mbox series

[v8,0/5] Add JH7110 USB PHY driver support

Message ID 20230629075115.11934-1-minda.chen@starfivetech.com (mailing list archive)
Headers show
Series Add JH7110 USB PHY driver support | expand

Message

Minda Chen June 29, 2023, 7:51 a.m. UTC
This patchset adds USB and PCIe PHY for the StarFive JH7110 SoC.
The patch has been tested on the VisionFive 2 board.

This patchset is base on v6.4-rc6

patch 1 is usb phy dt-binding document.
patch 2 is Pcie PHY dt-binding document.
patch 3 is USB 2.0 PHY driver.
patch 4 is PCIe PHY driver.
patch 5 is PCIe PHY dts

Previous version are merged with USB controller patch.
For USB controller patch is accepted. Now remove the USB controller patch.
And remove the dependency.

previous change can be seen list below.
(start from old patch set v3)
v3: https://patchwork.kernel.org/project/linux-phy/cover/20230315104411.73614-1-minda.chen@starfivetech.com/
v4: https://patchwork.kernel.org/project/linux-phy/cover/20230406015216.27034-1-minda.chen@starfivetech.com/
v5: https://patchwork.kernel.org/project/linux-phy/cover/20230420110052.3182-1-minda.chen@starfivetech.com/
v6: https://patchwork.kernel.org/project/linux-phy/cover/20230518112750.57924-1-minda.chen@starfivetech.com/
v7: https://patchwork.kernel.org/project/linux-phy/cover/20230619094759.21013-1-minda.chen@starfivetech.com/

changes:
v8:
  (patch 3) remame  jh7110_usb2_mode_set to usb2_set_ls_keeplive . make function more accurate.
  (patch 4) remove depend on USB_PHY and fix compile robot error.

v7:
  (patch3 and patch 4) Add /driver/phy/starfive directory, Makefile and Kconfig. Remove the dependency.
  (patch 5) add PCIe PHY dts configuration. (USB 2.0 PHY clock reply on other patch, Dont add this first).
  
v6:
  1. (patch 3) remove the platform remove function.
  2. (patch 4)
     - add switch to pcie mode function.
     - remove the redundant init/exit function.

v5:
  1. (patch 1) set correct model name and commit title.
  2. (patch 2) change to '-item' in syscon property. change commit title.

v4:
  1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
  2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
  3. (patch 3)
     - split PCIe PHY driver to patch 4.
     - replace dr_mode to phy mode in jh7110_usb2_phy.
  4. (patch 4) 
     - Makefile and Kconfig sorted by alphabet sequence.
     - Add PCIe PHY stg and syscon PHY connection configuration
       for USB 3.0.

v3:
  1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc. 
     USB PHY codes are moved to patch 3 and patch 4.

Minda Chen (5):
  dt-bindings: phy: Add StarFive JH7110 USB PHY
  dt-bindings: phy: Add StarFive JH7110 PCIe PHY
  phy: starfive: Add JH7110 USB 2.0 PHY driver
  phy: starfive: Add JH7110 PCIE 2.0 PHY driver
  riscv: dts: starfive: Add PCIe PHY dts configuration for JH7110

 .../phy/starfive,jh7110-pcie-phy.yaml         |  58 +++++
 .../bindings/phy/starfive,jh7110-usb-phy.yaml |  50 +++++
 MAINTAINERS                                   |   8 +
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  12 ++
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/starfive/Kconfig                  |  24 +++
 drivers/phy/starfive/Makefile                 |   3 +
 drivers/phy/starfive/phy-jh7110-pcie.c        | 204 ++++++++++++++++++
 drivers/phy/starfive/phy-jh7110-usb.c         | 152 +++++++++++++
 10 files changed, 513 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
 create mode 100644 drivers/phy/starfive/Kconfig
 create mode 100644 drivers/phy/starfive/Makefile
 create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
 create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c


base-commit: 858fd168a95c5b9669aac8db6c14a9aeab446375

Comments

Vinod Koul July 11, 2023, 11:25 a.m. UTC | #1
On Thu, 29 Jun 2023 15:51:10 +0800, Minda Chen wrote:
> This patchset adds USB and PCIe PHY for the StarFive JH7110 SoC.
> The patch has been tested on the VisionFive 2 board.
> 
> This patchset is base on v6.4-rc6
> 
> patch 1 is usb phy dt-binding document.
> patch 2 is Pcie PHY dt-binding document.
> patch 3 is USB 2.0 PHY driver.
> patch 4 is PCIe PHY driver.
> patch 5 is PCIe PHY dts
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: phy: Add StarFive JH7110 USB PHY
      commit: 6172141bf8ce6ec8f0b5d33533bf5a5646880e3c
[2/5] dt-bindings: phy: Add StarFive JH7110 PCIe PHY
      commit: 2b236fd4912141074a1cf34a7b3ef724d5bc8d8d
[3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver
      commit: 7ac349186842972ee2b17413a0eee34231324eb1
[4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver
      commit: 26cea0e28057d4ee440af4157f13a5312e3918b7

Best regards,