@@ -426,6 +426,55 @@ rsnd_for_hdmi: endpoint {
};
};
+&rpc {
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
Add the RPC HyperFlash device node along with its partitions to the common ULCB board DTS file. Based on a patch in the BSP by Valentine Barshak. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Changes compared to the BSP: - Update label, - Keep RPC disabled, - Add missing "cypress,hyperflash" compatible value, - Drop leading zeroes from unit addresses, - Use lower-case hexadecimal values. - Enlarge uboot partition, - Drop uboot-env partition. --- arch/arm64/boot/dts/renesas/ulcb.dtsi | 49 +++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)