| Message ID | 20200415195422.19866-1-atish.patra@wdc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add UEFI support for RISC-V | expand |
(+ Arvind) On Wed, 15 Apr 2020 at 21:54, Atish Patra <atish.patra@wdc.com> wrote: > > This series adds UEFI support for RISC-V. Currently, only boot time > services have been added. Runtime services will be added in a separate > series. This series depends on some core EFI patches > present in current in efi-next and following other patches. > > U-Boot: Adds the boot hartid under chosen node. > https://lists.denx.de/pipermail/u-boot/2020-April/405726.html > > Linux kernel: 5.7-rc1 > > OpenSBI: master > > Patch 1 just moves arm-stub code to a generic code so that it can be used > across different architecture. > > Patch 3 adds fixmap bindings so that CONFIG_EFI can be compiled and we do not > have create separate config to enable boot time services. > As runtime services are not enabled at this time, full generic early ioremap > support is also not added in this series. > > Patch 4 and 5 adds the PE/COFF header and EFI stub code support for RISC-V > respectively. > > The patches can also be found in following git repo. > > https://github.com/atishp04/linux/tree/wip_uefi_riscv_v3 > > The patches have been verified on Qemu using bootefi command in U-Boot. > > Changes from v2->v3: > 1. Rebased on top of latest efi patches. > 2. Improved handle_kernel_image(). > > Changes from v1->v2: > 1. Rebased on 5.7-rc1. > 2. Fixed minor typos and removed redundant macros/comments. > > Changes from previous version: > 1. Renamed to the generic efi stub macro. > 2. Address all redundant comments. > 3. Supported EFI kernel image with normal booti command. > 4. Removed runtime service related macro defines. > > Atish Patra (5): > efi: Move arm-stub to a common file > include: pe.h: Add RISC-V related PE definition > RISC-V: Define fixmap bindings for generic early ioremap support > RISC-V: Add PE/COFF header for EFI stub > RISC-V: Add EFI stub support. > I had some comments regarding patch #5, but the other ones look fine. Given that there are two series in flight now that touch the same code, I am going to merge the patches #1 and #2 of this series into efi/next. Once the remaining changes are good to go, I can take them as well, but I'll need one of the RISC-V maintainers to ack them first. > arch/arm/Kconfig | 2 +- > arch/arm64/Kconfig | 2 +- > arch/riscv/Kconfig | 21 ++++ > arch/riscv/Makefile | 1 + > arch/riscv/configs/defconfig | 1 + > arch/riscv/include/asm/Kbuild | 1 + > arch/riscv/include/asm/efi.h | 44 +++++++ > arch/riscv/include/asm/fixmap.h | 18 +++ > arch/riscv/include/asm/io.h | 1 + > arch/riscv/include/asm/sections.h | 13 ++ > arch/riscv/kernel/Makefile | 4 + > arch/riscv/kernel/efi-header.S | 99 ++++++++++++++++ > arch/riscv/kernel/head.S | 16 +++ > arch/riscv/kernel/image-vars.h | 53 +++++++++ > arch/riscv/kernel/vmlinux.lds.S | 20 +++- > drivers/firmware/efi/Kconfig | 4 +- > drivers/firmware/efi/libstub/Makefile | 19 ++- > .../efi/libstub/{arm-stub.c => efi-stub.c} | 0 > drivers/firmware/efi/libstub/riscv-stub.c | 111 ++++++++++++++++++ > include/linux/pe.h | 3 + > 20 files changed, 421 insertions(+), 12 deletions(-) > create mode 100644 arch/riscv/include/asm/efi.h > create mode 100644 arch/riscv/include/asm/sections.h > create mode 100644 arch/riscv/kernel/efi-header.S > create mode 100644 arch/riscv/kernel/image-vars.h > rename drivers/firmware/efi/libstub/{arm-stub.c => efi-stub.c} (100%) > create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c > > -- > 2.24.0 >
This series adds UEFI support for RISC-V. Currently, only boot time services have been added. Runtime services will be added in a separate series. This series depends on some core EFI patches present in current in efi-next and following other patches. U-Boot: Adds the boot hartid under chosen node. https://lists.denx.de/pipermail/u-boot/2020-April/405726.html Linux kernel: 5.7-rc1 OpenSBI: master Patch 1 just moves arm-stub code to a generic code so that it can be used across different architecture. Patch 3 adds fixmap bindings so that CONFIG_EFI can be compiled and we do not have create separate config to enable boot time services. As runtime services are not enabled at this time, full generic early ioremap support is also not added in this series. Patch 4 and 5 adds the PE/COFF header and EFI stub code support for RISC-V respectively. The patches can also be found in following git repo. https://github.com/atishp04/linux/tree/wip_uefi_riscv_v3 The patches have been verified on Qemu using bootefi command in U-Boot. Changes from v2->v3: 1. Rebased on top of latest efi patches. 2. Improved handle_kernel_image(). Changes from v1->v2: 1. Rebased on 5.7-rc1. 2. Fixed minor typos and removed redundant macros/comments. Changes from previous version: 1. Renamed to the generic efi stub macro. 2. Address all redundant comments. 3. Supported EFI kernel image with normal booti command. 4. Removed runtime service related macro defines. Atish Patra (5): efi: Move arm-stub to a common file include: pe.h: Add RISC-V related PE definition RISC-V: Define fixmap bindings for generic early ioremap support RISC-V: Add PE/COFF header for EFI stub RISC-V: Add EFI stub support. arch/arm/Kconfig | 2 +- arch/arm64/Kconfig | 2 +- arch/riscv/Kconfig | 21 ++++ arch/riscv/Makefile | 1 + arch/riscv/configs/defconfig | 1 + arch/riscv/include/asm/Kbuild | 1 + arch/riscv/include/asm/efi.h | 44 +++++++ arch/riscv/include/asm/fixmap.h | 18 +++ arch/riscv/include/asm/io.h | 1 + arch/riscv/include/asm/sections.h | 13 ++ arch/riscv/kernel/Makefile | 4 + arch/riscv/kernel/efi-header.S | 99 ++++++++++++++++ arch/riscv/kernel/head.S | 16 +++ arch/riscv/kernel/image-vars.h | 53 +++++++++ arch/riscv/kernel/vmlinux.lds.S | 20 +++- drivers/firmware/efi/Kconfig | 4 +- drivers/firmware/efi/libstub/Makefile | 19 ++- .../efi/libstub/{arm-stub.c => efi-stub.c} | 0 drivers/firmware/efi/libstub/riscv-stub.c | 111 ++++++++++++++++++ include/linux/pe.h | 3 + 20 files changed, 421 insertions(+), 12 deletions(-) create mode 100644 arch/riscv/include/asm/efi.h create mode 100644 arch/riscv/include/asm/sections.h create mode 100644 arch/riscv/kernel/efi-header.S create mode 100644 arch/riscv/kernel/image-vars.h rename drivers/firmware/efi/libstub/{arm-stub.c => efi-stub.c} (100%) create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c -- 2.24.0