diff mbox series

[mlx5-next,1/4] RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write

Message ID 7e8f55e31572c1702d69cae015a395d3a824a38a.1681131553.git.leon@kernel.org (mailing list archive)
State Accepted
Headers show
Series Allow relaxed ordering read in VFs and VMs | expand

Commit Message

Leon Romanovsky April 10, 2023, 1:07 p.m. UTC
From: Avihai Horon <avihaih@nvidia.com>

pcie_relaxed_ordering_enabled() check was added to avoid a syndrome when
creating a MKey with relaxed ordering (RO) enabled when the driver's
relaxed_ordering_{read,write} HCA capabilities are out of sync with FW.

While this can happen with relaxed_ordering_read, it can't happen with
relaxed_ordering_write as it's set if the device supports RO write,
regardless of RO in PCI config space, and thus can't change during
runtime.

Therefore, drop the pcie_relaxed_ordering_enabled() check for
relaxed_ordering_write while keeping it for relaxed_ordering_read.
Doing so will also allow the usage of RO write in VFs and VMs (where RO
in PCI config space is not reported/emulated properly).

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
 drivers/infiniband/hw/mlx5/mr.c                     | 6 +++---
 drivers/net/ethernet/mellanox/mlx5/core/en/params.c | 3 +--
 drivers/net/ethernet/mellanox/mlx5/core/en_common.c | 2 +-
 3 files changed, 5 insertions(+), 6 deletions(-)

Comments

Jacob Keller April 11, 2023, 11:18 p.m. UTC | #1
On 4/10/2023 6:07 AM, Leon Romanovsky wrote:
> From: Avihai Horon <avihaih@nvidia.com>
> 
> pcie_relaxed_ordering_enabled() check was added to avoid a syndrome when
> creating a MKey with relaxed ordering (RO) enabled when the driver's
> relaxed_ordering_{read,write} HCA capabilities are out of sync with FW.
> 
> While this can happen with relaxed_ordering_read, it can't happen with
> relaxed_ordering_write as it's set if the device supports RO write,
> regardless of RO in PCI config space, and thus can't change during
> runtime.
> 
> Therefore, drop the pcie_relaxed_ordering_enabled() check for
> relaxed_ordering_write while keeping it for relaxed_ordering_read.
> Doing so will also allow the usage of RO write in VFs and VMs (where RO
> in PCI config space is not reported/emulated properly).
> 
> Signed-off-by: Avihai Horon <avihaih@nvidia.com>
> Reviewed-by: Shay Drory <shayd@nvidia.com>
> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
> ---

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 347000d30cec..bb8f318bd5a5 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -69,11 +69,11 @@  static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
 	MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
 	MLX5_SET(mkc, mkc, lr, 1);
 
-	if ((acc & IB_ACCESS_RELAXED_ORDERING) &&
-	    pcie_relaxed_ordering_enabled(dev->mdev->pdev)) {
+	if (acc & IB_ACCESS_RELAXED_ORDERING) {
 		if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
 			MLX5_SET(mkc, mkc, relaxed_ordering_write, 1);
-		if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
+		if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read) &&
+		    pcie_relaxed_ordering_enabled(dev->mdev->pdev))
 			MLX5_SET(mkc, mkc, relaxed_ordering_read, 1);
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/params.c b/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
index a21bd1179477..d840a59aec88 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
@@ -867,8 +867,7 @@  static void mlx5e_build_rx_cq_param(struct mlx5_core_dev *mdev,
 static u8 rq_end_pad_mode(struct mlx5_core_dev *mdev, struct mlx5e_params *params)
 {
 	bool lro_en = params->packet_merge.type == MLX5E_PACKET_MERGE_LRO;
-	bool ro = pcie_relaxed_ordering_enabled(mdev->pdev) &&
-		MLX5_CAP_GEN(mdev, relaxed_ordering_write);
+	bool ro = MLX5_CAP_GEN(mdev, relaxed_ordering_write);
 
 	return ro && lro_en ?
 		MLX5_WQ_END_PAD_MODE_NONE : MLX5_WQ_END_PAD_MODE_ALIGN;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
index 4c9a3210600c..993af4c12d90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
@@ -44,7 +44,7 @@  void mlx5e_mkey_set_relaxed_ordering(struct mlx5_core_dev *mdev, void *mkc)
 	bool ro_read = MLX5_CAP_GEN(mdev, relaxed_ordering_read);
 
 	MLX5_SET(mkc, mkc, relaxed_ordering_read, ro_pci_enable && ro_read);
-	MLX5_SET(mkc, mkc, relaxed_ordering_write, ro_pci_enable && ro_write);
+	MLX5_SET(mkc, mkc, relaxed_ordering_write, ro_write);
 }
 
 int mlx5e_create_mkey(struct mlx5_core_dev *mdev, u32 pdn, u32 *mkey)