| Message ID | 170835169709.398.11515115809265577283.tip-bot2@tip-bot2 (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [tip:,irq/urgent] irqchip/sifive-plic: Enable interrupt if needed before EOI | expand |
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c index 5b7bc4f..bf0b40b 100644 --- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -148,7 +148,13 @@ static void plic_irq_eoi(struct irq_data *d) { struct plic_handler *handler = this_cpu_ptr(&plic_handlers); - writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + if (unlikely(irqd_irq_disabled(d))) { + plic_toggle(handler, d->hwirq, 1); + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + plic_toggle(handler, d->hwirq, 0); + } else { + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + } } #ifdef CONFIG_SMP
The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 9c92006b896c767218aabe8947b62026a571cfd0 Gitweb: https://git.kernel.org/tip/9c92006b896c767218aabe8947b62026a571cfd0 Author: Nam Cao <namcao@linutronix.de> AuthorDate: Wed, 31 Jan 2024 09:19:33 +01:00 Committer: Thomas Gleixner <tglx@linutronix.de> CommitterDate: Mon, 19 Feb 2024 15:05:18 +01:00 irqchip/sifive-plic: Enable interrupt if needed before EOI RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as explained in the description of Interrupt Completion in the PLIC spec: "The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored." Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked") ensured that EOI is successful by enabling interrupt first, before EOI. Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") removed the interrupt enabling code from the previous commit, because it assumes that interrupt should already be enabled at the point of EOI. However, this is incorrect: there is a window after a hart claiming an interrupt and before irq_desc->lock getting acquired, interrupt can be disabled during this window. Thus, EOI can be invoked while the interrupt is disabled, effectively nullify this EOI. This results in the interrupt never gets asserted again, and the device who uses this interrupt appears frozen. Make sure that interrupt is really enabled before EOI. Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: linux-riscv@lists.infradead.org Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de --- drivers/irqchip/irq-sifive-plic.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)