[v4,0/2] PWM support for HiFive Unleashed

Message

Yash Shah Jan. 21, 2019, 10:20 a.m. UTC

This patch series adds a PWM driver and DT documentation
for HiFive Unleashed board. The patches are mostly based on
Wesley's patch.

v4
- Rename the property sifive,approx-period-ns to sifive,period-ns
- Rename macros with appropriate names
- Remove unused macros
- Rename struct sifive_pwm_device to struct pwm_sifive_ddata
- Rename function prefix as per driver name
- Set deglitch bit before changing output waveform.
- Other minor fixes based upon feedback on v3

v3
- Add a link to the reference manaul
- Use appropriate apis for division operation
- Add check for polarity
- Enable clk before calling clk_get_rate
- Other minor fixes based upon feedback on v2

V2 changed from V1:
- Remove inclusion of dt-bindings/pwm/pwm.h
- Remove artificial alignments
- Replace ioread32/iowrite32 with readl/writel
- Remove camelcase
- Change dev_info to dev_dbg for unnecessary log
- Correct typo in driver name
- Remove use of of_match_ptr macro
- Update the DT compatible strings and Add reference to a common
  versioning document

Yash Shah (2):
  pwm: sifive: Add DT documentation for SiFive PWM Controller
  pwm: sifive: Add a driver for SiFive SoC PWM

 .../devicetree/bindings/pwm/pwm-sifive.txt         |  37 +++
 drivers/pwm/Kconfig                                |  11 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-sifive.c                           | 262 +++++++++++++++++++++
 4 files changed, 311 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt
 create mode 100644 drivers/pwm/pwm-sifive.c