[v10,0/2] riscv: rtc: sophgo: add rtc support for CV1800

Message

Alexander Sverdlin Feb. 13, 2025, 6:46 p.m. UTC

Real Time Clock (RTC) is an independently powered module
within the chip, which includes a 32KHz oscillator and
a Power On Reset/POR submodule. It can be used for time
display and timed alarm generation.

Changes since v9:
- picked up orphaned series;
- further simplified bitmask macros;
- unconditional RTC start (rtc_enable_sec_counter());
- dropped ANA_CALIB modification;
- successfully tested on SG2000;

v9: https://lore.kernel.org/linux-riscv/[e-mail]/

Changes since v8:
- delete unused macros
- using 0/1 instead of the DISABLE/ENABLE macro
- pass in the correct pointer when applying for IRQ
- convert the incoming pointer into an appropriate
  structure pointer in the irq handler

v8: https://lore.kernel.org/all/[e-mail]/

Changes since v7:
- pass checkpatch.pl --strict
- using u32 replace uint32
- using devm_kzalloc(*) replace
  devm_kzalloc(sizeof())
- sort header files alphabetically
- delete unnecessary header files
- fix wrap error
- drop dependent description
- using hardware automatic calibration replace
  software calibration. see documentation 197 page

v7: https://lore.kernel.org/all/[e-mail]/
documentation: https://github.com/milkv-duo/duo-files/blob/main/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf

Changes since v6:
- completely delete POR dt node
- remove syscon tag
- use devm_regmap_init_mmio() replace
  syscon_node_to_regmap

v6: https://lore.kernel.org/all/[e-mail]/

Changes since v5:
- remove unnecessary lock
- fix cv1800_rtc_alarm_irq_enable()
- remove duplicate checks
- using alrm->enabled instead of unconditionally
  enabling
- remove disable alarms on probe
- using rtc_update_irq() replace mess of alarm
- remove leak clk
- useing devm_rtc_allocate_device() and
  devm_rtc_register_device() instead old way
- add judgment for rtc_enable_sec_counter()
- add POR nodes in DTS. This POR device shares
  the register region with the RTC device

v5: https://lore.kernel.org/all/[e-mail]/

Changes since v4:
- remove POR dt-bindings because it empty
- remove MFD dt-bindings because SoC does
  not have MFDs
- add syscon attribute to share registers
  with POR

v4: https://lore.kernel.org/all/[e-mail]/

Changes since v3:
- temporarily not submitting RTC driver code
  waiting for communication with IC designer
- add MFD dt-bindings
- add POR dt-bindings

v3: https://lore.kernel.org/all/[e-mail]/

Changes since v2:
- add mfd support for CV1800
- add rtc to mfd
- using regmap replace iomap
- merge register address in dts

v2: https://lore.kernel.org/lkml/[e-mail]/

Changes since v1
- fix duplicate names in subject
- using RTC replace RTC controller
- improve the properties of dt-bindings
- using `unevaluatedProperties` replace `additionalProperties`
- dt-bindings passed the test
- using `devm_platform_ioremap_resource()` replace
  `platform_get_resource()` and `devm_ioremap_resource()`
- fix random order of the code
- fix wrong wrapping of the `devm_request_irq()` and map the flag with dts
- using devm_clk_get_enabled replace `devm_clk_get()` and
  `clk_prepare_enable()`
- fix return style
- add rtc clock calibration function
- use spinlock when write register on read/set time

v1: https://lore.kernel.org/lkml/[e-mail]/

Jingbao Qiu (2):
  dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC
  rtc: sophgo: add rtc support for Sophgo CV1800 SoC

 .../bindings/rtc/sophgo,cv1800-rtc.yaml       |  53 +++++
 drivers/rtc/Kconfig                           |  10 +
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-cv1800.c                      | 223 ++++++++++++++++++
 4 files changed, 287 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml
 create mode 100644 drivers/rtc/rtc-cv1800.c