| Message ID | 20220908142914.359777-1-cristian.ciocaltea@collabora.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Enable initial support for StarFive VisionFive V1 SBC | expand |
Please let me know if there is anything else missing in order to get this queued for merging. Thanks, Cristian On 9/8/22 17:29, Cristian Ciocaltea wrote: > The StarFive VisionFive V1 SBC [1] is similar with the already supported > BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. > > In addition to documenting the necessary compatibles, this patch series > moves most of the content from jh7100-beaglev-starlight.dts to a new file > jh7100-common.dtsi, to be shared between the two boards. > > No other changes are required in order to successfully boot the board. > > [1] https://github.com/starfive-tech/VisionFive > > Changes in v3: > - Added Reviewed-by tag from Krzysztof in patch 1/3 > - Optimized patch 2/3 by enabling copy detection on "git format-patch", > as indicated by Krzysztof > > Changes in v2: > - Simplified documentation by using 'enum' instead of 'const' in > patch 1/3, according to Conor's review > - Added Reviewed-by tags from Conor > > Cristian Ciocaltea (3): > dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board > riscv: dts: starfive: Add common DT for JH7100 based boards > riscv: dts: starfive: Add StarFive VisionFive V1 device tree > > .../devicetree/bindings/riscv/starfive.yaml | 4 +- > arch/riscv/boot/dts/starfive/Makefile | 2 +- > .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- > ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - > .../jh7100-starfive-visionfive-v1.dts | 20 +++ > 5 files changed, 25 insertions(+), 157 deletions(-) > copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) > create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts >
On Mon, Oct 03, 2022 at 02:06:32PM +0300, Cristian Ciocaltea wrote: > Please let me know if there is anything else missing in order to get this > queued for merging. Hey Cristian, LinusW has applied a conflicting change for 6.1 as he renamed the pinctrl header that you have moved from one file to another in this patch [0]. Could you rebase once that lands upstream please? Thanks, Conor. 0 - https://lore.kernel.org/linux-riscv/CACRpkdZmmMjVwpHxkJP+Ui0XJgrdZx8kpVybifbwkRB1_uMhAg@mail.gmail.com/ > > Thanks, > Cristian > > On 9/8/22 17:29, Cristian Ciocaltea wrote: > > The StarFive VisionFive V1 SBC [1] is similar with the already supported > > BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. > > > > In addition to documenting the necessary compatibles, this patch series > > moves most of the content from jh7100-beaglev-starlight.dts to a new file > > jh7100-common.dtsi, to be shared between the two boards. > > > > No other changes are required in order to successfully boot the board. > > > > [1] https://github.com/starfive-tech/VisionFive > > > > Changes in v3: > > - Added Reviewed-by tag from Krzysztof in patch 1/3 > > - Optimized patch 2/3 by enabling copy detection on "git format-patch", > > as indicated by Krzysztof > > > > Changes in v2: > > - Simplified documentation by using 'enum' instead of 'const' in > > patch 1/3, according to Conor's review > > - Added Reviewed-by tags from Conor > > > > Cristian Ciocaltea (3): > > dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board > > riscv: dts: starfive: Add common DT for JH7100 based boards > > riscv: dts: starfive: Add StarFive VisionFive V1 device tree > > > > .../devicetree/bindings/riscv/starfive.yaml | 4 +- > > arch/riscv/boot/dts/starfive/Makefile | 2 +- > > .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- > > ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - > > .../jh7100-starfive-visionfive-v1.dts | 20 +++ > > 5 files changed, 25 insertions(+), 157 deletions(-) > > copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) > > create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts > > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv >
On 10/4/22 12:52, Conor Dooley wrote: > On Mon, Oct 03, 2022 at 02:06:32PM +0300, Cristian Ciocaltea wrote: >> Please let me know if there is anything else missing in order to get this >> queued for merging. > > Hey Cristian, > > LinusW has applied a conflicting change for 6.1 as he renamed the > pinctrl header that you have moved from one file to another in this > patch [0]. Could you rebase once that lands upstream please? Hi Conor, Sure, I will rebase as soon as rc1 is out. Thanks, Cristian > > Thanks, > Conor. > > 0 - https://lore.kernel.org/linux-riscv/CACRpkdZmmMjVwpHxkJP+Ui0XJgrdZx8kpVybifbwkRB1_uMhAg@mail.gmail.com/ > >> >> Thanks, >> Cristian >> >> On 9/8/22 17:29, Cristian Ciocaltea wrote: >>> The StarFive VisionFive V1 SBC [1] is similar with the already supported >>> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. >>> >>> In addition to documenting the necessary compatibles, this patch series >>> moves most of the content from jh7100-beaglev-starlight.dts to a new file >>> jh7100-common.dtsi, to be shared between the two boards. >>> >>> No other changes are required in order to successfully boot the board. >>> >>> [1] https://github.com/starfive-tech/VisionFive >>> >>> Changes in v3: >>> - Added Reviewed-by tag from Krzysztof in patch 1/3 >>> - Optimized patch 2/3 by enabling copy detection on "git format-patch", >>> as indicated by Krzysztof >>> >>> Changes in v2: >>> - Simplified documentation by using 'enum' instead of 'const' in >>> patch 1/3, according to Conor's review >>> - Added Reviewed-by tags from Conor >>> >>> Cristian Ciocaltea (3): >>> dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board >>> riscv: dts: starfive: Add common DT for JH7100 based boards >>> riscv: dts: starfive: Add StarFive VisionFive V1 device tree >>> >>> .../devicetree/bindings/riscv/starfive.yaml | 4 +- >>> arch/riscv/boot/dts/starfive/Makefile | 2 +- >>> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- >>> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - >>> .../jh7100-starfive-visionfive-v1.dts | 20 +++ >>> 5 files changed, 25 insertions(+), 157 deletions(-) >>> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) >>> create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts >>> >> >> _______________________________________________ >> linux-riscv mailing list >> linux-riscv@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-riscv >>
On 10/4/22 13:15, Cristian Ciocaltea wrote: > On 10/4/22 12:52, Conor Dooley wrote: >> On Mon, Oct 03, 2022 at 02:06:32PM +0300, Cristian Ciocaltea wrote: >>> Please let me know if there is anything else missing in order to get >>> this >>> queued for merging. >> >> Hey Cristian, >> >> LinusW has applied a conflicting change for 6.1 as he renamed the >> pinctrl header that you have moved from one file to another in this >> patch [0]. Could you rebase once that lands upstream please? > > Hi Conor, > > Sure, I will rebase as soon as rc1 is out. I have submitted v4: https://lore.kernel.org/all/20221017210542.979051-1-cristian.ciocaltea@collabora.com/ > Thanks, > Cristian > >> >> Thanks, >> Conor. >> >> 0 - >> https://lore.kernel.org/linux-riscv/CACRpkdZmmMjVwpHxkJP+Ui0XJgrdZx8kpVybifbwkRB1_uMhAg@mail.gmail.com/ >> >>> >>> Thanks, >>> Cristian >>> >>> On 9/8/22 17:29, Cristian Ciocaltea wrote: >>>> The StarFive VisionFive V1 SBC [1] is similar with the already >>>> supported >>>> BeagleV Starlight Beta board, both being based on the StarFive >>>> JH7100 SoC. >>>> >>>> In addition to documenting the necessary compatibles, this patch series >>>> moves most of the content from jh7100-beaglev-starlight.dts to a new >>>> file >>>> jh7100-common.dtsi, to be shared between the two boards. >>>> >>>> No other changes are required in order to successfully boot the board. >>>> >>>> [1] https://github.com/starfive-tech/VisionFive >>>> >>>> Changes in v3: >>>> - Added Reviewed-by tag from Krzysztof in patch 1/3 >>>> - Optimized patch 2/3 by enabling copy detection on "git >>>> format-patch", >>>> as indicated by Krzysztof >>>> >>>> Changes in v2: >>>> - Simplified documentation by using 'enum' instead of 'const' in >>>> patch 1/3, according to Conor's review >>>> - Added Reviewed-by tags from Conor >>>> >>>> Cristian Ciocaltea (3): >>>> dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board >>>> riscv: dts: starfive: Add common DT for JH7100 based boards >>>> riscv: dts: starfive: Add StarFive VisionFive V1 device tree >>>> >>>> .../devicetree/bindings/riscv/starfive.yaml | 4 +- >>>> arch/riscv/boot/dts/starfive/Makefile | 2 +- >>>> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 >>>> +----------------- >>>> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - >>>> .../jh7100-starfive-visionfive-v1.dts | 20 +++ >>>> 5 files changed, 25 insertions(+), 157 deletions(-) >>>> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts >>>> => jh7100-common.dtsi} (96%) >>>> create mode 100644 >>>> arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts >>>> >>> >>> _______________________________________________ >>> linux-riscv mailing list >>> linux-riscv@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-riscv >>>
The StarFive VisionFive V1 SBC [1] is similar with the already supported BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. In addition to documenting the necessary compatibles, this patch series moves most of the content from jh7100-beaglev-starlight.dts to a new file jh7100-common.dtsi, to be shared between the two boards. No other changes are required in order to successfully boot the board. [1] https://github.com/starfive-tech/VisionFive Changes in v3: - Added Reviewed-by tag from Krzysztof in patch 1/3 - Optimized patch 2/3 by enabling copy detection on "git format-patch", as indicated by Krzysztof Changes in v2: - Simplified documentation by using 'enum' instead of 'const' in patch 1/3, according to Conor's review - Added Reviewed-by tags from Conor Cristian Ciocaltea (3): dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board riscv: dts: starfive: Add common DT for JH7100 based boards riscv: dts: starfive: Add StarFive VisionFive V1 device tree .../devicetree/bindings/riscv/starfive.yaml | 4 +- arch/riscv/boot/dts/starfive/Makefile | 2 +- .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - .../jh7100-starfive-visionfive-v1.dts | 20 +++ 5 files changed, 25 insertions(+), 157 deletions(-) copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts