| Message ID | 20230530141304.1850195-1-schnelle@linux.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [net] net/mlx5: Fix setting of irq->map.index for static IRQ case | expand |
On Tue, May 30, 2023 at 04:13:04PM +0200, Niklas Schnelle wrote: > When dynamic IRQ allocation is not supported all IRQs are allocated up > front in mlx5_irq_table_create() instead of dynamically as part of > mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set > via the mapping returned by pci_msix_alloc_irq_at(). In the static case > and prior to commit 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") > irq->map.index was set in mlx4_irq_alloc() twice once initially to 0 and > then to the requested index before storing in the xarray. After this > commit it is only set to 0 which breaks all other IRQ mappins. > > Fix this by setting irq->map.index to the requested index together with > irq->map.virq and improve the related comment to make it clearer which > cases it deals with. > > Fixes: 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com>
On Tue, May 30, 2023 at 04:13:04PM +0200, Niklas Schnelle wrote: > When dynamic IRQ allocation is not supported all IRQs are allocated up > front in mlx5_irq_table_create() instead of dynamically as part of > mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set > via the mapping returned by pci_msix_alloc_irq_at(). In the static case > and prior to commit 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") > irq->map.index was set in mlx4_irq_alloc() twice once initially to 0 and > then to the requested index before storing in the xarray. After this > commit it is only set to 0 which breaks all other IRQ mappins. s/mappins/mappings/ We were seeing the issue that this fixes on a Cavium ThunderX2 system and the analysis looks good so: Tested-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org>
> From: Niklas Schnelle <schnelle@linux.ibm.com> > Sent: Tuesday, 30 May 2023 17:13 > To: Shay Drory <shayd@nvidia.com>; Saeed Mahameed > <saeedm@nvidia.com>; Eli Cohen <elic@nvidia.com>; Leon Romanovsky > <leon@kernel.org>; David S. Miller <davem@davemloft.net>; Eric Dumazet > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni > <pabeni@redhat.com> > Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > s390@vger.kernel.org; linux-rdma@vger.kernel.org > Subject: [PATCH net] net/mlx5: Fix setting of irq->map.index for static IRQ case > > When dynamic IRQ allocation is not supported all IRQs are allocated up > front in mlx5_irq_table_create() instead of dynamically as part of > mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set > via the mapping returned by pci_msix_alloc_irq_at(). In the static case > and prior to commit 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") > irq->map.index was set in mlx4_irq_alloc() twice once initially to 0 and > then to the requested index before storing in the xarray. After this > commit it is only set to 0 which breaks all other IRQ mappins. > s/mlx4_irq_alloc/mlx5_irq_alloc/ Reviewed-by: Eli Cohen <elic@nvidia.com> > Fix this by setting irq->map.index to the requested index together with > irq->map.virq and improve the related comment to make it clearer which > cases it deals with. > > Fixes: 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> > --- > drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c > b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c > index db5687d9fec9..fd5b43e8f3bb 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c > +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c > @@ -232,12 +232,13 @@ struct mlx5_irq *mlx5_irq_alloc(struct > mlx5_irq_pool *pool, int i, > if (!irq) > return ERR_PTR(-ENOMEM); > if (!i || !pci_msix_can_alloc_dyn(dev->pdev)) { > - /* The vector at index 0 was already allocated. > - * Just get the irq number. If dynamic irq is not supported > - * vectors have also been allocated. > + /* The vector at index 0 is always statically allocated. If > + * dynamic irq is not supported all vectors are statically > + * allocated. In both cases just get the irq number and set > + * the index. > */ > irq->map.virq = pci_irq_vector(dev->pdev, i); > - irq->map.index = 0; > + irq->map.index = i; > } else { > irq->map = pci_msix_alloc_irq_at(dev->pdev, > MSI_ANY_INDEX, af_desc); > if (!irq->map.virq) { > -- > 2.39.2
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c index db5687d9fec9..fd5b43e8f3bb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c @@ -232,12 +232,13 @@ struct mlx5_irq *mlx5_irq_alloc(struct mlx5_irq_pool *pool, int i, if (!irq) return ERR_PTR(-ENOMEM); if (!i || !pci_msix_can_alloc_dyn(dev->pdev)) { - /* The vector at index 0 was already allocated. - * Just get the irq number. If dynamic irq is not supported - * vectors have also been allocated. + /* The vector at index 0 is always statically allocated. If + * dynamic irq is not supported all vectors are statically + * allocated. In both cases just get the irq number and set + * the index. */ irq->map.virq = pci_irq_vector(dev->pdev, i); - irq->map.index = 0; + irq->map.index = i; } else { irq->map = pci_msix_alloc_irq_at(dev->pdev, MSI_ANY_INDEX, af_desc); if (!irq->map.virq) {
When dynamic IRQ allocation is not supported all IRQs are allocated up front in mlx5_irq_table_create() instead of dynamically as part of mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set via the mapping returned by pci_msix_alloc_irq_at(). In the static case and prior to commit 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") irq->map.index was set in mlx4_irq_alloc() twice once initially to 0 and then to the requested index before storing in the xarray. After this commit it is only set to 0 which breaks all other IRQ mappins. Fix this by setting irq->map.index to the requested index together with irq->map.virq and improve the related comment to make it clearer which cases it deals with. Fixes: 1da438c0ae02 ("net/mlx5: Fix indexing of mlx5_irq") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)