diff mbox series

[v6] net/mlx5: Reclaim max 50K pages at once

Message ID 20240627182443.19254-1-anand.a.khoje@oracle.com (mailing list archive)
State Superseded
Headers show
Series [v6] net/mlx5: Reclaim max 50K pages at once | expand

Commit Message

Anand Khoje June 27, 2024, 6:24 p.m. UTC
In non FLR context, at times CX-5 requests release of ~8 million FW pages.
This needs humongous number of cmd mailboxes, which to be released once
the pages are reclaimed. Release of humongous number of cmd mailboxes is
consuming cpu time running into many seconds. Which with non preemptible
kernels is leading to critical process starving on that cpu’s RQ.
To alleviate this, this change restricts the total number of pages
a worker will try to reclaim maximum 50K pages in one go.
The limit 50K is aligned with the current firmware capacity/limit of
releasing 50K pages at once per MLX5_CMD_OP_MANAGE_PAGES + MLX5_PAGES_TAKE
device command.

Our tests have shown significant benefit of this change in terms of
time consumed by dma_pool_free().
During a test where an event was raised by HCA
to release 1.3 Million pages, following observations were made:

- Without this change:
Number of mailbox messages allocated was around 20K, to accommodate
the DMA addresses of 1.3 million pages.
The average time spent by dma_pool_free() to free the DMA pool is between
16 usec to 32 usec.
           value  ------------- Distribution ------------- count
             256 |                                         0
             512 |@                                        287
            1024 |@@@                                      1332
            2048 |@                                        656
            4096 |@@@@@                                    2599
            8192 |@@@@@@@@@@                               4755
           16384 |@@@@@@@@@@@@@@@                          7545
           32768 |@@@@@                                    2501
           65536 |                                         0

- With this change:
Number of mailbox messages allocated was around 800; this was to
accommodate DMA addresses of only 50K pages.
The average time spent by dma_pool_free() to free the DMA pool in this case
lies between 1 usec to 2 usec.
           value  ------------- Distribution ------------- count
             256 |                                         0
             512 |@@@@@@@@@@@@@@@@@@                       346
            1024 |@@@@@@@@@@@@@@@@@@@@@@                   435
            2048 |                                         0
            4096 |                                         0
            8192 |                                         1
           16384 |                                         0

Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
---
Changes in v6
 - Added comments to explain usage os negative MAX_RECLAIM_NPAGES
---
 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Zhu Yanjun June 28, 2024, 7:57 a.m. UTC | #1
在 2024/6/28 2:24, Anand Khoje 写道:
> In non FLR context, at times CX-5 requests release of ~8 million FW pages.
> This needs humongous number of cmd mailboxes, which to be released once
> the pages are reclaimed. Release of humongous number of cmd mailboxes is
> consuming cpu time running into many seconds. Which with non preemptible
> kernels is leading to critical process starving on that cpu’s RQ.
> To alleviate this, this change restricts the total number of pages
> a worker will try to reclaim maximum 50K pages in one go.
> The limit 50K is aligned with the current firmware capacity/limit of
> releasing 50K pages at once per MLX5_CMD_OP_MANAGE_PAGES + MLX5_PAGES_TAKE
> device command.
> 
> Our tests have shown significant benefit of this change in terms of
> time consumed by dma_pool_free().
> During a test where an event was raised by HCA
> to release 1.3 Million pages, following observations were made:
> 
> - Without this change:
> Number of mailbox messages allocated was around 20K, to accommodate
> the DMA addresses of 1.3 million pages.
> The average time spent by dma_pool_free() to free the DMA pool is between
> 16 usec to 32 usec.
>             value  ------------- Distribution ------------- count
>               256 |                                         0
>               512 |@                                        287
>              1024 |@@@                                      1332
>              2048 |@                                        656
>              4096 |@@@@@                                    2599
>              8192 |@@@@@@@@@@                               4755
>             16384 |@@@@@@@@@@@@@@@                          7545
>             32768 |@@@@@                                    2501
>             65536 |                                         0
> 
> - With this change:
> Number of mailbox messages allocated was around 800; this was to
> accommodate DMA addresses of only 50K pages.
> The average time spent by dma_pool_free() to free the DMA pool in this case
> lies between 1 usec to 2 usec.
>             value  ------------- Distribution ------------- count
>               256 |                                         0
>               512 |@@@@@@@@@@@@@@@@@@                       346
>              1024 |@@@@@@@@@@@@@@@@@@@@@@                   435
>              2048 |                                         0
>              4096 |                                         0
>              8192 |                                         1
>             16384 |                                         0
> 
> Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com>
> ---
> Changes in v6
>   - Added comments to explain usage os negative MAX_RECLAIM_NPAGES
> ---
>   drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 16 +++++++++++++++-
>   1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
> index d894a88..972e8e9 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
> @@ -608,6 +608,11 @@ enum {
>   	RELEASE_ALL_PAGES_MASK = 0x4000,
>   };
>   
> +/* This limit is based on the capability of the firmware as it cannot release
> + * more than 50000 back to the host in one go.
> + */
> +#define MAX_RECLAIM_NPAGES (-50000)
> +
>   static int req_pages_handler(struct notifier_block *nb,
>   			     unsigned long type, void *data)
>   {
> @@ -639,7 +644,16 @@ static int req_pages_handler(struct notifier_block *nb,
>   
>   	req->dev = dev;
>   	req->func_id = func_id;
> -	req->npages = npages;
> +
> +	/* npages > 0 means HCA asking host to allocate/give pages,
> +	 * npages < 0 means HCA asking host to reclaim back the pages allocated.
> +	 * Here we are restricting the maximum number of pages that can be
> +	 * reclaimed to be MAX_RECLAIM_NPAGES. Note that MAX_RECLAIM_NPAGES is
> +	 * a negative value.
> +	 * Since MAX_RECLAIM is negative, we are using max() to restrict
> +	 * req->npages (and not min ()).
> +	 */

Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>

Thanks,
Zhu Yanjun

> +	req->npages = max_t(s32, npages, MAX_RECLAIM_NPAGES);
>   	req->ec_function = ec_function;
>   	req->release_all = release_all;
>   	INIT_WORK(&req->work, pages_work_handler);
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
index d894a88..972e8e9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
@@ -608,6 +608,11 @@  enum {
 	RELEASE_ALL_PAGES_MASK = 0x4000,
 };
 
+/* This limit is based on the capability of the firmware as it cannot release
+ * more than 50000 back to the host in one go.
+ */
+#define MAX_RECLAIM_NPAGES (-50000)
+
 static int req_pages_handler(struct notifier_block *nb,
 			     unsigned long type, void *data)
 {
@@ -639,7 +644,16 @@  static int req_pages_handler(struct notifier_block *nb,
 
 	req->dev = dev;
 	req->func_id = func_id;
-	req->npages = npages;
+
+	/* npages > 0 means HCA asking host to allocate/give pages,
+	 * npages < 0 means HCA asking host to reclaim back the pages allocated.
+	 * Here we are restricting the maximum number of pages that can be
+	 * reclaimed to be MAX_RECLAIM_NPAGES. Note that MAX_RECLAIM_NPAGES is
+	 * a negative value.
+	 * Since MAX_RECLAIM is negative, we are using max() to restrict
+	 * req->npages (and not min ()).
+	 */
+	req->npages = max_t(s32, npages, MAX_RECLAIM_NPAGES);
 	req->ec_function = ec_function;
 	req->release_all = release_all;
 	INIT_WORK(&req->work, pages_work_handler);