types. Not Intel req'd */
+/* Byte 146 is length for Copper. Units of 1 meter */
+#define QSFP_MOD_LEN_OFFS 146
+/*
+ * Byte 147 is Device technology. D0..3 not Intel req'd
+ * D4..7 select from 15 choices, translated by table:
+ */
+#define QSFP_MOD_TECH_OFFS 147
+extern const char *const hfi1_qsfp_devtech[16];
+/* Active Equalization includes fiber, copper full EQ, and copper near Eq */
+#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
+/* Active Equalization includes fiber, copper full EQ, and copper far Eq */
+#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
+/* Attenuation should be valid for copper other than full/near Eq */
+#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
+/* Length is only valid if technology is "copper" */
+#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
+#define QSFP_TECH_1490 9
+
+#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
+ oui[2])
+#define QSFP_OUI_AMPHENOL 0x415048
+#define QSFP_OUI_FINISAR 0x009065
+#define QSFP_OUI_GORE 0x002177
+
+/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
+#define QSFP_VEND_OFFS 148
+#define QSFP_VEND_LEN 16
+/* Byte 164 is IB Extended transceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
+#define QSFP_IBXCV_OFFS 164
+/* Bytes 165..167 are Vendor OUI number */
+#define QSFP_VOUI_OFFS 165
+#define QSFP_VOUI_LEN 3
+/* Bytes 168..183 are Vendor Part Number, string */
+#define QSFP_PN_OFFS 168
+#define QSFP_PN_LEN 16
+/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
+#define QSFP_REV_OFFS 184
+#define QSFP_REV_LEN 2
+/*
+ * Bytes 186,187 are Wavelength, if Optical. Not Intel req'd
+ * If copper, they are attenuation in dB:
+ * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
+ */
+#define QSFP_ATTEN_OFFS 186
+#define QSFP_ATTEN_LEN 2
+/* Bytes 188,189 are Wavelength tolerance, not Intel req'd */
+/* Byte 190 is Max Case Temp. Not Intel req'd */
+/* Byte 191 is LSB of sum of bytes 128..190. Not Intel req'd */
+#define QSFP_CC_OFFS 191
+/* Bytes 192..195 are Options implemented in qsfp. Not Intel req'd */
+/* Bytes 196..211 are Serial Number, String */
+#define QSFP_SN_OFFS 196
+#define QSFP_SN_LEN 16
+/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
+#define QSFP_DATE_OFFS 212
+#define QSFP_DATE_LEN 6
+/* Bytes 218,219 are optional lot-code, string */
+#define QSFP_LOT_OFFS 218
+#define QSFP_LOT_LEN 2
+/* Bytes 220, 221 indicate monitoring options, Not Intel req'd */
+/* Byte 223 is LSB of sum of bytes 192..222 */
+#define QSFP_CC_EXT_OFFS 223
+
+/*
+ * Interrupt flag masks
+ */
+#define QSFP_DATA_NOT_READY 0x01
+
+#define QSFP_HIGH_TEMP_ALARM 0x80
+#define QSFP_LOW_TEMP_ALARM 0x40
+#define QSFP_HIGH_TEMP_WARNING 0x20
+#define QSFP_LOW_TEMP_WARNING 0x10
+
+#define QSFP_HIGH_VCC_ALARM 0x80
+#define QSFP_LOW_VCC_ALARM 0x40
+#define QSFP_HIGH_VCC_WARNING 0x20
+#define QSFP_LOW_VCC_WARNING 0x10
+
+#define QSFP_HIGH_POWER_ALARM 0x88
+#define QSFP_LOW_POWER_ALARM 0x44
+#define QSFP_HIGH_POWER_WARNING 0x22
+#define QSFP_LOW_POWER_WARNING 0x11
+
+#define QSFP_HIGH_BIAS_ALARM 0x88
+#define QSFP_LOW_BIAS_ALARM 0x44
+#define QSFP_HIGH_BIAS_WARNING 0x22
+#define QSFP_LOW_BIAS_WARNING 0x11
+
+/*
+ * struct qsfp_data encapsulates state of QSFP device for one port.
+ * it will be part of port-specific data if a board supports QSFP.
+ *
+ * Since multiple board-types use QSFP, and their pport_data structs
+ * differ (in the chip-specific section), we need a pointer to its head.
+ *
+ * Avoiding premature optimization, we will have one work_struct per port,
+ * and let the qsfp_lock arbitrate access to common resources.
+ *
+ */
+
+#define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3)
+#define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
+#define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
+
+struct qsfp_data {
+ /* Helps to find our way */
+ struct hfi1_pportdata *ppd;
+ struct work_struct qsfp_work;
+ u8 cache[QSFP_MAX_NUM_PAGES*128];
+ spinlock_t qsfp_lock;
+ u8 check_interrupt_flags;
+ u8 qsfp_interrupt_functional;
+ u8 cache_valid;
+ u8 cache_refresh_required;
+};
+
+int refresh_qsfp_cache(struct hfi1_pportdata *ppd,
+ struct qsfp_data *cp);
+int qsfp_mod_present(struct hfi1_pportdata *ppd);
+int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr,
+ u32 len, u8 *data);
+
+int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+ int offset, void *bp, int len);
+int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+ int offset, void *bp, int len);
+int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+ int len);
+int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+ int len);