[mlx5-next,3/5] net/mlx5: Handle "enable_roce" devlink param

Commit Message

Saeed Mahameed Nov. 8, 2019, 11:45 p.m. UTC

From: Michael Guralnik <[e-mail]>

Register "enable_roce" param, default value is RoCE enabled.
Current configuration is stored on mlx5_core_dev and exposed to user
through the cmode runtime devlink param.
Changing configuration requires changing the cmode driverinit devlink
param and calling devlink reload.

Signed-off-by: Michael Guralnik <[e-mail]>
Acked-by: Jiri Pirko <[e-mail]>
Signed-off-by: Saeed Mahameed <[e-mail]>
---
 .../device_drivers/mellanox/mlx5.rst          | 21 ++++++++++++++++++
 .../networking/devlink-params-mlx5.txt        |  5 +++++
 .../net/ethernet/mellanox/mlx5/core/devlink.c | 22 +++++++++++++++++++
 include/linux/mlx5/driver.h                   | 11 ++++++++++
 4 files changed, 59 insertions(+)

Patch

diff --git a/Documentation/networking/device_drivers/mellanox/mlx5.rst b/Documentation/networking/device_drivers/mellanox/mlx5.rst
index d071c6b49e1f..7599dceba9f1 100644
--- a/Documentation/networking/device_drivers/mellanox/mlx5.rst
+++ b/Documentation/networking/device_drivers/mellanox/mlx5.rst
@@ -154,6 +154,27 @@  User command examples:
       values:
          cmode runtime value smfs
 
+enable_roce: RoCE enablement state
+----------------------------------
+RoCE enablement state controls driver support for RoCE traffic.
+When RoCE is disabled, there is no gid table, only raw ethernet QPs are supported and traffic on the well known UDP RoCE port is handled as raw ethernet traffic.
+
+To change RoCE enablement state a user must change the driverinit cmode value and run devlink reload.
+
+User command examples:
+
+- Disable RoCE::
+
+    $ devlink dev param set pci/0000:06:00.0 name enable_roce value false cmode driverinit
+    $ devlink dev reload pci/0000:06:00.0
+
+- Read RoCE enablement state::
+
+    $ devlink dev param show pci/0000:06:00.0 name enable_roce
+      pci/0000:06:00.0:
+      name enable_roce type generic
+      values:
+         cmode driverinit value true
 
 Devlink health reporters
 ========================
diff --git a/Documentation/networking/devlink-params-mlx5.txt b/Documentation/networking/devlink-params-mlx5.txt
index 8c0b82d655dc..5071467118bd 100644
--- a/Documentation/networking/devlink-params-mlx5.txt
+++ b/Documentation/networking/devlink-params-mlx5.txt
@@ -10,3 +10,8 @@  flow_steering_mode	[DEVICE, DRIVER-SPECIFIC]
 			without firmware intervention.
 			Type: String
 			Configuration mode: runtime
+
+enable_roce		[DEVICE, GENERIC]
+			Enable handling of RoCE traffic in the device.
+			Defaultly enabled.
+			Configuration mode: driverinit
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index 381925c90d94..b2c26388edb1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -177,12 +177,29 @@  enum mlx5_devlink_param_id {
 	MLX5_DEVLINK_PARAM_FLOW_STEERING_MODE,
 };
 
+static int mlx5_devlink_enable_roce_validate(struct devlink *devlink, u32 id,
+					     union devlink_param_value val,
+					     struct netlink_ext_ack *extack)
+{
+	struct mlx5_core_dev *dev = devlink_priv(devlink);
+	bool new_state = val.vbool;
+
+	if (new_state && !MLX5_CAP_GEN(dev, roce)) {
+		NL_SET_ERR_MSG_MOD(extack, "Device doesn't support RoCE");
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
 static const struct devlink_param mlx5_devlink_params[] = {
 	DEVLINK_PARAM_DRIVER(MLX5_DEVLINK_PARAM_FLOW_STEERING_MODE,
 			     "flow_steering_mode", DEVLINK_PARAM_TYPE_STRING,
 			     BIT(DEVLINK_PARAM_CMODE_RUNTIME),
 			     mlx5_devlink_fs_mode_get, mlx5_devlink_fs_mode_set,
 			     mlx5_devlink_fs_mode_validate),
+	DEVLINK_PARAM_GENERIC(ENABLE_ROCE, BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+			      NULL, NULL, mlx5_devlink_enable_roce_validate),
 };
 
 static void mlx5_devlink_set_params_init_values(struct devlink *devlink)
@@ -197,6 +214,11 @@  static void mlx5_devlink_set_params_init_values(struct devlink *devlink)
 	devlink_param_driverinit_value_set(devlink,
 					   MLX5_DEVLINK_PARAM_FLOW_STEERING_MODE,
 					   value);
+
+	value.vbool = MLX5_CAP_GEN(dev, roce);
+	devlink_param_driverinit_value_set(devlink,
+					   DEVLINK_PARAM_GENERIC_ID_ENABLE_ROCE,
+					   value);
 }
 
 int mlx5_devlink_register(struct devlink *devlink, struct device *dev)
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 7b4801e96feb..1884513aac90 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1191,4 +1191,15 @@  enum {
 	MLX5_TRIGGERED_CMD_COMP = (u64)1 << 32,
 };
 
+static inline bool mlx5_is_roce_enabled(struct mlx5_core_dev *dev)
+{
+	struct devlink *devlink = priv_to_devlink(dev);
+	union devlink_param_value val;
+
+	devlink_param_driverinit_value_get(devlink,
+					   DEVLINK_PARAM_GENERIC_ID_ENABLE_ROCE,
+					   &val);
+	return val.vbool;
+}
+
 #endif /* MLX5_DRIVER_H */