diff mbox series

[RFC,v3,5/7] dt-bindings: regulator: bd9576 add FET ON-resistance for OCW

Message ID 6793280eb1a3376a1aa4d408a8931202050c828d.1615454845.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Extend regulator notification support | expand

Commit Message

Vaittinen, Matti March 11, 2021, 10:23 a.m. UTC
BD9576MUF provides over-current protection and detection. Current is
measured as voltage loss over external FET. Allow specifying FET's on
resistance so current monitoring limits can be converted to voltages.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
v3:
 - no changes
v2:
 - use standard micro-ohms suffix

 .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Rob Herring (Arm) March 11, 2021, 4:41 p.m. UTC | #1
On Thu, 11 Mar 2021 12:23:33 +0200, Matti Vaittinen wrote:
> BD9576MUF provides over-current protection and detection. Current is
> measured as voltage loss over external FET. Allow specifying FET's on
> resistance so current monitoring limits can be converted to voltages.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
> v3:
>  - no changes
> v2:
>  - use standard micro-ohms suffix
> 
>  .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml:31:35: [error] empty value in block mapping (empty-values)

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:description: "External FET's ON-resistance. Required if VoutS1 OCP/OCW is to be set." is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:rohm,ocw-fet-ron-micro-ohms: None is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'description'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: ignoring, error in schema: patternProperties: regulator-.+: properties: rohm,ocw-fet-ron-micro-ohms
warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml

See https://patchwork.ozlabs.org/patch/1451051

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index b6515a0cee62..9c119c1b1904 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -27,6 +27,11 @@  patternProperties:
       Properties for single regulator.
     $ref: "regulator.yaml#"
 
+    properties:
+      rohm,ocw-fet-ron-micro-ohms:
+      description: External FET's ON-resistance. Required if VoutS1 OCP/OCW is
+        to be set.
+
     required:
       - regulator-name