| Message ID | 20240209202312.30181-1-jdamato@fastly.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [net-next,v4] net/mlx5e: link NAPI instances to queues and IRQs | expand |
On 09/02/2024 22:23, Joe Damato wrote: > Make mlx5 compatible with the newly added netlink queue GET APIs. > > Signed-off-by: Joe Damato <jdamato@fastly.com> > --- > v3 -> v4: > - Use sq->netdev and sq->cq.napi to get the netdev and NAPI structures in > mlx5e_activate_txqsq and mlx5e_deactivate_txqsq as requested by Tariq > Toukan [1] > - Only set or unset NETDEV_QUEUE_TYPE_RX when the MLX5E_PTP_STATE_RX bit > is on in mlx5e_ptp_activate_channel and mlx5e_ptp_deactivate_channel as > requested by Rahul Rameshbabu [2] > > v2 -> v3: > - Fix commit message subject > - call netif_queue_set_napi in mlx5e_ptp_activate_channel and > mlx5e_ptp_deactivate_channel to enable/disable NETDEV_QUEUE_TYPE_RX for > the PTP channel. > - Modify mlx5e_activate_txqsq and mlx5e_deactivate_txqsq to set > NETDEV_QUEUE_TYPE_TX which should take care of all TX queues including > QoS/HTB and PTP. > - Rearrange mlx5e_activate_channel and mlx5e_deactivate_channel for > better ordering when setting and unsetting NETDEV_QUEUE_TYPE_RX NAPI > structs > > v1 -> v2: > - Move netlink NULL code to mlx5e_deactivate_channel > - Move netif_napi_set_irq to mlx5e_open_channel and avoid storing the > irq, after netif_napi_add which itself sets the IRQ to -1 > > [1]: https://lore.kernel.org/all/8c083e6d-5fcd-4557-88dd-0f95acdbc747@gmail.com/ > [2]: https://lore.kernel.org/all/871q9mz1a0.fsf@nvidia.com/ > > drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c | 5 ++++- > drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) > Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Thanks for your patch.
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Fri, 9 Feb 2024 20:23:08 +0000 you wrote: > Make mlx5 compatible with the newly added netlink queue GET APIs. > > Signed-off-by: Joe Damato <jdamato@fastly.com> > --- > v3 -> v4: > - Use sq->netdev and sq->cq.napi to get the netdev and NAPI structures in > mlx5e_activate_txqsq and mlx5e_deactivate_txqsq as requested by Tariq > Toukan [1] > - Only set or unset NETDEV_QUEUE_TYPE_RX when the MLX5E_PTP_STATE_RX bit > is on in mlx5e_ptp_activate_channel and mlx5e_ptp_deactivate_channel as > requested by Rahul Rameshbabu [2] > > [...] Here is the summary with links: - [net-next,v4] net/mlx5e: link NAPI instances to queues and IRQs https://git.kernel.org/netdev/net-next/c/f25e7b82635f You are awesome, thank you!
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c index 078f56a3cbb2..fd4ef6431142 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c @@ -935,6 +935,7 @@ void mlx5e_ptp_activate_channel(struct mlx5e_ptp *c) if (test_bit(MLX5E_PTP_STATE_RX, c->state)) { mlx5e_ptp_rx_set_fs(c->priv); mlx5e_activate_rq(&c->rq); + netif_queue_set_napi(c->netdev, c->rq.ix, NETDEV_QUEUE_TYPE_RX, &c->napi); } mlx5e_trigger_napi_sched(&c->napi); } @@ -943,8 +944,10 @@ void mlx5e_ptp_deactivate_channel(struct mlx5e_ptp *c) { int tc; - if (test_bit(MLX5E_PTP_STATE_RX, c->state)) + if (test_bit(MLX5E_PTP_STATE_RX, c->state)) { + netif_queue_set_napi(c->netdev, c->rq.ix, NETDEV_QUEUE_TYPE_RX, NULL); mlx5e_deactivate_rq(&c->rq); + } if (test_bit(MLX5E_PTP_STATE_TX, c->state)) { for (tc = 0; tc < c->num_tc; tc++) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c8e8f512803e..be809556b2e1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1806,6 +1806,7 @@ void mlx5e_activate_txqsq(struct mlx5e_txqsq *sq) set_bit(MLX5E_SQ_STATE_ENABLED, &sq->state); netdev_tx_reset_queue(sq->txq); netif_tx_start_queue(sq->txq); + netif_queue_set_napi(sq->netdev, sq->txq_ix, NETDEV_QUEUE_TYPE_TX, sq->cq.napi); } void mlx5e_tx_disable_queue(struct netdev_queue *txq) @@ -1819,6 +1820,7 @@ void mlx5e_deactivate_txqsq(struct mlx5e_txqsq *sq) { struct mlx5_wq_cyc *wq = &sq->wq; + netif_queue_set_napi(sq->netdev, sq->txq_ix, NETDEV_QUEUE_TYPE_TX, NULL); clear_bit(MLX5E_SQ_STATE_ENABLED, &sq->state); synchronize_net(); /* Sync with NAPI to prevent netif_tx_wake_queue. */ @@ -2560,6 +2562,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->lag_port = mlx5e_enumerate_lag_port(priv->mdev, ix); netif_napi_add(netdev, &c->napi, mlx5e_napi_poll); + netif_napi_set_irq(&c->napi, irq); err = mlx5e_open_queues(c, params, cparam); if (unlikely(err)) @@ -2602,12 +2605,16 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c) mlx5e_activate_xsk(c); else mlx5e_activate_rq(&c->rq); + + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, &c->napi); } static void mlx5e_deactivate_channel(struct mlx5e_channel *c) { int tc; + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, NULL); + if (test_bit(MLX5E_CHANNEL_STATE_XSK, c->state)) mlx5e_deactivate_xsk(c); else
Make mlx5 compatible with the newly added netlink queue GET APIs. Signed-off-by: Joe Damato <jdamato@fastly.com> --- v3 -> v4: - Use sq->netdev and sq->cq.napi to get the netdev and NAPI structures in mlx5e_activate_txqsq and mlx5e_deactivate_txqsq as requested by Tariq Toukan [1] - Only set or unset NETDEV_QUEUE_TYPE_RX when the MLX5E_PTP_STATE_RX bit is on in mlx5e_ptp_activate_channel and mlx5e_ptp_deactivate_channel as requested by Rahul Rameshbabu [2] v2 -> v3: - Fix commit message subject - call netif_queue_set_napi in mlx5e_ptp_activate_channel and mlx5e_ptp_deactivate_channel to enable/disable NETDEV_QUEUE_TYPE_RX for the PTP channel. - Modify mlx5e_activate_txqsq and mlx5e_deactivate_txqsq to set NETDEV_QUEUE_TYPE_TX which should take care of all TX queues including QoS/HTB and PTP. - Rearrange mlx5e_activate_channel and mlx5e_deactivate_channel for better ordering when setting and unsetting NETDEV_QUEUE_TYPE_RX NAPI structs v1 -> v2: - Move netlink NULL code to mlx5e_deactivate_channel - Move netif_napi_set_irq to mlx5e_open_channel and avoid storing the irq, after netif_napi_add which itself sets the IRQ to -1 [1]: https://lore.kernel.org/all/8c083e6d-5fcd-4557-88dd-0f95acdbc747@gmail.com/ [2]: https://lore.kernel.org/all/871q9mz1a0.fsf@nvidia.com/ drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c | 5 ++++- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++++++ 2 files changed, 11 insertions(+), 1 deletion(-)