mbox series

[v2,0/6] Add ACPI NUMA support for RISC-V

Message ID cover.1709780590.git.haibo1.xu@intel.com (mailing list archive)
Headers show
Series Add ACPI NUMA support for RISC-V | expand

Message

Xu, Haibo1 March 7, 2024, 8:47 a.m. UTC
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].

Patch 1/6 is generated from the acpica PR[2] and should be merged through
the acpica project. Due to this dependency, other 5 patches can only be
merged after the corresponding ACPICA patch was pulled into linux.

Patch 2/6 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 3/6 add the common SRAT RINTC affinity structure handler.
Patch 4/6 remove the '#if defined(CONFIG_ARCH)' condition to make some NUMA
related parse functions common for all current architectures that support
ACPI_NUMA
Patch 5/6 remove ARCH depends option in ACPI_NUMA Kconfig which was no
longer needed since all the current architectures that support ACPI would
select ACPI_NUMA by default.
Patch 6/6 add corresponding ACPI_NUMA config for RISC-V Kconfig.

Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next

[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
[2] https://github.com/acpica/acpica/pull/926

Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
   https://lore.kernel.org/all/20240129094200.3581037-1-haibo1.xu@intel.com/
   https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0

2) Build latest EDK-II
   https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md

3) Build Linux with the following configs enabled
   CONFIG_RISCV_SBI_V01=y
   CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
   CONFIG_HVC_RISCV_SBI=y
   CONFIG_NUMA=y
   CONFIG_ACPI_NUMA=y

4) Build buildroot rootfs.cpio

5) Launch the Qemu machine
   qemu-system-riscv64 -nographic \
   -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
   -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
   -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
   -object memory-backend-ram,size=4G,id=m0 \
   -object memory-backend-ram,size=4G,id=m1 \
   -numa node,memdev=m0,cpus=0-1,nodeid=0 \
   -numa node,memdev=m1,cpus=2-3,nodeid=1 \
   -numa dist,src=0,dst=1,val=30 \
   -kernel linux/arch/riscv/boot/Image \
   -initrd buildroot/output/images/rootfs.cpio \
   -append "root=/dev/ram ro console=hvc0 earlycon=sbi"

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
[    0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
...
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1

---
Changes since v1
  - Switch the order of patch 2/4 and 3/4 - Per Sunil's suggestion
  - Add a new patch 4/6 to make some NUMA related parse functions common
    for all the architectures that support ACPI NUMA - Per Sunil's suggestion
  - Add a new patch 5/6 to remove ARCH depends option in ACPI_NUMA
    Kconfig since all the current architectures that support ACPI
    would select ACPI_NUMA by default - Per Arnd and Sunil's suggestion
  - Other minor fix for code format - Per Sunil's comments

Haibo Xu (6):
  ACPICA: SRAT: Add RISC-V RINTC affinity structure
  ACPI: RISCV: Add NUMA support based on SRAT and SLIT
  ACPI: NUMA: Add handler for SRAT RINTC affinity structure
  ACPI: NUMA: Make some NUMA related parse functions common
  ACPI: NUMA: Remove ARCH depends option in ACPI_NUMA Kconfig
  ACPI: RISCV: Enable ACPI based NUMA

 arch/riscv/Kconfig            |   1 +
 arch/riscv/include/asm/acpi.h |  15 +++-
 arch/riscv/kernel/Makefile    |   1 +
 arch/riscv/kernel/acpi.c      |   5 --
 arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/setup.c     |   4 +-
 arch/riscv/kernel/smpboot.c   |   2 -
 drivers/acpi/numa/Kconfig     |   1 -
 drivers/acpi/numa/srat.c      |  40 ++++++++---
 include/acpi/actbl3.h         |  18 ++++-
 include/linux/acpi.h          |   6 ++
 11 files changed, 203 insertions(+), 21 deletions(-)
 create mode 100644 arch/riscv/kernel/acpi_numa.c

Comments

Haibo Xu March 27, 2024, 12:37 p.m. UTC | #1
Hi @Sunil V L,

Could you please have a review on this patch set?

Thanks,
Haibo

On Thu, Mar 7, 2024 at 4:34 PM Haibo Xu <haibo1.xu@intel.com> wrote:
>
> This patch series enable RISC-V ACPI NUMA support which was based on
> the recently approved ACPI ECR[1].
>
> Patch 1/6 is generated from the acpica PR[2] and should be merged through
> the acpica project. Due to this dependency, other 5 patches can only be
> merged after the corresponding ACPICA patch was pulled into linux.
>
> Patch 2/6 add RISC-V specific acpi_numa.c file to parse NUMA information
> from SRAT and SLIT ACPI tables.
> Patch 3/6 add the common SRAT RINTC affinity structure handler.
> Patch 4/6 remove the '#if defined(CONFIG_ARCH)' condition to make some NUMA
> related parse functions common for all current architectures that support
> ACPI_NUMA
> Patch 5/6 remove ARCH depends option in ACPI_NUMA Kconfig which was no
> longer needed since all the current architectures that support ACPI would
> select ACPI_NUMA by default.
> Patch 6/6 add corresponding ACPI_NUMA config for RISC-V Kconfig.
>
> Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
>
> [1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
> [2] https://github.com/acpica/acpica/pull/926
>
> Testing:
> Since the ACPI AIA/PLIC support patch set is still under upstream review,
> hence it is tested using the poll based HVC SBI console and RAM disk.
> 1) Build latest Qemu with the following patch backported
>    https://lore.kernel.org/all/20240129094200.3581037-1-haibo1.xu@intel.com/
>    https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0
>
> 2) Build latest EDK-II
>    https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
>
> 3) Build Linux with the following configs enabled
>    CONFIG_RISCV_SBI_V01=y
>    CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>    CONFIG_HVC_RISCV_SBI=y
>    CONFIG_NUMA=y
>    CONFIG_ACPI_NUMA=y
>
> 4) Build buildroot rootfs.cpio
>
> 5) Launch the Qemu machine
>    qemu-system-riscv64 -nographic \
>    -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
>    -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
>    -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
>    -object memory-backend-ram,size=4G,id=m0 \
>    -object memory-backend-ram,size=4G,id=m1 \
>    -numa node,memdev=m0,cpus=0-1,nodeid=0 \
>    -numa node,memdev=m1,cpus=2-3,nodeid=1 \
>    -numa dist,src=0,dst=1,val=30 \
>    -kernel linux/arch/riscv/boot/Image \
>    -initrd buildroot/output/images/rootfs.cpio \
>    -append "root=/dev/ram ro console=hvc0 earlycon=sbi"
>
> [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
> [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
> [    0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
> [    0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
> ...
> [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
> [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
> [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
> [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1
>
> ---
> Changes since v1
>   - Switch the order of patch 2/4 and 3/4 - Per Sunil's suggestion
>   - Add a new patch 4/6 to make some NUMA related parse functions common
>     for all the architectures that support ACPI NUMA - Per Sunil's suggestion
>   - Add a new patch 5/6 to remove ARCH depends option in ACPI_NUMA
>     Kconfig since all the current architectures that support ACPI
>     would select ACPI_NUMA by default - Per Arnd and Sunil's suggestion
>   - Other minor fix for code format - Per Sunil's comments
>
> Haibo Xu (6):
>   ACPICA: SRAT: Add RISC-V RINTC affinity structure
>   ACPI: RISCV: Add NUMA support based on SRAT and SLIT
>   ACPI: NUMA: Add handler for SRAT RINTC affinity structure
>   ACPI: NUMA: Make some NUMA related parse functions common
>   ACPI: NUMA: Remove ARCH depends option in ACPI_NUMA Kconfig
>   ACPI: RISCV: Enable ACPI based NUMA
>
>  arch/riscv/Kconfig            |   1 +
>  arch/riscv/include/asm/acpi.h |  15 +++-
>  arch/riscv/kernel/Makefile    |   1 +
>  arch/riscv/kernel/acpi.c      |   5 --
>  arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++
>  arch/riscv/kernel/setup.c     |   4 +-
>  arch/riscv/kernel/smpboot.c   |   2 -
>  drivers/acpi/numa/Kconfig     |   1 -
>  drivers/acpi/numa/srat.c      |  40 ++++++++---
>  include/acpi/actbl3.h         |  18 ++++-
>  include/linux/acpi.h          |   6 ++
>  11 files changed, 203 insertions(+), 21 deletions(-)
>  create mode 100644 arch/riscv/kernel/acpi_numa.c
>
> --
> 2.34.1
>