[14/20] riscv: provide native clint access for M-mode

Commit Message

Christoph Hellwig Sept. 3, 2019, 9:32 a.m. UTC

RISC-V has the concept of a cpu level interrupt controller.  The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS.  But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.

Add support for IPIs using MMIO using the SiFive clint layout (which is
also shared by Ariane, Kendrye and the Qemu virt platform).  Additional
the MMIO block also support the time value and timer compare registers,
so they are also set up using the same OF node.  Support for other
layouts should also be relatively easy to add in the future.

Signed-off-by: Christoph Hellwig <[e-mail]>
---
 arch/riscv/include/asm/clint.h | 39 ++++++++++++++++++++++++++++++
 arch/riscv/include/asm/sbi.h   |  2 ++
 arch/riscv/kernel/Makefile     |  1 +
 arch/riscv/kernel/clint.c      | 44 ++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/setup.c      |  2 ++
 arch/riscv/kernel/smp.c        | 16 ++++++++++---
 arch/riscv/kernel/smpboot.c    |  4 ++++
 7 files changed, 105 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/include/asm/clint.h
 create mode 100644 arch/riscv/kernel/clint.c

Patch

diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
new file mode 100644
index 000000000000..02a26b68f21d
--- /dev/null
+++ b/arch/riscv/include/asm/clint.h
@@ -0,0 +1,39 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#ifndef _ASM_CLINT_H
+#define _ASM_CLINT_H 1
+
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#ifdef CONFIG_RISCV_M_MODE
+extern u32 __iomem *clint_ipi_base;
+
+void clint_init_boot_cpu(void);
+
+static inline void clint_send_ipi_single(unsigned long hartid)
+{
+	writel(1, clint_ipi_base + hartid);
+}
+
+static inline void clint_send_ipi_mask(const struct cpumask *hartid_mask)
+{
+	int hartid;
+
+	for_each_cpu(hartid, hartid_mask)
+		clint_send_ipi_single(hartid);
+}
+
+static inline void clint_clear_ipi(unsigned long hartid)
+{
+	writel(0, clint_ipi_base + hartid);
+}
+#else /* CONFIG_RISCV_M_MODE */
+#define clint_init_boot_cpu()	do { } while (0)
+
+/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_M_MODE): */
+void clint_send_ipi_single(unsigned long hartid);
+void clint_send_ipi_mask(const struct cpumask *hartid_mask);
+void clint_clear_ipi(unsigned long hartid);
+#endif /* CONFIG_RISCV_M_MODE */
+
+#endif /* _ASM_CLINT_H */
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index a4774bafe033..407d1024f9eb 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -97,6 +97,8 @@  static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 #else /* CONFIG_RISCV_SBI */
 /* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
 void sbi_set_timer(uint64_t stime_value);
+void sbi_clear_ipi(void);
+void sbi_send_ipi(const unsigned long *hart_mask);
 void sbi_remote_fence_i(const unsigned long *hart_mask);
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 21a8d09c298c..b4bfeb62d28a 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -29,6 +29,7 @@  obj-y	+= vdso.o
 obj-y	+= cacheinfo.o
 obj-y	+= vdso/
 
+obj-$(CONFIG_RISCV_M_MODE)	+= clint.o
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
new file mode 100644
index 000000000000..3647980d14c3
--- /dev/null
+++ b/arch/riscv/kernel/clint.c
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Christoph Hellwig.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
+#include <asm/clint.h>
+#include <asm/csr.h>
+#include <asm/timex.h>
+#include <asm/smp.h>
+
+/*
+ * This is the layout used by the SiFive clint, which is also shared by the qemu
+ * virt platform, and the Kendryte KD210 at least.
+ */
+#define CLINT_IPI_OFF		0
+#define CLINT_TIME_CMP_OFF	0x4000
+#define CLINT_TIME_VAL_OFF	0xbff8
+
+u32 __iomem *clint_ipi_base;
+
+void clint_init_boot_cpu(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+
+	np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
+	if (!np) {
+		panic("clint not found");
+		return;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base)
+		panic("could not map CLINT");
+
+	clint_ipi_base = base + CLINT_IPI_OFF;
+	riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
+	riscv_time_val = base + CLINT_TIME_VAL_OFF;
+
+	clint_clear_ipi(boot_cpu_hartid);
+}
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index a990a6cb184f..f4ba71b66c73 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -17,6 +17,7 @@ 
 #include <linux/sched/task.h>
 #include <linux/swiotlb.h>
 
+#include <asm/clint.h>
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
@@ -65,6 +66,7 @@  void __init setup_arch(char **cmdline_p)
 	setup_bootmem();
 	paging_init();
 	unflatten_device_tree();
+	clint_init_boot_cpu();
 
 #ifdef CONFIG_SWIOTLB
 	swiotlb_init(1);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 3836760d7aaf..006084463b76 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -14,6 +14,7 @@ 
 #include <linux/seq_file.h>
 #include <linux/delay.h>
 
+#include <asm/clint.h>
 #include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -90,7 +91,10 @@  static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 	smp_mb__after_atomic();
 
 	riscv_cpuid_to_hartid_mask(mask, &hartid_mask);
-	sbi_send_ipi(cpumask_bits(&hartid_mask));
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		sbi_send_ipi(cpumask_bits(&hartid_mask));
+	else
+		clint_send_ipi_mask(&hartid_mask);
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
@@ -101,12 +105,18 @@  static void send_ipi_single(int cpu, enum ipi_message_type op)
 	set_bit(op, &ipi_data[cpu].bits);
 	smp_mb__after_atomic();
 
-	sbi_send_ipi(cpumask_bits(cpumask_of(hartid)));
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		sbi_send_ipi(cpumask_bits(cpumask_of(hartid)));
+	else
+		clint_send_ipi_single(hartid);
 }
 
 static inline void clear_ipi(void)
 {
-	csr_clear(CSR_SIP, SIE_SSIE);
+	if (IS_ENABLED(CONFIG_RISCV_SBI))
+		csr_clear(CSR_SIP, SIE_SSIE);
+	else
+		clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
 }
 
 void riscv_software_interrupt(void)
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 18ae6da5115e..6300b09f1d1d 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -24,6 +24,7 @@ 
 #include <linux/of.h>
 #include <linux/sched/task_stack.h>
 #include <linux/sched/mm.h>
+#include <asm/clint.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -134,6 +135,9 @@  asmlinkage void __init smp_callin(void)
 {
 	struct mm_struct *mm = &init_mm;
 
+	if (!IS_ENABLED(CONFIG_RISCV_SBI))
+		clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
+
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;